Characterization of PM2.5- and PM10-Bound Polycyclic Aromatic Hydrocarbons in Urban and Rural Areas in Beijing during the Winter

2012 ◽  
Vol 518-523 ◽  
pp. 1479-1491 ◽  
Author(s):  
Xue Ling Dong ◽  
Da Meng Liu ◽  
Shao Peng Gao

Polycyclic aromatic hydrocarbons (PAHs) were here investigated in airborne particulate matter (PM2.5 and PM10) samples collected in urban (including residential, commercial, industrial, and traffic zones) and rural areas in and around Beijing from December 2005 to January 2006. Sixteen polycyclic aromatic hydrocarbons adsorbed onto fine- (PM2.5) and coarse- (PM10) grained samples were analyzed by gas chromatography-mass spectrometry (GC-MS). The mean total PAH concentrations were 30.1 and 80.1 ng/m3 in PM2.5, and 44.1 and 99.8 ng/m3 in PM10 in urban and rural areas, respectively. PAHs were mostly adsorbed on small inhalable particles (>50%) with four to six rings, which dominated both fractions. Strong correlations between PM-associated extractable organic matter (EOM) and particulate PAHs were found, especially in PM2.5, indicating that PM-PAHs concentrations were strongly influenced by PM-associated EOM. Of the different functional areas studied, the total PAH concentrations in both fractions were highest in industrial and rural areas and lowest in traffic zones. This may have been the result of the different emission sources and more efficient energy structures that occur during the winter. Distribution profiles and diagnostic ratios revealed that coal combustion was the major source of PM2.5- and PM10- associated PAHs. Additional sources of PAHs may include vehicle emissions, natural gas combustion and wood burning. BaP-based toxic equivalence factor (BaPeq), BaP-equivalent carcinogenic power (BaPE) and a sum of five carcinogenic PAHs showed that the industrial and rural areas were the most vulnerable to PAHs.

2021 ◽  
Author(s):  
Anne Corminboeuf ◽  
Jean-Carlos Montero-Serrano ◽  
Richard St-Louis

<p>The concentrations of 23 polycyclic aromatic hydrocarbons (PAHs; 16 parent and 7 alkylated PAHs) in 113 surface marine sediment samples, 13 on-land sediment samples and 8 subsampled push cores retrieved from the Canadian Arctic Archipelago (CAA) were calculated. PAHs were extracted via accelerated solvent extraction (ASE) and quantified via gas chromatography-mass spectrometry (GC-MS). The sums of the concentrations 16 PAHs in the surface sediments ranged from 7.8 to 247.7 ng g<sup>-1</sup> (dry weight [dw]) basis). The PAH inputs to the sediments have remained constant during the last century and agree with the results obtained for the surface sediments. Diagnostic ratios indicated that the PAHs in the CAA mainly originate from natural petrogenic sources, with some pyrogenic sources. Temporal trends did not indicate major source shifts and largely indicated petrogenic inputs. Overall, the sediments retrieved from the CAA have low PAH concentrations that are mainly natural.</p>


2014 ◽  
Vol 13 (9) ◽  
pp. 2311-2315 ◽  
Author(s):  
Simona Dobrinas ◽  
Alina Soceanu ◽  
Gabriela Stanciu ◽  
Viorica Popescu

2021 ◽  
Author(s):  
Anne Corminboeuf ◽  
Jean-Carlos Montero-Serrano ◽  
Richard St-Louis

<p>The concentrations of 23 polycyclic aromatic hydrocarbons (PAHs; 16 parent and 7 alkylated PAHs) in 113 surface marine sediment samples, 13 on-land sediment samples and 8 subsampled push cores retrieved from the Canadian Arctic Archipelago (CAA) were calculated. PAHs were extracted via accelerated solvent extraction (ASE) and quantified via gas chromatography-mass spectrometry (GC-MS). The sums of the concentrations 16 PAHs in the surface sediments ranged from 7.8 to 247.7 ng g<sup>-1</sup> (dry weight [dw]) basis). The PAH inputs to the sediments have remained constant during the last century and agree with the results obtained for the surface sediments. Diagnostic ratios indicated that the PAHs in the CAA mainly originate from natural petrogenic sources, with some pyrogenic sources. Temporal trends did not indicate major source shifts and largely indicated petrogenic inputs. Overall, the sediments retrieved from the CAA have low PAH concentrations that are mainly natural.</p>


2021 ◽  
Author(s):  
Mohsen Soleimani ◽  
Zohreh Ebrahimi ◽  
Nourollah Mirghaffari ◽  
Hossein Moradi ◽  
Nasibeh Amini ◽  
...  

Abstract Particulate matters (PMs) and their associated chemical compounds such as polycyclic aromatic hydrocarbons (PAHs) are important factors to evaluate air pollution and its health impacts particularly in developing countries. Source identification of these compounds can be used for air quality management. The aim of this study was to identify the sources of PM2.5-bound PAHs in Isfahan city, a metropolitan and industrialized area in central Iran. The PM2.5 samples were collected at 50 sites during one year. Source identification and apportionment of PAHs were carried out using diagnostic ratios (DRs) of PAHs and positive matrix factorization (PMF) model. The results showed that the concentrations of PM2.5 ranged from 8 to 291 µg/m3 with an average of 60.2 ± 53.9 µg/m3 whereas the sum of concentrations of the 19 PAH compounds (ƩPAHs) ranged from 0.3 to 61.4 ng/m3 with an average of 4.65 ± 8.54 ng/m3. The PAH compounds showed their highest and lowest concentrations in fall and summer, respectively. Applying DRs, suggested that the source of the PAHs were mainly from fuel combustion. The main sources identified by the PMF model were gasoline combustion (28 %) followed by diesel combustion (22 %), natural gas combustion (17 %), evaporative-uncombusted (13 %), industrial activities (11 %), and unknown sources (9 %). The results revealed that in addition to transportation and industrial activities, combustion of natural gas for heating systems as one of the PAHs source in PM2.5 should be managed in the metropolitan area.


2013 ◽  
Vol 12 (1) ◽  
pp. 63-70

<p>About 140 samplings of fine and coarse particles were gathered during the year 2006 in Kozani that represent an urban area surrounded by opencast coal mining. A low volume dichotomus sampler has been used to trap suspended particles. The filters used were teflon, which are ideal for analysis in the determination of PAHs. The determination of Polycyclic Aromatic Hydrocarbons (PAHs) has been carried out by the use of the analytic technique of large volume injection and gas chromatography – mass spectrometry (LVI - GC/MS). The extraction of substances has been made in a two stage procedure, firstly with agitation in a magnetic shaker and secondly by the use of ultrasonic bath. This technique has given high recoveries of PAHs, in short time intervals. The mean daily concentrations of fine particles varied from 4 to 48 μg m-3 and annual mean was 16 μg m-3. The mean daily concentrations of coarse particles respectively varied from 2 to 67 μg m-3 with 23 μg m-3 annual mean concentration. The ΣPAH concentrations for fine samples were 4.80 ± 7.06 ng m-3 and for coarse samples were 1.36 ± 1.59 ng m-3. The mean B[a]Py concentration for fine particles was 0.38 ng m-3. Finally, diagnostic ratios were used to characterize and identify PAHs emission source in this study.</p>


2018 ◽  
Vol 41 (2) ◽  
pp. 507-528 ◽  
Author(s):  
Matar Thiombane ◽  
Stefano Albanese ◽  
Marcello Di Bonito ◽  
Annamaria Lima ◽  
Daniela Zuzolo ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document