Experimental Study on the Mineral Processing of a High-Clay and Lean Hematite

2012 ◽  
Vol 550-553 ◽  
pp. 2831-2834
Author(s):  
Wei Zhi Wang ◽  
Qing Mei Jia ◽  
Chun Guang Yang
Keyword(s):  
Experimental Study ◽  
Magnetic Separation ◽  
Experimental Research ◽  
High Intensity ◽  
Mineral Processing ◽  
Shaking Table ◽  
Iron Recovery ◽  
Iron Concentrate ◽  
Second Stage ◽  
Low Intensity

The mineral processing experimental research was carried out on a high mud content lean hematite. The results showed that using the technological flowsheet of “stage grinding- low intensity magnetic separation for obtaining concentrate - high-intensity magnetic separation for discarding tailings-gravity separation(shaking table)”,a final iron concentrate with TFe grade of 65.89% ,yield of 19.35% and iron recovery of 52.32% from the raw ores with TFe grade of 24.07％ was obtained, with the first stage grinding size being 50% -200 mesh and the second stage,95% -200 mesh.

Experimental Research on the Iron Separation from an Ultra Poor Iron Ore

2012 ◽  
Vol 535-537 ◽  
pp. 746-749
Author(s):  
Wei Zhi Wang ◽  
Li Ping Chen ◽  
Chun Guang Yang
Keyword(s):  
Magnetic Separation ◽  
Iron Ore ◽  
Low Grade ◽  
Iron Recovery ◽  
Magnetic Separator ◽  
Iron Concentrate ◽  
Second Stage ◽  
Low Intensity ◽  
Two Stages ◽  
Titanium Magnetite

Test was made on separating iron from a ultra-low-grade vanadium titanium magnetite ore by a process of tailing discarding at a coarser size，staged grinding and staged low intensity magnetic separation. The results show that when the raw ore is treated by permanent dry magnetic separator with low intensity magnetic separation at 12～0 mm size，qualified tailings of about 20% yield can be discarded．The coarse concentrate is grounded in two stages. With the first stage grinding size being 45% -200 mesh and the second stage，75% -200 mesh，and then treated by two stage low intensity magnetic separation．As a result，an iron concentrate with a TFe grade of 65.80%and an iron recovery of 47.74%can be achieved．

Experimental Studies on a Mineral Containing Titanium in Baoding Area

2013 ◽  
Vol 826 ◽  
pp. 34-37 ◽  
Author(s):  
Guo Zhen Liu ◽  
Shu Juan Dai ◽  
Li Mei Bai ◽  
Yu Xin Ma ◽  
Yong Zhang
Keyword(s):  
Magnetic Separation ◽  
High Intensity ◽  
Ph Value ◽  
Experimental Studies ◽  
Mineral Processing ◽  
Shaking Table ◽  
Gravity Concentration

The main elements can be recovered for mineral processing in a mineral containing titanium of Baoding area were Ti, Fe and V, and the elements in the main gangue minerals were Si and Al. Gravity concentration, gravity concentration-high intensity magnetic separation and gravity concentration-flotation tests were performed on the ore sample respectively. The results showed that, in the test of shaking table, when the grinding fineness was -0.074mm 93%, the productivity of concentrate can reach 32.24%; when grinding fineness was -0.074mm 93%, after gravity concentration-magnetic separation, 30.25% of concentrate productivity can be attained; when the grinding fineness was -0.074mm 85%, after gravity concentration-flotation, the productivity of concentrate was 3.31%. Maybe it's the condition of the tests wasn't controlled well, especially adjusting pH value in the flotation stage, it's hard to control, so the results were not very good.

Mineral Processing Technology Study on a Lean Hematite Ore with Finely-Disseminated Minerals

2013 ◽  
Vol 303-306 ◽  
pp. 2473-2476
Author(s):  
Wei Zhi Wang ◽  
Li Hui Zhou ◽  
Chun Guang Yang
Keyword(s):  
Mineral Processing ◽  
Low Grade ◽  
Iron Recovery ◽  
Technology Study ◽  
Complex Composition ◽  
Flotation Process ◽  
Iron Concentrate ◽  
Second Stage ◽  
Fine Grain ◽  
Hematite Ore

The mineral processing experimental research was carried out on the hematite bearing characteristics of low grade, fine grain,complex composition. The results showed that using the technological flowsheet of “stage grinding- low intensity magnetic separation”, the iron concentrate with recovery of 36.56% and grade of 65.85% Fe can be obtained. And the iron concentrate with recovery of 17.23% and grade of 63.53% Fe can be obtained by “stage grinding-HIMS process-reverse flotation” process. The final iron concentrate with TFe grade of 65.10%,yield of 19.19% and total iron recovery of 53.79% from the raw ores with TFe grade of 23.41％ was obtained, with the first stage grinding size being 55% -0.074mm and the second stage,93% -0.074mm.

