Preparation and Properties of Corn Stalk Cellulose Microcrystal Reinforced Poly(Vinyl Alcohol) Composite Film

2012 ◽  
Vol 487 ◽  
pp. 781-784
Author(s):  
Chun Guang Li ◽  
Chun Li Li ◽  
Jie Hu Cui ◽  
Lei Liu ◽  
Rui Zhang
Keyword(s):  
Thermal Properties ◽  
Composite Film ◽  
Tensile Properties ◽  
Microcrystalline Cellulose ◽  
Vinyl Alcohol ◽  
Composite Films ◽  
Poly Vinyl Alcohol ◽  
Corn Stalk ◽  
Biodegradable Composite ◽  
Cellulose Microcrystal

The biodegradable composite films were prepared from corn stalk microcrystalline cellulose as filler and poly(vinyl alcohol)(PVA) as polymeric matrix. The crystallinity, the tensile properties and the thermal properties of the composites were tested. Corn stalk microcrystalline cellulose was distributed in PVA films as the crystalline state. The results show that the tensile properties and thermal properties were improved with the addition of corn stalk microcrystalline cellulose. When corn stalk microcrystalline cellulose mass fraction was 10%, both temperature of initial decomposition and maximum weight loss rate of composite film were raised by 19.25°C and 17.17°C, and the tensile strength increased by 37.91%, and the elongation at break increased by 58.93% compared to those of pure PVA.

Preparation and Properties of Bagasses Cellulose Microcrystal Reinforced Poly(Vinyl alcohol) Composite Film

2011 ◽  
Vol 399-401 ◽  
pp. 381-384
Author(s):  
Chun Guang Li ◽  
Bin Guo Zheng ◽  
Wei Gong Peng ◽  
Wei Tian ◽  
Rui Zhang
Keyword(s):  
Thermal Properties ◽  
Composite Film ◽  
Tensile Properties ◽  
Microcrystalline Cellulose ◽  
Vinyl Alcohol ◽  
Composite Films ◽  
Poly Vinyl Alcohol ◽  
Elongation At Break ◽  
Biodegradable Composite ◽  
Cellulose Microcrystal

The biodegradable composite films were prepared from bagasse microcrystalline cellulose as filler and poly(vinyl alcohol)(PVA) as polymeric matrix. The crystallinity, the tensile properties and the thermal properties of the composites were tested. Bagasse microcrystalline cellulose was distributed in PVA films as the crystalline state. The results show that the tensile properties and thermal properties were improved with the addition of bagasse microcrystalline cellulose. When bagasse microcrystalline cellulose mass fraction was 5%, both temperature of initial decomposition and maximum weight loss rate of composite film were raised by 11.71°C and 36.86°C, and the tensile strength increased by 17.88%, and the elongation at break increased by 36.62% compared to those of pure PVA.

Thermal and Mechanical Properties of Corn Stalk Microcrystalline Cellulose Reinforced PLA Composites

2011 ◽  
Vol 233-235 ◽  
pp. 1726-1729
Author(s):  
Chun Guang Li ◽  
Rui Zhang ◽  
Yun Xia Li ◽  
Peng Fei Xu ◽  
Yan Qiu Wang
Keyword(s):  
Thermal Properties ◽  
Tensile Properties ◽  
Microcrystalline Cellulose ◽  
Composite Films ◽  
Decomposition Temperature ◽  
Corn Stalk ◽  
Thermal And Mechanical Properties ◽  
Initial Decomposition Temperature ◽  
Elongation At Break ◽  
Biodegradable Composite

The biodegradable composite films were prepared from corn stalk microcrystalline cellulose as filler and polylactic acid (PLA) as polymeric matrix. The crystallinity, the tensile properties and the thermal properties of the composites were tested. The results show that the tensile properties and thermal properties were improved with the addition of corn stalk microcrystalline cellulose. When corn stalk microcrystalline cellulose account for 10% of the PLA quality, the initial decomposition temperature was raised by 34.38, tensile strength increased by 58.3% and elongation at break increased by 31.1% compared to those of pure PLA.

