Rubber Extruder Present Situation and Developing Trend of History

2011 ◽  
Vol 403-408 ◽  
pp. 3258-3261
Author(s):  
Jun Xi Bi ◽  
Jin Feng Li ◽  
Li Qin Wang ◽  
Xiang Xin He ◽  
Shi Ming Gan

Brief introduction the development history of extruder. The production status of the extrusion at domestic and foreign, and the development trend of the extruder in this paper.

2015 ◽  
Vol 1092-1093 ◽  
pp. 212-215 ◽  
Author(s):  
Yi Dan Wang ◽  
Hong Fu Fan

The development history of fracturing fluids is reviewed, the compositions and action mechanisms of the clean fracturing fluid systems used currently are analyzed, the recent research and application of the clean fracturing fluids in coal—bed methane production are summarized, and the development trend of clean fracturing fluids is presented in this paper.


2014 ◽  
Vol 989-994 ◽  
pp. 710-714
Author(s):  
Hong Mei Liu ◽  
Cheng Qun Wu ◽  
Xin Zhang ◽  
Yuan Bin Xu

By means of raw performance analysis of silt sintered porous brick, the importance of synchronous cutting machine in the molding process was revealed. On basis of the analysis of the present situation of research and application of synchronous cutting machine at home and abroad, according to the forming characteristics of silt sintered porous brick, technical parameters of synchronous cutting machine was explained and the development trend of the synchronous cutting machine was expected.


2014 ◽  
Vol 488-489 ◽  
pp. 137-140 ◽  
Author(s):  
Wei Pan Zhang ◽  
Su Ju Hao ◽  
Wu Feng Jiang ◽  
Qian Qian Ren ◽  
Yu Zhu Zhang

At present steel industry is obtained a rapid development in China. More and more steel slag is accumulated. How to deal with steel slag becomes a hot problem. In this paper, the source, composition and characteristics of steel slag are introduced firstly. Then the methods of comprehensive utilization on the steel slag are summarized. Finally the problems are put up and the development trend of steel slag utilization is prospected according to the present situation of comprehensive utilization of steel slag.


2020 ◽  

This article discusses business papers XII-XIII century from the city of Augsburg, which is located in the south of Germany. The norm of the modern German language went through several stages of formation before acquiring a unified standard and becoming the so-called Standardsprache. The city of Augsburg belongs to the East Bavarian dialect region and is located on the border of Bavaria and Swabia. Analysis of the written language of documents of the XII-XIII century provided information on the interaction of the features of both dialects (Bavarian and Swabian). In this study, 5 documents related to various taxes were considered, which indicate that they were written in Augsburg, as well as 3 documents in the Augsburg monastery. It is important that for the documents considered there is no characteristic sequence in writing, that is, we are talking about the absence of a spelling norm. Confirmation of this fact is also given in the article with examples from the materials studied. The study showed the presence of similar characteristics in all studied, which indicates their undoubted linguistic kinship. Despite this, there are also features that are characteristic exclusively for the southwestern part of Germany and separately for the southeast. An analysis of the German southern dialects makes it possible to trace the development trend of the German language in its holy language in a period that is closely connected with the history of the German people. The processes of synergy between dialects within the framework of one language are considered, which draws attention to the beginning of the formation of the first national language, and subsequently the national one. The study revealed that Augsburg became a kind of conductor of the Bavarian dialect in the eastern part of the Swabian dialect. The isoglosses studied (phonetic, morphological, lexical) showed that these dialects can be combined linguistically as southern and considered a feature of the Germanic (Yerminon) range. Despite some linguistic differences, a relative unity of linguistic traditions is noted, indicating a sufficient proximity of the dialects of the southwestern and southeastern parts of Germany in the XII-XIII centuries.