Low Grade of Kyanite Ore Beneficiation Experimental Research in Xingtai

2012 ◽  
Vol 602-604 ◽  
pp. 115-119
Author(s):  
Jin Xia Zhang ◽  
Qi Hui Dai ◽  
Li Nan Tian ◽  
Xing Guo Wang
Keyword(s):  
Chemical Composition ◽  
Magnetic Separation ◽  
Experimental Research ◽  
High Intensity ◽  
Raw Material ◽  
Low Grade ◽  
High Grade ◽  
Market Demand ◽  
Low Intensity ◽  
Mineral Constituent

As high-grade refractories raw material，kyanite is widely used and the market demand is increasingly greater. To identify the process mineralogical properties of kyanite from Heibei so as to provide a mineralogical basis for its chemical composition, mineral constituent，ores texture and structure and so on. The results show that: the kyanite Al2O3 21.50%, SiO2 52.87%, using high intensity magnetic separation-gravity separation-flotation folwsheet. Experiments show that, the grinding fineness of -200 mush 65%, with strong intensity magnetic separation, magnetic concentrate by shaking the low intensity magnetic separation，we can get magnetite, garnet, biotite and phlogopite four concentrates, strong magnetic ore tailings consolidated by a rocking bed mud thrown first, refined through flotation, won Kyanite concentrate grading about 56.11% at a recovery of 49.90%.

Experimental Research on Low Grade Copper-Bearing Magnetite in one Area

2011 ◽  
Vol 347-353 ◽  
pp. 157-162
Author(s):  
Jun Liu ◽  
Jiang An Chen
Keyword(s):  
Magnetic Separation ◽  
Experimental Research ◽  
Low Grade ◽  
Research Subjects ◽  
Flotation Process ◽  
Valuable Metal ◽  
Comprehensive Utilization ◽  
Iron Concentrate ◽  
Low Intensity ◽  
National Resource

Recovering valuable metal from tailings has always been one of national resource comprehensive utilization key research subjects. There are copper-bearing magnetite which contains 43.31% of iron and 0.21% of copper in some places. After grinding-low intensity magnetic separation-flotation process can get 68.87% of iron concentrate with recovery 64.39% and copper concentrate which contain copper 12.67% with recovery of 75.30%. The experiment results will provide an effective way to comprehensive utilize the resource in one area.

Experimental Research on Mineral Processing Technique of a Brazilian Specularite

2012 ◽  
Vol 535-537 ◽  
pp. 742-745
Author(s):  
Wei Zhi Wang ◽  
Qing Mei Jia ◽  
Chun Guang Yang
Keyword(s):  
Magnetic Field ◽  
Magnetic Separation ◽  
Processing Technique ◽  
Mineral Processing ◽  
Gravity Separation ◽  
Laboratory Research ◽  
High Grade ◽  
Iron Concentrate ◽  
Low Intensity ◽  
The Magnetic Field

Laboratory research on the mineral processing technique of a specularite ore from Baxi was performed, while the processes including gravity separation, low intensity magnetic separation(LIMS) -high intensity magnetic separation(HIMS)-gravity separation was adopted. The run-of-mine ore was milled till the -0.074 mm range accounts for 50% and treated through a LIMS – HIMS process, with the magnetic field strength of LIMS being 95.52 kA/m and HIMS,1.2T. As a result, an iron concentrate grading about 67.58% at a recovery of 96.21% can be obtained, which are rather good metallurgical performances. The iron concentrate with high grade also could be beneficiated by table separation, but its recovery is lower than it obtained from intensive LIMS – HIMS dressing.