The Effect of Corn Stalk Microcrystalline Cellulose on Thermal and Mechanical Properties of Chitosan Composites

2012 ◽  
Vol 174-177 ◽  
pp. 1038-1041 ◽  
Author(s):  
Chun Guang Li ◽  
Xiang Ping Wang ◽  
Lei Liu ◽  
Jie Hu Cui ◽  
Rui Zhang
Keyword(s):  
Thermal Properties ◽  
Tensile Properties ◽  
Microcrystalline Cellulose ◽  
Loss Rate ◽  
Composite Films ◽  
Corn Stalk ◽  
Weight Loss Rate ◽  
Elongation At Break ◽  
Biodegradable Composite ◽  
Maximum Weight Loss

The biodegradable composite films were prepared from corn stalk microcrystalline cellulose as filler and chitosan as polymeric matrix. The crystallinity, the tensile properties and the thermal properties of the composites were tested. The results show that the tensile properties and thermal properties were improved with the addition of corn stalk microcrystalline cellulose. When corn stalk microcrystalline cellulose account for 10% of the chitosan quality, the initial decomposition and maximum weight loss rate temperature was raised by 13.19°C and 38.84°C, tensile strength increased by 83.55% and elongation at break increased by 77.38% compared to those of pure chitosan

Thermal and Mechanical Properties of Bagasse Microcrystalline Cellulose Reinforced PLA Composites

2011 ◽  
Vol 284-286 ◽  
pp. 1786-1789
Author(s):  
Chun Guang Li ◽  
Wei Gong Peng ◽  
Yun Xia Li ◽  
Peng Fei Xu ◽  
Wei Tian ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Tensile Properties ◽  
Microcrystalline Cellulose ◽  
Mass Fraction ◽  
Composite Films ◽  
Decomposition Temperature ◽  
Thermal And Mechanical Properties ◽  
Initial Decomposition Temperature ◽  
Elongation At Break ◽  
Biodegradable Composite

The biodegradable composite films were prepared from bagasse microcrystalline cellulose as filler and polylactic acid (PLA) as polymeric matrix. The crystallinity, the tensile properties and the thermal properties of the composites were tested. The results show that the tensile properties and thermal properties were improved with the addition of bagasse microcrystalline cellulose. When bagasse microcrystalline cellulose mass fraction was 5%, the initial decomposition temperature was raised by 30.73°C, and the tensile strength increased by 50.98%, and the elongation at break increased by 16.25% compared to those of pure PLA.

scholarly journals Incorporating MXene into Boron Nitride/Poly(Vinyl Alcohol) Composite Films to Enhance Thermal and Mechanical Properties

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 379
Author(s):  
Seonmin Lee ◽  
Jooheon Kim
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Boron Nitride ◽  
Composite Film ◽  
Vinyl Alcohol ◽  
Composite Films ◽  
Poly Vinyl Alcohol ◽  
Thermal And Mechanical Properties ◽  
Conduction Path ◽  
Thermally Conductive

Aggregated boron nitride (ABN) is advantageous for increasing the packing and thermal conductivity of the matrix in composite materials, but can deteriorate the mechanical properties by breaking during processing. In addition, there are few studies on the use of Ti3C2 MXene as thermally conductive fillers. Herein, the development of a novel composite film is described. It incorporates MXene and ABN into poly(vinyl alcohol) (PVA) to achieve a high thermal conductivity. Polysilazane (PSZ)-coated ABN formed a heat conduction path in the composite film, and MXene supported it to further improve the thermal conductivity. The prepared polymer composite film is shown to provide through-plane and in-plane thermal conductivities of 1.51 and 4.28 W/mK at total filler contents of 44 wt.%. The composite film is also shown to exhibit a tensile strength of 11.96 MPa, which is much greater than that without MXene. Thus, it demonstrates that incorporating MXene as a thermally conductive filler can enhance the thermal and mechanical properties of composite films.

scholarly journals Physico-Mechanical and Thermal Properties of Thermoplastic Poly(Vinyl Alcohol) Modified Thermosetting Urea Formaldehyde Resin

2021 ◽  
Vol 21 (4) ◽  
pp. 53-66
Author(s):  
Shahin Sultana ◽  
Mehedi Mannan ◽  
Md. Jaynal Abedin ◽  
Zahidul Islam ◽  
Husna Parvin Nur ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Tensile Properties ◽  
Vinyl Alcohol ◽  
Urea Formaldehyde ◽  
Forest Products ◽  
Urea Formaldehyde Resin ◽  
Poly Vinyl Alcohol ◽  
Formaldehyde Resin ◽  
Mechanical And Thermal Properties ◽  
Uf Resin

Abstract Urea formaldehyde (UF) resins are brittle and to improve their tensile properties poly(vinyl alcohol) (PVA) has been used to modify the UF resin. An easy improved procedure was developed to make PVA modified UF resin on the basis of conventional synthesis of UF resin. Prepolymer of UF was mixed with different weight percentages of PVA (1-5%) to synthesize modified UF resin which can be used to make adhesive for forest products. Both UF and modified UF resins were characterized by FTIR, physico-mechanical and thermal properties analyses. Modified UF resin containing 2 wt. % PVA exhibited better results than the UF.

Sign in / Sign up

Export Citation Format

Share Document