An High-Performance Water-Based Drilling Fluid and its Application

2012 ◽  
Vol 476-478 ◽  
pp. 2304-2310
Author(s):  
Kai He Lv ◽  
Xue Dong Wu ◽  
Tao Shi ◽  
Kuan Long Ren ◽  
Yu Xia Liu
Keyword(s):  
High Performance ◽  
Filtration Rate ◽  
Drilling Fluid ◽  
Gel Strength ◽  
Field Application ◽  
Wellbore Instability ◽  
Water Based ◽  
Fluid Properties ◽  
Overall Performance ◽  
Inhibition Property

An high-performance water-based drilling fluid is a hot subject of research both at home and abroad in recent years. In this paper, the inhibition property and the influence of amino polyols AP-1 and aluminum polymer DLP-1 on drilling fluid properties were evaluated, on this basis, through the formula optimization, the high-performance water based drilling fluid was developed and and field applied. Both laboratory study and field application showed that aluminum polymer can reduce viscosity and filtration rate, and can effectively inhibit the hydration expansion of clay. Amino polyols had a little effect on the viscosity, gel strength and filtration of drilling fluid, but it had a good shale inhibition. This drilling fluid has good properties in rheology, filtration, inhibition and anti-contamination, with a satisfactory overall performance, which is helpful in solving wellbore instability that are due to unenven hydration or well developed micro fractures.

Development of New Models to Determine the Rheological Parameters of Water-based Drilling Fluid Using Artificial Intelligence

2021 ◽  
Author(s):  
Farqad Hadi ◽  
Ali Noori ◽  
Hussein Hussein ◽  
Ameer Khudhair
Keyword(s):  
Rheological Properties ◽  
High Performance ◽  
Drilling Fluid ◽  
Gel Strength ◽  
Solid Content ◽  
Rheological Parameters ◽  
Water Based ◽  
Fluid Properties ◽  
Drilling Operations ◽  
Marsh Funnel

Abstract It is well known that drilling fluid is a key parameter for optimizing drilling operations, cleaning the hole, and managing the rig hydraulics and margins of surge and swab pressures. Although the experimental works present valid and reliable results, they are expensive and time consuming. On the other hand, continuous and regular determination of the rheological mud properties can perform its essential functions during well construction. More uncertainties in planning the drilling fluid properties meant that more challenges may be exposed during drilling operations. This study presents two predictive techniques, multiple regression analysis (MRA) and artificial neural networks (ANNs), to determine the rheological properties of water-based drilling fluid based on other simple measurable properties. While mud density (MW), marsh funnel (MF), and solid% are key input parameters in this study, the output functions or models are plastic viscosity (PV), yield point (YP), apparent viscosity (AV), and gel strength. The prediction methods were demonstrated by means of a field case in eastern Iraq, using datasets from daily drilling reports of two wells in addition to the laboratory measurements. To test the performance ability of the developed models, two error-based metrics (determination coefficient R2 and root mean square error RMSE) have been used in this study. The current results of this study support the evidence that MW, MF, and solid% are consistent indexes for the prediction of rheological properties. Both mud density and solid content have a relative-significant effect on increasing PV, YP, AV, and gel strength. However, a scattering around each fit curve is observed which proved that one rheological property alone is not sufficient to estimate other properties. The results also reveal that both MRA and ANN are conservative in estimating the fluid rheological properties, but ANN is more precise than MRA. Eight empirical mathematical models with high performance capacity have been developed in this study to determine the rheological fluid properties based on simple and quick equipment as mud balance and marsh funnel. This study presents cost-effective models to determine the rheological fluid properties for future well planning in Iraqi oil fields.

The Influence of SiO2 and TiO2 Nanoparticles on the Properties of Water-Based Mud

2017 ◽  
Author(s):  
Petar Mijić ◽  
Nediljka Gaurina-Međimurec ◽  
Borivoje Pašić
Keyword(s):  
Filter Cake ◽  
Drilling Fluid ◽  
Wellbore Stability ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Shale Formations ◽  
Wellbore Instability ◽  
Water Based ◽  
Fluid Properties