Experimental Research on Beneficiation Process for a Specularite Ore

2011 ◽  
Vol 304 ◽  
pp. 387-390 ◽  
Author(s):  
Wei Zhi Wang ◽  
Jin Rui Zhang ◽  
Chun Guang Yang
Keyword(s):  
Magnetic Separation ◽  
Experimental Research ◽  
High Intensity ◽  
Iron Ore ◽  
Separation Process ◽  
Gravity Separation ◽  
Clay Material ◽  
Reverse Flotation ◽  
Test Results ◽  
Iron Concentrate

An iron ore contains specularite and hematite which are its main iron minerals. And its main gangue minerals are specularite, part of the clay material and a small amount of quartz.Tests are made on the ore by adopting processes including gravity separation, high intensity magnetic separation, high intensity magnetic-gravity separation and high intensity magnetic - reverse flotation. The test results show that the separation process of high intensity magnetic-reverse flotation can obtain an iron concentrate grading about 66.62% at a recovery of 58.38％ from an iron ore assaying around 35.00% iron, rather good metallurgical performances.

Experimental Research on Comprehensive Recovery of Iron and Phosphorus from the Low Grade Vanadium-Titanium Magnetite Ore

2012 ◽  
Vol 549 ◽  
pp. 478-481 ◽  
Author(s):  
Wei Zhi Wang ◽  
Li Ping Chen ◽  
Chun Guang Yang
Keyword(s):  
Experimental Research ◽  
Mineral Resources ◽  
Low Grade ◽  
Iron Recovery ◽  
Iron Concentrate ◽  
Low Intensity ◽  
Magnetite Ore ◽  
Vanadium Titanium ◽  
Comprehensive Recovery ◽  
Titanium Magnetite

An experimental research on comprehensive recovery of iron and associated apatite from a low grade vanadiferous titanomagnetite ore with high phosphorus was carried out. The results showed that using the technological flowsheet of “low -intensity magnetic separation-flotation”, not only the magnetite can be effectively separated, but the associated apatite in the mineral resources can also be satisfactorily recovered. An iron concentrate with a TFe grade of 64.81% and iron recovery of 58.04% and a high-quality phosphorus concentrate of 33.50% P2O5 with a yield of 92.18% is obtained．

A Combined Beneficiation Process to Recover Iron Minerals from a Finely Disseminated Low-Grade Iron Ore

2013 ◽  
Vol 634-638 ◽  
pp. 3273-3276
Author(s):  
Si Qing Liu ◽  
Min Zhang ◽  
Wan Ping Wang ◽  
Xiu Juan Li
Keyword(s):  
Magnetic Separation ◽  
Iron Ore ◽  
Shaking Table ◽  
Low Grade ◽  
Gravity Concentration ◽  
Iron Minerals ◽  
Iron Concentrate ◽  
Low Intensity ◽  
Mineralogical Study ◽  
Basic Facts

In this research, a refractory iron ore is processed, according to the basic facts of mineralogical study. Mineralogy shows that the ore is characterized by the finely disseminated iron minerals with a small amount in the ore. Iron minerals in the ore are mainly hematite and magnetite. On the basis of the ore characteristic, a flowsheet of "stage grinding-low intensity magnetic separation-high intensity magnetic separation-gravity concentration by fine shaking table" was developed. An iron concentrate assaying 51.45% Fe at a recovery of 62.12% was obtained when the raw ore contains 18.61% Fe.

Beneficiation Process Optimization Study on a Low-Grade Hematite Ore

2013 ◽  
Vol 303-306 ◽  
pp. 2461-2464
Author(s):  
Wei Zhi Wang ◽  
Qing Mei Jia ◽  
Chun Guang Yang
Keyword(s):  
Process Optimization ◽  
High Intensity ◽  
Iron Ore ◽  
Low Grade ◽  
Iron Recovery ◽  
Magnetic Separator ◽  
Iron Concentrate ◽  
Second Stage ◽  
Optimization Study ◽  
Hematite Ore

A hematite has low grade, fine disseminated size andcomplex disseminated relations, which are refractory iron ore. Using SLon pulsating high gradient magnetic separator, induction intensity 8500Oe, pulsating 20mm stroke, stroke of 120 beats / min), a crude iron ore concentrates a grade of 35.93.%, the recovery rate of 82.39% is obtained through high intensity magnetic separation.( The final iron concentrate with TFe grade of 64.83%,yield of 14.55% and iron recovery of 35.74% from the raw ores with TFe grade of 26.29％ was obtained, with the first stage grinding size being 50% -0.074mm and the second stage,95% -0.074mm.

Sign in / Sign up

Export Citation Format

Share Document