Research on Mesh Optimization of the Finite Element Calculation about Three-Dimensional Foundation Pit

2012 ◽  
Vol 487 ◽  
pp. 855-859
Author(s):  
Shi Lun Feng ◽  
Yu Ming Zhou ◽  
Pu Lin Li ◽  
Jun Li ◽  
Zhi Yong Li ◽  
...  
Keyword(s):  
Finite Element ◽  
Complex Geometry ◽  
Three Dimensional ◽  
Mesh Optimization ◽  
Design Calculation ◽  
Foundation Pit ◽  
3D Design ◽  
Finite Element Software ◽  
Core Language ◽  
Grid Division

Abaqus finite element software can implement three-dimensional excavation design calculation, so authors used Python of Abaqus core language made the 3D design of foundation pit supporting program come ture and also did intensive study of mesh optimization during the process. Authors also did intensive comparison and analysis about grid division of the complex geometry foundation pit, through a regularization partion about a variety of special-shaped pit, we made the automatic division about the structural grid of all kinds of shapes foundation pit successful. On this basis, we achieved better calculation effects of the model. The article will introduce problems about optimization of grid in procedure.

The Research on the Influence of the Forms of Foundation on the Behavior of Adjacent Excavation Based on Building Materials

2013 ◽  
Vol 788 ◽  
pp. 606-610
Author(s):  
Qing Xiang Ji ◽  
Xin Sheng Ge
Keyword(s):  
Finite Element ◽  
Large Scale ◽  
Building Materials ◽  
Three Dimensional ◽  
Element Model ◽  
Deep Excavation ◽  
Foundation Pit ◽  
Finite Element Software ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

Foundation pit excavation could be affected to some extent by surrounding different kinds of building materials, building structure, foundation form and load distribution, especially in intensive buildings. In this paper, based on the large-scale finite element software ANSYS, a three-dimensional finite element model is established to analyze the consequences of these complex and uncertain factors faced with by deep excavation projects and the conclusions of the excavation affected by different foundations form of adjacent buildings are arrived at.

Analysis and Research about the Influences of the Foundation Pit on the Nearby Water Pipe Bridge

2013 ◽  
Vol 838-841 ◽  
pp. 1155-1158
Author(s):  
We Nang Hou ◽  
Fei Ying Liu
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Three Dimensional ◽  
Water Pipe ◽  
Foundation Pit ◽  
Finite Element Software ◽  
Box Culverts ◽  
Design And Construction

There is a foundation pit of box culverts adjacent to the water pipe bridge of the Dam River in Shenzhen. This text uses large finite element software MIDAS/GTS to do the three-dimensional numerical simulation of pile-earth-supporting anchor, and analyzes the influences on the pipe bridge during the evacuation of the foundation pit with box culverts. This text is on the purpose of providing suggestion for the design and construction of the foundation pit.

Method for Getting the Soil Elastic Modulus in the Finite Element Analysis of the Deep Foundation Excavation in Tianjin

2012 ◽  
Vol 170-173 ◽  
pp. 386-389
Author(s):  
Shi Lun Feng ◽  
Pu Lin Li ◽  
Jun Li ◽  
Yuming Zhou
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Elastic Modulus ◽  
Three Dimensional ◽  
Soil Parameters ◽  
Deep Foundation ◽  
Foundation Pit ◽  
Element Analysis ◽  
Finite Element Software ◽  
Deep Foundation Excavation

The finite element method has been used widely in foundation pit engineering to simulate the deep foundation excavation, but it is troublesome and time-consuming to get the important calculation parameter of the soil elastic modulus. So a method based on the comon soil parameters is proposed to get the soil elastic modulus. And a real foundation excavation was simulated using the finite element software ABAQUS and the soil elastic modulus got according to the proposed method. The three-dimensional finite element analysis results were compared to the field data, and both results were close to each other.