About 75% of all formations drilled worldwide are shale formations and 90% of all wellbore instability problems occur in shale formations. This increases the overall cost of drilling. Therefore, drilling through shale formations, which have nanosized pores with nanodarcy permeability still need better solutions since the additives used in the conventional drilling fluids are too large to plug them. One of the solutions to drilling problems can be adjusting drilling fluid properties by adding nanoparticles. Drilling mud with nanoparticles can physically plug nanosized pores in shale formations and thus reduce the shale permeability, which results in reducing the pressure transmission and improving wellbore stability. Furthermore, the drilling fluid with nanoparticles, creates a very thin, low permeability filter cake resulting in the reduction of the filtrate penetration into the shale. This thin filter cake implies high potential for reducing the differential pressure sticking. In addition, borehole problems such as too high drag and torque can be reduced by adding nanoparticles to drilling fluids. This paper presents the results of laboratory examination of the influence of commercially available nanoparticles of SiO2 (dry SiO2 and water-based dispersion of 30 wt% of silica), and TiO2 (water-based dispersion of 40 wt% of titania) in concentrations of 0.5 wt% and 1 wt% on the properties of water-based fluids. Special emphasis is put on the determination of lubricating properties of the water-based drilling fluids. Nanoparticles added to the base mud without any lubricant do not improve its lubricity performance, regardless of their concentrations and type. However, by adding 0.5 wt% SiO2-disp to the base mud with lubricant, its lubricity coefficient is reduced by 4.6%, and by adding 1 wt% TiO2-disp to the base mud with lubricant, its lubricity coefficient is reduced by 14.3%.

scholarly journals Wet Drilled Cuttings Bed Rheology

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1644
Author(s):  
Camilo Pedrosa ◽  
Arild Saasen ◽  
Bjørnar Lund ◽  
Jan David Ytrehus
Keyword(s):  
Drilling Fluid ◽  
Drilling Fluids ◽  
Parallel Plates ◽  
Single Particles ◽  
Cuttings Transport ◽  
Transport Studies ◽  
Water Based ◽  
Fluid Properties ◽  
External Forces ◽  
Cuttings Bed

The cuttings transport efficiency of various drilling fluids has been studied in several approaches. This is an important aspect, since hole cleaning is often a bottleneck in well construction. The studies so far have targeted the drilling fluid cuttings’ transport capability through experiments, simulations or field data. Observed differences in the efficiency due to changes in the drilling fluid properties and compositions have been reported but not always fully understood. In this study, the cuttings bed, wetted with a single drilling fluid, was evaluated. The experiments were performed with parallel plates in an Anton Paar Physica 301 rheometer. The results showed systematic differences in the internal friction behaviors between tests of beds with oil-based and beds with water-based fluids. The observations indicated that cutting beds wetted with a polymeric water-based fluid released clusters of particles when external forces overcame the bonding forces and the beds started to break up. Similarly, it was observed that an oil-based fluid wetted bed allowed particles to break free as single particles. These findings may explain the observed differences in previous cutting transport studies.

Interdisciplinary Approach for Wellbore Stability During Slimhole Drilling at Volga-Urals Basin Oilfield

2021 ◽  
Author(s):  
Anna Vladimirovna Norkina ◽  
Sergey Mihailovich Karpukhin ◽  
Konstantin Urjevich Ruban ◽  
Yuriy Anatoljevich Petrakov ◽  
Alexey Evgenjevich Sobolev
Keyword(s):  
Drilling Fluid ◽  
Interdisciplinary Approach ◽  
Wellbore Stability ◽  
Vertical Wells ◽  
Wellbore Instability ◽  
Water Based ◽  
Chemical Studies ◽  
Fluid Rheology ◽  
Selection Of

Abstract The design features and the need to use a water-based solution make the task of ensuring trouble-free drilling of vertical wells non-trivial. This work is an example of an interdisciplinary approach to the analysis of the mechanisms of instability of the wellbore. Instability can be caused by a complex of reasons, in this case, standard geomechanical calculations are not enough to solve the problem. Engineering calculations and laboratory chemical studies are integrated into the process of geomechanical modeling. The recommendations developed in all three areas are interdependent and inseparable from each other. To achieve good results, it is necessary to comply with a set of measures at the same time. The key tasks of the project were: determination of drilling density, tripping the pipe conditions, parameters of the drilling fluid rheology, selection of a system for the best inhibition of clay swelling.

Full Scale Flow Loop Experiments of Hole Cleaning Performances of Drilling Fluids

2015 ◽  
Author(s):  
Jan David Ytrehus ◽  
Ali Taghipour ◽  
Sneha Sayindla ◽  
Bjørnar Lund ◽  
Benjamin Werner ◽  
...  
Keyword(s):  
Test Section ◽  
Drilling Fluid ◽  
Drilling Fluids ◽  
Flow Loop ◽  
Base Oil ◽  
Hole Cleaning ◽  
Cleaning Performance ◽  
Water Based ◽  
Fluid Properties ◽  
Drilling Cost

