Study on Application of the Blends of Nitrile Rubber with Acrylate Rubber in the Coat-Metal Sealing Gasket

2011 ◽  
Vol 393-395 ◽  
pp. 1438-1442 ◽  
Author(s):  
Zu Min Qiu ◽  
Chao Yan Qin ◽  
Jun Ming Qiu
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Heat Resistance ◽  
Nitrile Rubber ◽  
Temperature Resistance ◽  
Oil Resistance ◽  
Comprehensive Properties ◽  
The Cost ◽  
Low Temperature Resistance

This paper discussed the effect of different blending ratio with BNR and ACM on the mechanical properties, heat resistance, low temperature resistance and oil resistance of coat-metal sealing gasket. The result showed that the comprehensive properties of the NBR/ACM blends at the ratio of 85/15 were preferable to the NBR and ACM, the low temperature resistance and oil resistance of NBR are taken into account. The cost of the blends were lower than the ACM. The blends can be used for coat-metal sealing gasket instead of NBR.

A Study of Mechanical, Oil Resistance, and Low Temperature Resistance of NBR Vulcanizates

2016 ◽  
Vol 703 ◽  
pp. 165-171 ◽  
Author(s):  
Kwan Ho Seo ◽  
Gi Myeong Nam ◽  
Dong Gug Kang ◽  
Gi Hong Kim ◽  
Do Young Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Testing Machine ◽  
Butadiene Rubber ◽  
Scanning Calorimetry ◽  
Temperature Resistance ◽  
Oil Resistance ◽  
Universal Testing ◽  
Optimum Formulation ◽  
Low Temperature Resistance

In this study, mechanical properties, oil resistance of Nitrile Butadiene Rubber (NBR) as material of an automotive were investigated at low temperature conditions. In order to find the optimum formulation used various grades of NBR with different contents of Acrylonitrile (ACN) such as NT1846F, DN407, B7150, B6240 and N215SL. The mechanical properties, oil and low temperature resistance of NBR were measured using moving die rheometer, durometer, universal testing machine, differential scanning calorimetry, and Gehman tester. The hardness was increased with an increased ACN contents. The low temperature resistance, and degree of swelling were increased that decreased ACN contents have lower Tg, lower value of Gehaman test.

scholarly journals Nanostructured Bitumen with Nanocarbon

2019 ◽  
Vol 21 (4) ◽  
pp. 317 ◽  
Author(s):  
B.B. Teltayev ◽  
A.A. Kalybai ◽  
G.G. Izmailova ◽  
S.R. Rossi ◽  
E.D. Amirbayev ◽  
...  
Keyword(s):  
Low Temperature ◽  
Test Methods ◽  
Structure Variation ◽  
Temperature Resistance ◽  
Chemical Indicators ◽  
Excess Surface ◽  
The Cost ◽  
Physical And Chemical ◽  
Low Temperature Resistance

Physical and chemical indicators of bitumen quality of grade BND 70/100 with the added carbon nanopowder 2% by weight have been studied by laboratory test methods and analysis. High reaction ability of nanopowder particles and concentration of excess surface and internal energy in them have been determined, which provide the increase of low-temperature resistance, aggregate strength, and improvement of rheological properties of nanostructured bitumen. Essential structure variation has been proved: the increase of asphaltenes and oils content for 9% and 7.2% respectively due to the decrease of resins for 16.2% by weight. Methods have been discussed for preparing a liquid nanocarbon mix, adding of the mix into bitumen and homogenization of the bitumen. Some economic indicators have been represented which influence essentially the reduction for the cost value of the nanostructure bitumen.

Graphene Oxide-Based Composite Organohydrogels with High Strength and Low Temperature Resistance for Strain Sensors

Soft Matter ◽  
2022 ◽  
Author(s):  
Rui Zhao ◽  
Li Jiang ◽  
Ping Zhang ◽  
Dan Li ◽  
Zhenzhong Guo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Low Temperature ◽  
Rapid Development ◽  
High Strength ◽  
Strain Sensors ◽  
Temperature Resistance ◽  
Polymeric Hydrogel ◽  
Low Temperature Resistance

In the recent years, a rapid development of the polymeric hydrogel-based sensors has been witnessed. However, conventional hydrogels often exhibit poor mechanical properties. Additionally, the use of these sensors at...

PREPARATION OF LOW TEMPERATURE RESISTANT AND HIGH ELECTRICAL INSULATION CHLOROPRENE RUBBER–BUTADIENE RUBBER BLENDS

2014 ◽  
Vol 87 (2) ◽  
pp. 360-369 ◽  
Author(s):  
Junping Zheng ◽  
Jin Tan ◽  
Hong Gao ◽  
Chuanzeng Wang ◽  
Zhilei Dong
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Mechanical Analysis ◽  
Electrical Insulation ◽  
Butadiene Rubber ◽  
Temperature Resistance ◽  
Rubber Blends ◽  
Chloroprene Rubber ◽  
Low Temperature Resistance ◽  
Electrical Insulation Properties

