Experimental Research on the Iron Separation from an Ultra Poor Iron Ore

2012 ◽  
Vol 535-537 ◽  
pp. 746-749
Author(s):  
Wei Zhi Wang ◽  
Li Ping Chen ◽  
Chun Guang Yang
Keyword(s):  
Magnetic Separation ◽  
Iron Ore ◽  
Low Grade ◽  
Iron Recovery ◽  
Magnetic Separator ◽  
Iron Concentrate ◽  
Second Stage ◽  
Low Intensity ◽  
Two Stages ◽  
Titanium Magnetite

Test was made on separating iron from a ultra-low-grade vanadium titanium magnetite ore by a process of tailing discarding at a coarser size，staged grinding and staged low intensity magnetic separation. The results show that when the raw ore is treated by permanent dry magnetic separator with low intensity magnetic separation at 12～0 mm size，qualified tailings of about 20% yield can be discarded．The coarse concentrate is grounded in two stages. With the first stage grinding size being 45% -200 mesh and the second stage，75% -200 mesh，and then treated by two stage low intensity magnetic separation．As a result，an iron concentrate with a TFe grade of 65.80%and an iron recovery of 47.74%can be achieved．

Beneficiation Process Optimization Study on a Low-Grade Hematite Ore

2013 ◽  
Vol 303-306 ◽  
pp. 2461-2464
Author(s):  
Wei Zhi Wang ◽  
Qing Mei Jia ◽  
Chun Guang Yang
Keyword(s):  
Process Optimization ◽  
High Intensity ◽  
Iron Ore ◽  
Low Grade ◽  
Iron Recovery ◽  
Magnetic Separator ◽  
Iron Concentrate ◽  
Second Stage ◽  
Optimization Study ◽  
Hematite Ore

A hematite has low grade, fine disseminated size andcomplex disseminated relations, which are refractory iron ore. Using SLon pulsating high gradient magnetic separator, induction intensity 8500Oe, pulsating 20mm stroke, stroke of 120 beats / min), a crude iron ore concentrates a grade of 35.93.%, the recovery rate of 82.39% is obtained through high intensity magnetic separation.( The final iron concentrate with TFe grade of 64.83%,yield of 14.55% and iron recovery of 35.74% from the raw ores with TFe grade of 26.29％ was obtained, with the first stage grinding size being 50% -0.074mm and the second stage,95% -0.074mm.

Experimental Research on Comprehensive Recovery of Iron and Phosphorus from the Low Grade Vanadium-Titanium Magnetite Ore

2012 ◽  
Vol 549 ◽  
pp. 478-481 ◽  
Author(s):  
Wei Zhi Wang ◽  
Li Ping Chen ◽  
Chun Guang Yang
Keyword(s):  
Experimental Research ◽  
Mineral Resources ◽  
Low Grade ◽  
Iron Recovery ◽  
Iron Concentrate ◽  
Low Intensity ◽  
Magnetite Ore ◽  
Vanadium Titanium ◽  
Comprehensive Recovery ◽  
Titanium Magnetite

An experimental research on comprehensive recovery of iron and associated apatite from a low grade vanadiferous titanomagnetite ore with high phosphorus was carried out. The results showed that using the technological flowsheet of “low -intensity magnetic separation-flotation”, not only the magnetite can be effectively separated, but the associated apatite in the mineral resources can also be satisfactorily recovered. An iron concentrate with a TFe grade of 64.81% and iron recovery of 58.04% and a high-quality phosphorus concentrate of 33.50% P2O5 with a yield of 92.18% is obtained．

A Combined Beneficiation Process to Recover Iron Minerals from a Finely Disseminated Low-Grade Iron Ore

2013 ◽  
Vol 634-638 ◽  
pp. 3273-3276
Author(s):  
Si Qing Liu ◽  
Min Zhang ◽  
Wan Ping Wang ◽  
Xiu Juan Li
Keyword(s):  
Magnetic Separation ◽  
Iron Ore ◽  
Shaking Table ◽  
Low Grade ◽  
Gravity Concentration ◽  
Iron Minerals ◽  
Iron Concentrate ◽  
Low Intensity ◽  
Mineralogical Study ◽  
Basic Facts

In this research, a refractory iron ore is processed, according to the basic facts of mineralogical study. Mineralogy shows that the ore is characterized by the finely disseminated iron minerals with a small amount in the ore. Iron minerals in the ore are mainly hematite and magnetite. On the basis of the ore characteristic, a flowsheet of "stage grinding-low intensity magnetic separation-high intensity magnetic separation-gravity concentration by fine shaking table" was developed. An iron concentrate assaying 51.45% Fe at a recovery of 62.12% was obtained when the raw ore contains 18.61% Fe.