One important requirement for a drilling fluid is the ability to transport the cuttings out of the borehole. Improved hole cleaning is a key to solve several challenges in the drilling industry and will allow both longer wells and improved quality of well construction. It has been observed, however, that drilling fluids with similar properties according to the API standard can have significantly different behavior with respect to hole cleaning performance. The reasons for this are not fully understood. This paper presents results from flow loop laboratory tests without and with injected cuttings size particles using a base oil and a commercial oil based drilling fluid. The results demonstrate the importance of the rheological properties of the fluids for the hole cleaning performance. A thorough investigation of the viscoelastic properties of the fluids was performed with a Fann viscometer and a Paar-Physica rheometer, and was used to interpret the results from the flow loop experiments. Improved understanding of the fluid properties relevant to hole cleaning performance will help develop better models of wellbore hydraulics used in planning of well operations. Eventually this may lead to higher ROP with water based drilling fluids as obtained with oil based drilling fluids. This may ease cuttings handling in many operations and thereby significantly reduce the drilling cost using (normally) more environmentally friendly fluids. The experiments have been conducted as part of an industry-sponsored research project where understanding the hole cleaning performance of various oil and water based drilling fluids is the aim. The experiments have been performed under realistic conditions. The flow loop includes a 10 meter long test section with 2″ OD freely rotating drillstring inside a 4″ ID wellbore made of concrete. Sand particles were injected while circulating the drilling fluid through the test section in horizontal position.

Psyllium husk performance in drilling fluid at elevated temperature and pressure conditions

2018 ◽  
Vol 58 (1) ◽  
pp. 112
Author(s):  
Son Ly ◽  
Xiao Yu ◽  
Xinsong Zhang ◽  
Alireza Salmachi
Keyword(s):  
High Performance ◽  
Elevated Temperatures ◽  
Performance Enhancement ◽  
Drilling Fluid ◽  
Filter Press ◽  
Water Soluble ◽  
Natural Polymers ◽  
Psyllium Husk ◽  
Water Based ◽  
Temperature And Pressure

High performance water-based drilling fluid alternatives that meet performance objectives with minimal environmental impact must continually be developed. Drilling fluid performance is dependent on fluid characteristics, and among those most critical are viscosity and filtration. One avenue to improve drilling fluid performance is through enhancement by use of potent, water-soluble natural polymers. Psyllium husk powder is an environmentally friendly natural polymer derived from ground-up surfaces of psyllium seeds (Plantago ovata). When in contact with water, psyllium husk powder forms a gel-like, extraordinarily viscous substance at very low concentrations. It was previously shown that pure psyllium husk is an excellent viscosity and filtration agent for water-based drilling fluid under standard conditions. Psyllium husk can also be used as a clay-extender to enhance viscosity and filtration performance of bentonite mud; however, further laboratory testing of this performance enhancement under elevated temperatures and pressures is required. Extensive laboratory experiments were therefore conducted to test husk performance in bentonite mud under such conditions. An electronic rheometer and a temperature and pressure adjustable API filter press were used to evaluate viscoelastic and filtration mud characteristics respectively. Concentrations of 0.05–0.4% husk with 5% bentonite were tested at 25−120°C under 1500 psi. An optimal husk concentration of 0.1% was determined, increasing bentonite viscosity and yield point by up to 46.9% and 68.1% respectively. Filtrate loss rate and filtration cake thickness were reduced by up to 25.8% and 35.3% respectively. The optimal concentration was useable up to 70°C (~2800 m) before deflocculating was required.

scholarly journals Laponite: a promising nanomaterial to formulate high-performance water-based drilling fluids

2020 ◽  
Author(s):  
Xian-Bin Huang ◽  
Jin-Sheng Sun ◽  
Yi Huang ◽  
Bang-Chuan Yan ◽  
Xiao-Dong Dong ◽  
...  
Keyword(s):  
High Performance ◽  
Drilling Fluid ◽  
Nitrogen Adsorption ◽  
Drill String ◽  
Wellbore Stability ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Mechanism Analysis ◽  
Water Based ◽  
Inhibition Performance

Abstract High-performance water-based drilling fluids (HPWBFs) are essential to wellbore stability in shale gas exploration and development. Laponite is a synthetic hectorite clay composed of disk-shaped nanoparticles. This paper analyzed the application potential of laponite in HPWBFs by evaluating its shale inhibition, plugging and lubrication performances. Shale inhibition performance was studied by linear swelling test and shale recovery test. Plugging performance was analyzed by nitrogen adsorption experiment and scanning electron microscope (SEM) observation. Extreme pressure lubricity test was used to evaluate the lubrication property. Experimental results show that laponite has good shale inhibition property, which is better than commonly used shale inhibitors, such as polyamine and KCl. Laponite can effectively plug shale pores. It considerably decreases the surface area and pore volume of shale, and SEM results show that it can reduce the porosity of shale and form a seamless nanofilm. Laponite is beneficial to increase lubricating property of drilling fluid by enhancing the drill pipes/wellbore interface smoothness and isolating the direct contact between wellbore and drill string. Besides, laponite can reduce the fluid loss volume. According to mechanism analysis, the good performance of laponite nanoparticles is mainly attributed to the disk-like nanostructure and the charged surfaces.

Sign in / Sign up

Export Citation Format

Share Document