ABSTRACT To satisfy some special demands of many applications in the fields of aerospace and the electronic industry, low temperature resistant and high electrical insulation chloroprene rubber (CR) was prepared by blending pristine CR with different weight ratios of butadiene rubber (BR). The low temperature resistance, electrical insulation properties, and mechanical properties of CR/BR blends were investigated. With increasing BR content, the low temperature resistance and electrical insulation properties were improved, whereas the tensile strength and elongation at break decreased. For the CR/BR (65/35) blend, filled with SiO2, the brittleness temperature (Tb) was reduced to −61 °C and the high electrical insulation properties were obtained without sacrificing mechanical properties too much. The tan δ plots of CR/BR blends, investigated by dynamic mechanical analysis, also revealed that BR could reduce glass transition temperature (Tg) and improve low temperature resistance of CR. The phase contrast microscope images of CR/BR blends demonstrated that the phase structure of the blends changed with increasing BR content. Furthermore, the fracture surfaces of CR/BR blends, observed by scanning electron microscopy, showed that the compatibility of CR/BR blends was poor although the CR/BR blends were homogeneous in macrostructure.

scholarly journals Synthesis of Low Temperature Resistant Hydrogenated Nitrile Rubber Based on Esterification Reaction

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4096
Author(s):  
Lin Wang ◽  
Yanqiang Ni ◽  
Xin Qi ◽  
Liqun Zhang ◽  
Dongmei Yue
Keyword(s):  
Low Temperature ◽  
Nitrile Rubber ◽  
Petroleum Exploration ◽  
Esterification Reaction ◽  
Grafted Polymers ◽  
Scanning Calorimetry ◽  
Temperature Resistance ◽  
Molecular Weights ◽  
Cold Environments ◽  
Low Temperature Resistance

Hydrogenated Nitrile Rubber (HNBR) is widely used in aerospace, petroleum exploration and other fields because of its excellent performances. However, there remains a challenge of balancing the oil resistance and the low temperature resistance for HNBR. In this work, a series of grafted carboxyl nitrile rubber (XNBR) was prepared by the esterification reaction between active functional groups (–COOH) of XNBR and alkanols of different molecular chain lengths (C8H17OH, C12H25OH, C16H33OH, C18H37OH) or Methoxypolyethylene glycols (MPEG) of different molecular weights (Mn = 350, 750, 1000). The structure and low temperature resistance of as-obtained grafted polymers were characterized by Fourier Transform Infrared (FTIR), 1H-NMR and Differential scanning calorimetry (DSC). It was found that the glass transition temperatures (Tg) of grafted XNBR were significantly decreased. MPEG grafted polymers with better low temperature resistance were then selected for hydrogenation. As-prepared hydrogenated XNBR grafted with MPEG-1000 (HXNBR-g-1000) showed the lowest Tg of −29.8 °C and the best low temperature resistance. This work provides a novel and simple preparation method for low temperature resistant HNBR, which might be used potentially in extremely cold environments.

Preparation on Low-Temperature Resistance Nitrile-Butadiene Rubber Coat-Metal Sealing Gasket

2010 ◽  
Vol 152-153 ◽  
pp. 572-579
Author(s):  
Guan Li ◽  
Zu Min Qiu ◽  
Ai Bin Zhu ◽  
Zhong Wei Liu
Keyword(s):  
Low Temperature ◽  
Preparation Method ◽  
Technological Factor ◽  
Butadiene Rubber ◽  
Curing Agent ◽  
Temperature Resistance ◽  
Oil Resistance ◽  
Nitrile Butadiene Rubber ◽  
Reinforcing Agent ◽  
Low Temperature Resistance

The preparation method of low-temperature resistance nitrile-butadiene rubber coat-metal sealing gasket was introduced. The type and the dosage of curing agent, reinforcing agent and other additives were considered, the optimum technological factor was determined. Use of such nitrile-butadiene rubber coat-metal sealing gasket, its low temperature resistance and oil resistance were good enough for the seals which work at -40 -160 .

Preparation of supramolecular silicone elastomersviahomo- and hetero-assembly

2018 ◽  
Vol 42 (3) ◽  
pp. 1973-1978 ◽  
Author(s):  
Jinfeng Cao ◽  
Linglong Feng ◽  
Shengyu Feng
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Self Assembly ◽  
Silicone Elastomers ◽  
Temperature Resistance ◽  
Tunable Mechanical Properties ◽  
Low Temperature Resistance

Supramolecular silicone elastomers were preparedviaself-assembly and they exhibit ultra-low temperature resistance and tunable mechanical properties.

Highly Tough, Freezing-Tolerant, Healable and Thermoplastic Starch/Poly(vinyl alcohol) Organohydrogels for Flexible Electronic Devices

2021 ◽  
Author(s):  
Jing Lu ◽  
Jianfeng Gu ◽  
Oudong Hu ◽  
Yunhan Fu ◽  
Dezhan Ye ◽  
...  
Keyword(s):  
Low Temperature ◽  
Electronic Devices ◽  
Future Generation ◽  
Thermoplastic Starch ◽  
Poly Vinyl Alcohol ◽  
Temperature Resistance ◽  
Large Application ◽  
Conductive Hydrogels ◽  
Low Temperature Resistance ◽  
Application Prospects

The conductive hydrogels have found large application prospects in fabricating flexible multifunctional electronic devices for future-generation wearable human-machine interactions. However, the inferior mechanical strength, low temperature resistance, and non-recyclability induced...

Sign in / Sign up

Export Citation Format

Share Document