Numerical solutions for strain-softening surrounding rock under three-dimensional principal stress condition

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Sheng Yu-ming ◽  
Li Chao ◽  
Xia Ming-yao ◽  
Zou Jin-feng
Keyword(s):  
Finite Element ◽  
Principal Stress ◽  
Stress Condition ◽  
Strain Softening ◽  
Numerical Solutions ◽  
Three Dimensional ◽  
Strength Criterion ◽  
Surrounding Rock ◽  
Flow Rule ◽  
Finite Element Software

Abstract In this study, elastoplastic model for the surrounding rock of axisymmetric circular tunnel is investigated under three-dimensional (3D) principal stress states. Novel numerical solutions for strain-softening surrounding rock were first proposed based on the modified 3D Hoek–Brown criterion and the associated flow rule. Under a 3D axisymmetric coordinate system, the distributions for stresses and displacement can be effectively determined on the basis of the redeveloped stress increment approach. The modified 3D Hoek–Brown strength criterion is also embedded into finite element software to characterize the yielding state of surrounding rock based on the modified yield surface and stress renewal algorithm. The Euler implicit constitutive integral algorithm and the consistent tangent stiffness matrix are reconstructed in terms of the 3D Hoek–Brown strength criterion. Therefore, the numerical solutions and finite element method (FEM) models for the deep buried tunnel under 3D principal stress condition are presented, so that the stability analysis of surrounding rock can be conducted in a direct and convenient way. The reliability of the proposed solutions was verified by comparison of the principal stresses obtained by the developed numerical approach and FEM model. From a practical point of view, the proposed approach can also be applied for the determination of ground response curve of the tunnel, which shows a satisfying accuracy compared with the measuring data.

Modeling of Thermoplastic Materials for the Process-Simulation of Press-Fit Interconnections on Moulded Interconnected Devices

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Thomas Fellner ◽  
Elena Zukowski ◽  
Jürgen Wilde ◽  
H. Kück ◽  
H. Richter ◽  
...  
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Base Material ◽  
Creep Model ◽  
Assembly Process ◽  
Temperature Dependent ◽  
Reliability Modeling ◽  
Finite Element Software ◽  
Press Fit ◽  
Temperature Loads

This investigation is aimed at the modeling of both the fabrication process and the reliability of press-fit interconnections on moulded interconnect devices (MID). These are multifunctional three-dimensional substrates, produced by thermoplastic injection moulding for large-series applications. The assembly process and subsequently the durability of press-fit interconnections has been modeled and proved with a finite element software. Especially, a simulation tool for process optimizations was created and applied. In order to obtain realistic results, a creep model for the investigated base material, a liquid-crystal polymer (LCP), was generated and verified by experiments. Required friction coefficients between metal pin and base material were determined by adapting simulations and experiments. Retention forces of pins pressed into substrate holes during as well after the assembly process, and after temperature loads were predicted by simulations. Additionally, the decreasing extraction forces over time due to creep in the thermoplastic base material have been predicted for different storage temperatures as well with finite element analyses. Following, the numerical results of the process and reliability modeling were verified by experiments. It is concluded that the behavior of the mechanical contact of the pin-substrate system, can be suitably described time- and temperature-dependent.

A Coupled SBFEM-FEM Approach for Evaluating Stress Intensity Factors

2013 ◽  
Vol 353-356 ◽  
pp. 3369-3377 ◽  
Author(s):  
Ming Guang Shi ◽  
Chong Ming Song ◽  
Hong Zhong ◽  
Yan Jie Xu ◽  
Chu Han Zhang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Stress Intensity ◽  
Stress Intensity Factors ◽  
Complex Geometry ◽  
Stress Singularity ◽  
Intensity Factors ◽  
Finite Element Software ◽  
Scaled Boundary Finite Element ◽  
Element Method

