Data-Conversion and Displaying for Numerical Simulation of EMCC with FEM-FVM-Joint Method

2011 ◽  
Vol 418-420 ◽  
pp. 563-566
Author(s):  
Hai Jun Gong ◽  
Xin Zhong Li ◽  
Xue Yi Fan ◽  
Da Ming Xu ◽  
Jing Jie Guo
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
General Purpose ◽  
Data Conversion ◽  
Post Processing ◽  
Format Conversion ◽  
Data Format ◽  
Volume Method ◽  
Linear Interpolating ◽  
Joint Method

Abstract. For efficiently performing the numerical simulation of electromagnetic continues casting (EMCC) with finite element method (FEM) and finite volume method (FVM) combined scheme, a program integrates with data-format conversion and post-processing was proposed. The conversion of data format realized by linear interpolating, and the post processor developed on a Visual Fortran 6.6A platform using Fortran-95 language and the QuickWin module. Both 2-D and 3-D EM-FEM data calculated by a general-purpose FEM software, ANSYS, could be converted into FVM-data format using this program, and all FVM-data whether scalar quantities or vector ones could be displayed in the manners of cabinet drawing and normal axonometric drawing, which promises the correctness for data format conversion process of FEM/FVM-joint and the convenient analysis of transport phenomena during EMCC numerical simulation. The results of transport simulations and data format conversions indicate that the format-conversion method as well as the post processing is effective and convenient in numerical simulation with FEM/FVM-joint under various EM fields.

Numerical Simulation and Experimental Study of Flowfield Around a Bullet With a Partial Core

2011 ◽  
Vol 78 (5) ◽  
Author(s):  
Usiel S. Silva ◽  
Juan M. Sandoval ◽  
Luis A. Flores ◽  
Narcizo Muñoz ◽  
Víctor Hernández
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Impact Force ◽  
Fluid Dynamic ◽  
Flight Path ◽  
Post Processing ◽  
Flow Conditions ◽  
Main Factors ◽  
The Impact ◽  
Full Core

The geometry, density and velocity of a typical small caliber bullet, are the main factors that stabilize its flight path, range and the impact force; thus the weight variations can indicate the presence of geometrical irregularities or damages of the bullet core, affecting its dynamic characteristics. Computational finite element method (FEM) with the computational fluid dynamic (CFD) module was used for the numerical simulation of 7.62 mm bullets with partial core, subjected to different air flow conditions. Schlieren images were obtained and with the flow visualization principle, the behavior of the projectile during its flight path was determined. The results of the simulations and the experiments showed that in certain cases, bullets with partial core maintain a stable spin during flight without a considerable variation in its range, keeping constant speed conditions with respect to the full core bullets. The importance of this analysis is found in the fact that post processing activities can be implemented in certain ammunitions with imperfections to improve their use.

Rubber Composition–Properties Relationships during Tire Numerical Simulation and Design Optimization

2017 ◽  
Vol 45 (1) ◽  
pp. 71-84 ◽  
Author(s):  
Alexey Mazin ◽  
Alexander Kapustin ◽  
Mikhail Soloviev ◽  
Alexander Karanets
Keyword(s):  
Numerical Simulation ◽  
Design Optimization ◽  
Strain Tensor ◽  
General Purpose ◽  
Orthogonal Functions ◽  
Element Analysis ◽  
Time Investment ◽  
Footprint Analysis ◽  
Composition Properties ◽  
Nonlinear Elastic

ABSTRACT Numerical simulation based on finite element analysis is now widely used during the design optimization of tires, thereby drastically reducing the time investment in the design process and improving tire performance because it is obtained from the optimized solution. Rubber material models that are used in numerical calculations of stress–strain distributions are nonlinear and may include several parameters. The relations of these parameters with rubber formulations are usually unknown, so the designer has no information on whether the optimal set of parameters is reachable by the rubber technological possibilities. The aim of this work was to develop such relations. The most common approach to derive the equation of the state of rubber is based on the expansion of the strain energy in a series of invariants of the strain tensor. Here, we show that this approach has several drawbacks, one of which is problems that arise when trying to build on its basis the quantitative relations between the rubber composition and its properties. An alternative is to use a series expansion in orthogonal functions, thereby ensuring the linear independence of the coefficients of elasticity in evaluation of the experimental data and the possibility of constructing continuous maps of “the composition to the property.” In the case of orthogonal Legendre polynomials, the technique for constructing such maps is considered, and a set of empirical functions is proposed to adequately describe the dependence of the parameters of nonlinear elastic properties of general-purpose rubbers on the content of the main ingredients. The calculated sets of parameters were used in numerical tire simulations including static loading, footprint analysis, braking/acceleration, and cornering and also in design optimization procedures.