2010 ◽  
Vol 102-104 ◽  
pp. 762-766
Author(s):  
Hong Wen Du ◽  
Yuan Zheng Yu

With the rapid development of IC and photovoltaic industry, the requirements of larger-diameter, better productivity, higher machining accuracy and finer surface quality of silicon wafers challenge traditional wafer cutting technology. Therefore, in terms of increasing wafers’ diameter, lessening slicing thickness, reducing cutting loss and improving machining efficiency, research and application of precision cutting technology become necessary and urgent. The paper analyzes current well-developed technologies and equipments of free abrasive wire cutting in detail. It is recommended that bonded abrasive diamond wire cutting will be the development trend in the future as a highly-efficient, low material waste and environmentally friendly technology of precise cutting of silicon wafers. The paper also makes a discussion on construction, working principle, and manufacturing technology of bonded abrasive diamond wires.


2013 ◽  
Vol 347-350 ◽  
pp. 98-101
Author(s):  
Ying Xu Zhang ◽  
Quan Qiu ◽  
Quan Ming Zhao ◽  
Wen Gang Zheng

This paper gives a rough review of the intelligent control strategies used in BLDC (Brushless Direct Current) motor controller. The development history of BLDC motor is introduced firstly. The parameter setting problems in a traditional PID control method are analyzed secondly. Then, an intensive introduction on the intelligent control strategies those are used in the PID control system is presented. Finally, the development trend of the intelligent control strategies in the BLDC motor control is discussed.


2013 ◽  
Vol 380-384 ◽  
pp. 4431-4433 ◽  
Author(s):  
Peng Ding ◽  
Quan Jun Liu ◽  
Wen Hao Pang

According to the characteristics of China's manganese ore resources, the present situation of manganese ore beneficiation in China is briefly introduced, and puts forward the development trend of China's manganese ore beneficiation.


2014 ◽  
Vol 496-500 ◽  
pp. 1485-1488
Author(s):  
Lian Fu Yang ◽  
Hong Sun

With the development of the mechanical manufacturing industry, the traditional processing technology already cannot satisfy the needs of the development of the modern manufacturing industry. Numerical control technology has changed the situation. The rational use of numerical control technology in machining will play a crucial role to the development of modern industry. This paper analyzes application of numerical control technology in mechanical manufacturing, through the theory about the present situation of the application of numerical control technology, the development trend of numerical control technology points out the direction for the future.


2021 ◽  
Vol 19 (2) ◽  
pp. 114-120
Author(s):  
Bao Hanshi ◽  
Sularso Sularso ◽  
Marie-Christinne B Clarisse

If the study of Jesse Fewkes and Frances Densmore in the late 19th century is taken into account, western Applied Ethnomusicology is entering its second century. After more than one hundred years of development, Applied Ethnomusicology has basically become a relatively mature research path in the West, which not only provides scholars with a new research perspective but also enriches the subject connotation of Ethnomusicology to a certain extent with its research philosophy and value pursuit. In China, Applied Ethnomusicology has attracted more and more attention. Therefore, reviewing the development history of the discipline is not only conducive to clarifying the development context of the discipline but also conducive to reflecting on the current problems and better grasping the development trend of the discipline. In the first part of this paper, the factors influencing the birth and development of applied ethnomusicology are further discussed from within and outside the discipline, respectively based on consulting relevant literature and briefly summarizing the existing discussions of scholars. The second part mainly discusses the research characteristics of Applied Ethnomusicology, such as "pragmatic orientation", "change of researcher's identity", and "emphasis on intervention and intervention". The third part of the Applied Ethnomusicology on the "intervention", "the definition of" discipline "and the edge of two issues are discussed.


2013 ◽  
Vol 756-759 ◽  
pp. 68-71
Author(s):  
Shi Ming Cao ◽  
Xiao Lin Zhang ◽  
Shu Qin Zeng

This paper introduces the zinc oxide ore flotation process and flotation reagents; analyses the reasons why zinc oxide ore is difficult to concentrate; introduces new techniques of zinc oxide ore dressing; prospects the development trend of zinc oxide ore dressing.


Sign in / Sign up

Export Citation Format

Share Document