Preparation and Properties of High-Density Polyethylene/Silica Composites

2011 ◽  
Vol 279 ◽  
pp. 115-119 ◽  
Author(s):  
Jing Long Gao ◽  
Yan Hui Liu ◽  
Shou Dong Wei
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Thermal Degradation ◽  
Yield Strength ◽  
Silicon Dioxide ◽  
High Density Polyethylene ◽  
High Density ◽  
Breaking Elongation ◽  
Silica Dioxide ◽  
Silicon Dioxide Content

High-density polyethylene (HDPE)/silica composites with different silicon dioxide fraction were prepared by the melting blend method. The effects of silicon dioxide content on the thermal properties and mechanical properties were mainly investigated. The results show that the thermal degradation of the composites shifts towards higher temperatures as the concentration of silicon dioxide is increased. With increasing silica dioxide content, the tension yield strength of HDPE/silicon composites increased, but its breaking elongation decreased. When silicon dioxide content is 5 %, the tension yield strength and its breaking elongation are 29.33 MPa and 102.82 %, respectively.

scholarly journals Mechanical Properties, Wettability and Thermal Degradation of HDPE/Birch Fiber Composite

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1459
Author(s):  
Agbelenko Koffi ◽  
Fayçal Mijiyawa ◽  
Demagna Koffi ◽  
Fouad Erchiqui ◽  
Lotfi Toubal
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Thermal Degradation ◽  
Coupling Agent ◽  
High Density Polyethylene ◽  
Fiber Composite ◽  
Flexural Modulus ◽  
High Density ◽  
Wood Fibers ◽  
Scanning Calorimetry

Wood–plastic composites have emerged and represent an alternative to conventional composites reinforced with synthetic carbon fiber or glass fiber–polymer. A wide variety of wood fibers are used in WPCs including birch fiber. Birch is a common hardwood tree that grows in cool areas such as the province of Quebec, Canada. The effect of the filler proportion on the mechanical properties, wettability, and thermal degradation of high-density polyethylene/birch fiber composite was studied. High-density polyethylene, birch fiber and maleic anhydride polyethylene as coupling agent were mixed and pressed to obtain test specimens. Tensile and flexural tests, scanning electron microscopy, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetry analysis and surface energy measurement were carried out. The tensile elastic modulus increased by 210% as the fiber content reached 50% by weight while the flexural modulus increased by 236%. The water droplet contact angle always exceeded 90°, meaning that the material remained hydrophobic. The thermal decomposition mass loss increased proportional with the percentage of fiber, which degraded at a lower temperature than the HDPE did. Both the storage modulus and the loss modulus increased with the proportion of fiber. Based on differential scanning calorimetry, neither the fiber proportion nor the coupling agent proportion affected the material melting temperature.

Sign in / Sign up

Export Citation Format

Share Document