The study of the elastic deformation of a flexible wheel by a cam wave generator

2020 ◽  
Vol 65 (1) ◽  
pp. 51-58
Author(s):  
Sava Ianici
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Elastic Deformation ◽  
Theoretical Study ◽  
Elastic Field ◽  
The Finite Element Method ◽  
Elastic Deformations ◽  
Wave Generator ◽  
Two Stages

The paper presents the results of research on the study of the elastic deformation of a flexible wheel from a double harmonic transmission, under the action of a cam wave generator. Knowing exactly how the flexible wheel is deformed is important in correctly establishing the geometric parameters of the wheels teeth, allowing a better understanding and appreciation of the specific conditions of harmonic gearings in the two stages of the transmission. The veracity of the results of this theoretical study on the calculation of elastic deformations and displacements of points located on the average fiber of the flexible wheel was subsequently verified and confirmed by numerical simulation of the flexible wheel, in the elastic field, using the finite element method from SolidWorks Simulation.

Non-stationary process characteristics of the gas outflow into a liquid

2019 ◽  
Vol 14 (2) ◽  
pp. 82-88
Author(s):  
M.V. Alekseev ◽  
I.S. Vozhakov ◽  
S.I. Lezhnin
Keyword(s):  
Numerical Simulation ◽  
Liquid Column ◽  
Gas Content ◽  
Liquid Lead ◽  
Gas Flows ◽  
Asymptotic Model ◽  
Process Characteristics ◽  
Significant Difference ◽  
Order Of Magnitude ◽  
Volume Method

A numerical simulation of the process of the outflow of gas under pressure into a closed container partially filled with liquid was carried out. For comparative theoretical analysis, an asymptotic model was used with assumptions about the adiabaticity of the gas outflow process and the ideality of the liquid during the oscillatory one-dimensional motion of the liquid column. In this case, the motion of the liquid column and the evolution of pressure in the gas are determined by the equation of dynamics and the balance of enthalpy. Numerical simulation was performed in the OpenFOAM package using the fluid volume method (VOF method) and the standard k-e turbulence model. The evolution of the fields of volumetric gas content, velocity, and pressure during the flow of gas from the high-pressure chamber into a closed channel filled with liquid in the presence of a ”gas blanket“ at the upper end of the channel is obtained. It was shown that the dynamics of pulsations in the gas cavity that occurs when the gas flows into the closed region substantially depends on the physical properties of the liquid in the volume, especially the density. Numerical modeling showed that the injection of gas into water occurs in the form of a jet outflow of gas, and for the outflow into liquid lead, a gas slug is formed at the bottom of the channel. Satisfactory agreement was obtained between the numerical calculation and the calculation according to the asymptotic model for pressure pulsations in a gas projectile in liquid lead. For water, the results of calculations using the asymptotic model give a significant difference from the results of numerical calculations. In all cases, the velocity of the medium obtained by numerical simulation and when using the asymptotic model differ by an order of magnitude or more.

scholarly journals Numerical Simulation of Intrachamber Processes in the Power Plant

2021 ◽  
Vol 11 (11) ◽  
pp. 4990
Author(s):  
Boris Benderskiy ◽  
Peter Frankovský ◽  
Alena Chernova
Keyword(s):  
Numerical Simulation ◽  
Power Plant ◽  
Flow Structure ◽  
Power Plants ◽  
Control Volume ◽  
Conjugate Problem ◽  
Topological Features ◽  
Gas Dynamic ◽  
Calculation Results ◽  
Volume Method

This paper considers the issues of numerical modeling of nonstationary spatial gas dynamics in the pre-nozzle volume of the combustion chamber of a power plant with a cylindrical slot channel at the power plant of the mass supply surface. The numerical simulation for spatial objects is based on the solution conjugate problem of heat exchange by the control volume method in the open integrated platform for numerical simulation of continuum mechanics problems (openFoam). The calculation results for gas-dynamic and thermal processes in the power plant with a four-nozzle cover are presented. The analysis of gas-dynamic parameters and thermal flows near the nozzle cover, depending on the canal geometry, is given. The topological features of the flow structure and thermophysical parameters near the nozzle cap were studied. For the first time, the transformation of topological features of the flow structure in the pre-nozzle volume at changes in the mass channel’s geometry is revealed, described, and analyzed. The dependence of the Nusselt number in the central point of stagnation on the time of the power plants operation is revealed.

Sign in / Sign up

Export Citation Format

Share Document