Beneficiation of a Low Grade Titanomagnetite Ore in Mining Engineering

2012 ◽  
Vol 577 ◽  
pp. 187-190
Author(s):  
Si Qing Liu ◽  
Wan Ping Wang ◽  
Jian Yang ◽  
Jia Gui You
Keyword(s):  
Low Grade ◽  
Mining Engineering ◽  
Magnetic Intensity ◽  
Magnetic Separator ◽  
Iron Minerals ◽  
Iron Concentrate ◽  
Low Intensity ◽  
Two Stages

Beneficiation of a low-grade titanomagnetite ore containing 18.52%Fe and 6.65%TiO2 was conducted by dry and wet low intensity magnetic separators. Effects of different variables, such as magnetic intensity, grinding fineness and stages of separation, were investigated in details. The ore was firstly preconcentrated by a dry low-intensity magnetic separator (DLMS) at a magnetic intensity of 2500Oe, and then ground to -0.074mm 53%, followed by a wet low-intensity magnetic separator (WLMS) to recover iron minerals. An iron concentrate assaying 49.22% Fe can be obtained at a recovery of 46.23%. The concentrate was further ground to -0.074mm 70%, followed by two stages of WLMS, and a marketable iron concentrate assaying 56.24% Fe and 9.44% TiO2 can be obtained at the recovery of 42.89% and 20.69%, separately. Tailings assaying 6.48% TiO2 with a recovery of 79.31% is subject to be further recovered.

Experimental Study on the Mineral Processing of a High-Clay and Lean Hematite

2012 ◽  
Vol 550-553 ◽  
pp. 2831-2834
Author(s):  
Wei Zhi Wang ◽  
Qing Mei Jia ◽  
Chun Guang Yang
Keyword(s):  
Experimental Study ◽  
Magnetic Separation ◽  
Experimental Research ◽  
High Intensity ◽  
Mineral Processing ◽  
Shaking Table ◽  
Iron Recovery ◽  
Iron Concentrate ◽  
Second Stage ◽  
Low Intensity

The mineral processing experimental research was carried out on a high mud content lean hematite. The results showed that using the technological flowsheet of “stage grinding- low intensity magnetic separation for obtaining concentrate - high-intensity magnetic separation for discarding tailings-gravity separation(shaking table)”,a final iron concentrate with TFe grade of 65.89% ,yield of 19.35% and iron recovery of 52.32% from the raw ores with TFe grade of 24.07％ was obtained, with the first stage grinding size being 50% -200 mesh and the second stage,95% -200 mesh.

Experimental Research on Comprehensive Recovery of Iron and Titanium from the Vanadium-Titanium Magnetite Ore

2013 ◽  
Vol 641-642 ◽  
pp. 381-384 ◽  
Author(s):  
Wei Zhi Wang ◽  
Qing Lei Meng ◽  
Chun Guang Yang
Keyword(s):  
Experimental Research ◽  
Mineral Resources ◽  
Low Grade ◽  
Iron Recovery ◽  
Iron Concentrate ◽  
Low Intensity ◽  
Magnetite Ore ◽  
Vanadium Titanium ◽  
Comprehensive Recovery ◽  
Titanium Magnetite

An experimental research on comprehensive recovery of iron and associated apatite from a low grade vanadiferous titanomagnetite ore with high phosphorus was carried out. The results showed that using the technological flowsheet of “low -intensity magnetic separation-flotation”, not only the magnetite can be effectively separated, but the associated apatite in the mineral resources can also be satisfactorily recovered. An iron concentrate with a TFe grade of 64.81% and iron recovery of 58.04% and a high-quality phosphorus concentrate of 33.50% P2O5 with a yield of 92.18% is obtained．

Mineral Processing Technology Study on a Lean Hematite Ore with Finely-Disseminated Minerals