A coupled method between the Scaled Boundary Finite Element Method (SBFEM) and Finite Element Method (FEM) for evaluating the Stress Intensity Factors (SIFs) is presented and achieved on the platform of the commercial finite element software ABAQUS by using Python as the programming language. Automatic transformation of the finite elements around a singular point to a scaled boundary finite element subdomain is realized. This method combines the high accuracy of the SBFEM in computing the SIFs with the ability to handle material nonlinearity as well as powerful mesh generation and post processing ability of commercial FEM software. The validity and accuracy of the method is verified by analysis of several benchmark problems. The coupled algorithm shows a good converging performance, and with minimum additional treatment can be able to handle more problems that cannot be solved by either SBFEM or FEM itself. For fracture problems, it proposes an efficient way to represent stress singularity for problems with complex geometry, loading condition or certain nonlinearity.

Effect of Pile-Soil-Structure Interaction on the Cable-Stayed Bridge in Response to the Earthquake

2014 ◽  
Vol 539 ◽  
pp. 731-735 ◽  
Author(s):  
Yu Chen
Keyword(s):  
Finite Element ◽  
Seismic Response ◽  
Soil Structure ◽  
Response Spectrum ◽  
Three Dimensional ◽  
Soil Structure Interaction ◽  
Structure Interaction ◽  
Finite Element Software ◽  
Cable Stayed Bridge ◽  
Three Dimensional Finite Element

In this thesis, based on the design of a 140+90m span unusual single tower and single cable plane cable-stayed bridge, free vibration characteristics and seismic response are investigated; three dimensional finite element models of a single tower cable-stayed bridge with and without the pile-soil-structure interaction are established respectively by utilizing finite element software MIDAS/CIVIL, seismic response of Response spectrum and Earthquake schedule are analyzed respectively and compared. By the comparison of the data analysis, for small stiffness span cable-stayed bridge, the pile-soil-structure interaction can not be ignored with calculation and analysis of seismic response.

Finite Element Analysis of the Effect of Surface Hardening Depth in Port Crane Wheel

2011 ◽  
Vol 291-294 ◽  
pp. 3282-3286 ◽  
Author(s):  
Jiang Wei Wu ◽  
Peng Wang
Keyword(s):  
Finite Element ◽  
Surface Hardening ◽  
Three Dimensional ◽  
Element Model ◽  
Contact Stresses ◽  
Numerical Results ◽  
Element Analysis ◽  
Finite Element Software ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

In port crane industry, the surface hardening technique is widely used in order to improve the strength of wheel. But the hardening depth is chosen only by according to the experience, and the effect of different hardened depths is not studied theoretically. In this paper, the contact stresses in wheel with different hardening depth have been analyzed by applying three-dimensional finite element model. Based on this model, the ANSYS10.0 finite element software is used. The elastic wheel is used to verify the numerical results with the Hertz’s theory. Three different hardening depths, namely 10mm, 25mm and whole hardened wheel, under three different vertical loads were applied. The effect of hardening depth of a surface hardened wheel is discussed by comparing the contact stresses and contact areas from the numerical results.

Non-Linear Three-Dimensional Finite Element Analysis of Some Extremely Deep Foundation Pit Support

2013 ◽  
Vol 443 ◽  
pp. 79-83
Author(s):  
Zhen Xi Yu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Simulation Analysis ◽  
Three Dimensional ◽  
Deep Foundation ◽  
Foundation Pit ◽  
Element Analysis ◽  
Deep Foundation Pit ◽  
Three Dimensional Finite Element ◽  
Support Engineering

In recent years, with the enhancement of overall national strength in China, the computer simulation technology has been developed rapidly and widely applied to engineering construction. Particularly, investment proportion of the technology in deep foundation pit engineering is immense. Yet affected by national conditions in China, the construction and application of deep foundation pit engineering have many extensive factors. It also results in insufficient vigor of finite element analysis of deep foundation pit support construction. In this way, construction problems arise frequently under the condition that there exist buildings around. With some deep foundation pit support engineering, the thesis conducts simulation analysis of the engineering through the technology of nonlinear three-dimensional finite element.Project profile

Sign in / Sign up

Export Citation Format

Share Document