2013 ◽  
Vol 303-306 ◽  
pp. 2473-2476
Author(s):  
Wei Zhi Wang ◽  
Li Hui Zhou ◽  
Chun Guang Yang
Keyword(s):  
Mineral Processing ◽  
Low Grade ◽  
Iron Recovery ◽  
Technology Study ◽  
Complex Composition ◽  
Flotation Process ◽  
Iron Concentrate ◽  
Second Stage ◽  
Fine Grain ◽  
Hematite Ore

The mineral processing experimental research was carried out on the hematite bearing characteristics of low grade, fine grain,complex composition. The results showed that using the technological flowsheet of “stage grinding- low intensity magnetic separation”, the iron concentrate with recovery of 36.56% and grade of 65.85% Fe can be obtained. And the iron concentrate with recovery of 17.23% and grade of 63.53% Fe can be obtained by “stage grinding-HIMS process-reverse flotation” process. The final iron concentrate with TFe grade of 65.10%,yield of 19.19% and total iron recovery of 53.79% from the raw ores with TFe grade of 23.41％ was obtained, with the first stage grinding size being 55% -0.074mm and the second stage,93% -0.074mm.

Experimental Research on Low Grade Copper-Bearing Magnetite in one Area

2011 ◽  
Vol 347-353 ◽  
pp. 157-162
Author(s):  
Jun Liu ◽  
Jiang An Chen
Keyword(s):  
Magnetic Separation ◽  
Experimental Research ◽  
Low Grade ◽  
Research Subjects ◽  
Flotation Process ◽  
Valuable Metal ◽  
Comprehensive Utilization ◽  
Iron Concentrate ◽  
Low Intensity ◽  
National Resource

Recovering valuable metal from tailings has always been one of national resource comprehensive utilization key research subjects. There are copper-bearing magnetite which contains 43.31% of iron and 0.21% of copper in some places. After grinding-low intensity magnetic separation-flotation process can get 68.87% of iron concentrate with recovery 64.39% and copper concentrate which contain copper 12.67% with recovery of 75.30%. The experiment results will provide an effective way to comprehensive utilize the resource in one area.

scholarly journals Technological research on converting iron ore tailings into a marketable product

2021 ◽  
Vol 121 (5) ◽  
Author(s):  
I. Mitov ◽  
A. Stoilova ◽  
B. Yordanov ◽  
D. Krastev
Keyword(s):  
Magnetic Separation ◽  
Iron Ore ◽  
Zinc Content ◽  
Mass Yield ◽  
Iron Recovery ◽  
Flotation Process ◽  
Iron Concentrate ◽  
Iron Ore Tailings ◽  
Lead And Zinc ◽  
Magnetizing Roasting

SYNOPSIS We present three technological scenarios for the recovery of valuable components from gangue, stored in the tailings dam at Kremikovtzi metallurgical plant in Bulgaria, into marketable iron-containing pellets. In the first approach the iron concentrate was recovered through a two-stage flotation process, desliming, and magnetic separation. In the second proposed process, the iron concentrate was subjected to four sequential stages of magnetic separation coupled with selective magnetic flocculation. The third route entails the not very common practice of magnetizing roasting, followed by selective magnetic flocculation, desliming, and magnetic separation. The iron concentrate was pelletized in a laboratory-scale pelletizer. Each technology has been assessed with regard to the mass yield of iron concentrate, the iron recovery. and the iron, lead, and zinc content in order to identify the most effective route. Keywords: tailings reprocessing, magnetizing roasting, pelletization.

Research on the Middlings from Dong Anshan Iron Ore by Roasting-Magnetic Dressing

2013 ◽  
Vol 826 ◽  
pp. 102-105
Author(s):  
Ji Wei Lu ◽  
Nai Ling Wang ◽  
Wan Zhong Yin ◽  
Rui Chao Zhao ◽  
Chuang Yuan
Keyword(s):  
Magnetic Separation ◽  
Iron Ore ◽  
Reduction Roasting ◽  
Iron Recovery ◽  
Flotation Process ◽  
Iron Concentrate ◽  
Iron Grade

For the middlings (containing siderite) separated from Dong Anshan carbonaceous iron ore which was dressed by a two-step flotation process, using roasting-magnetic and regrinding-magnetic separation, the iron concentrate with iron grade and iron recovery of 60.31%, 87.49% was obtained. Mechanism of reduction-roasting was studied by means of XRD in the end.

Sign in / Sign up

Export Citation Format

Share Document