Effect of Different Aromatic Carboxylic Acid Ligands on the Catalytic Activities of Metal-Organic Frameworks

2013 ◽  
Vol 634-638 ◽  
pp. 513-517 ◽  
Author(s):  
Li Ping Wang ◽  
Gong Ying Wang ◽  
Fan Wang ◽  
Pin Hua Wang
Keyword(s):  
Carboxylic Acid ◽  
Average Molecular Weight ◽  
Metal Organic Frameworks ◽  
Diphenyl Carbonate ◽  
X Ray Diffraction ◽  
Aromatic Carboxylic Acid ◽  
X Ray ◽  
Catalytic Activities ◽  
Polycondensation Process ◽  
Metal Organic

Metal-organic frameworks based on Zn2+ and different aromatic carboxylic acid ligands were prepared and characterized by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. They were then used as the catalysts for the transesterification between diphenyl carbonate (DPC) and 1, 4-butyldiol (1, 4-BD) to polycarbonate diol (PCDL). Their catalytic activities in the transesterification process were evaluated by the yield of phenol, and their catalytic activities in the polycondensation process were determined by the number-average molecular weight (Mn) and the hydroxyl value.

Synthesis, crystal structure, luminescence, and photocatalytic properties of a 2D Cu(II) metal-organic frameworks based on 3,5-di(1H-benzimidazol-1-yl)pyridine and 4,4′-oxybis(benzoate) ligands

2020 ◽  
Vol 75 (8) ◽  
pp. 727-732
Author(s):  
Chen Zhang ◽  
Jian-Qing Tao
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Uv Light ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Metal Organic

AbstractA new Cu(II) metal-organic framework, [Cu(L)(OBA)·H2O]n (1) [H2OBA = 4,4′-oxybis(benzoic acid), L = 3,5-di(1H-benzimidazol-1-yl)pyridine] was hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis and single-crystal X-ray diffraction. Complex 1 is a four-connected uni-nodal 2D net with a (44·62) topology which shows an emission centered at λ ∼393 nm upon excitation at λ = 245 nm. Moreover, complex 1 possesses high photocatalytic activities for the decomposition of Rhodamine B (RhB) under UV light irradiation.

scholarly journals In situ X‐ray Diffraction Investigation of the Crystallisation of Perfluorinated Ce(IV)‐based Metal‐Organic Frameworks with UiO‐66 and MIL‐140 architectures

2021 ◽  
Author(s):  
Stephen J. I. Shearan ◽  
Jannick Jacobsen ◽  
Ferdinando Costantino ◽  
Roberto D’Amato ◽  
Dmitri Novikov ◽  
...  
Keyword(s):  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Metal Organic

A MOF based on a lead(II) 2-oxido-6-methylpyridine-4-carboxylate network

2020 ◽  
Vol 75 (4) ◽  
pp. 365-369
Author(s):  
Long Tang ◽  
Yu Pei Fu ◽  
Na Cui ◽  
Ji Jiang Wang ◽  
Xiang Yang Hou ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Carboxylic Acid ◽  
Thermogravimetric Analysis ◽  
Metal Organic Framework ◽  
X Ray Diffraction ◽  
X Ray ◽  
Connected Node ◽  
Metal Organic ◽  
Solid State Fluorescence

AbstractA new metal-organic framework, [Pb(hmpcaH)2]n (1), has been hydrothermally synthesized from Pb(OAc)2 · 3H2O and 2-hydroxy-6-methylpyridine-4-carboxylic acid (hmpcaH2; 2), and characterized by IR spectroscopy, elemental and thermogravimetric analysis, and single-crystal X-ray diffraction. In complex 1, each hmpcaH− ligand represents a three-connected node to combine with the hexacoordinated Pb(II) ions, generating a 3D binodal (3,6)-connected ant network. The crystal structure of 2 was determined. The solid-state fluorescence properties of 1 and 2 were investigated.

A series of microporous and robust Ln-MOFs showing luminescent properties and catalytic performances towards Knoevenagel reactions

2021 ◽  
Author(s):  
Qing-Xia Yao ◽  
Miaomiao Tian ◽  
Jun Zheng ◽  
Jintang Xue ◽  
Xuze Pan ◽  
...  
Keyword(s):  
Single Crystal ◽  
Metal Organic Frameworks ◽  
Luminescent Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Metal Organic ◽  
Catalytic Performances

A series of microporous Ln(III)-based metal-organic frameworks (1-Ln) have been hydrothermally synthesized by using 4,4',4''-nitrilotribenzoic acid (H3NTB). Single crystal X-ray diffraction analyses show 1-Ln are isostructural and have 3D porous...

scholarly journals Compressibility Studies of Zirconium Based Metal-Organic Frameworks

2014 ◽  
Vol 70 (a1) ◽  
pp. C157-C157
Author(s):  
Claire Hobday ◽  
Stephen Moggach ◽  
Carole Morrison ◽  
Tina Duren ◽  
Ross Forgan
Keyword(s):  
High Pressure ◽  
Mechanical Stability ◽  
Metal Organic Frameworks ◽  
External Pressure ◽  
X Ray Diffraction ◽  
X Ray ◽  
X Ray Crystallography ◽  
Pressure Medium ◽  
Metal Organic ◽  
University Of Oslo

Metal-organic frameworks (MOFs) are a well-studied class of porous materials with the potential to be used in many applications such as gas storage and catalysis.[1] UiO-67 (UiO = University of Oslo), a MOF built from zirconium oxide units connected with 4,4-biphenyldicarboxylate (BDC) linkers, forms a face centred cubic structure. Zirconium has a high affinity towards oxygen ligands making these bridges very strong, resulting in UiO-based MOFs having high chemical and thermal stability compared to other MOF structures. Moreover, UiO-67 has become popular in engineering studies due to its high mechanical stability.[2] Using high pressure x-ray crystallography we can exert MOFs to GPa pressures, experimentally exploring the mechanical stability of MOFs to external pressure. By immersing the crystal in a hydrostatic medium, pressure is applied evenly to the crystal. On surrounding a porous MOF with a hydrostatic medium composed of small molecules (e.g. methanol), the medium can penetrate the MOF, resulting in medium-dependant compression. On compressing MOF-5 (Zn4O(BDC)3) using diethylformamide as a penetrating medium, the framework was shown to have an increased resistance to compression, becoming amorphous several orders of magnitude higher in pressure than observed on grinding the sample.[3] Here we present a high-pressure x-ray diffraction study on the UiO-based MOF UiO-67, and several new synthesised derivatives built from same metal node but with altered organic linkers, allowing us to study in a systematic way, the mechanical stability of the MOF, and its pressure dependence on both the linker, and pressure medium.

scholarly journals Four Novel d10 Metal-Organic Frameworks Incorporating Amino-Functionalized Carboxylate Ligands: Synthesis, Structures, and Fluorescence Properties

2021 ◽  
Vol 9 ◽  
Author(s):  
Wang Xie ◽  
Jie Wu ◽  
Xiaochun Hang ◽  
Honghai Zhang ◽  
Kang shen ◽  
...  
Keyword(s):  
Metal Organic Frameworks ◽  
Three Dimensional ◽  
Fluorescence Properties ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Quenching Effect ◽  
D10 Metal ◽  
Metal Organic ◽  
Point Symbol

By employment of amino-functionalized dicarboxylate ligands to react with d10 metal ions, four novel metal-organic frameworks (MOFs) were obtained with the formula of {[Cd(BCPAB)(μ2-H2O)]}n (1), {[Cd(BDAB)]∙2H2O∙DMF}n (2), {[Zn(BDAB)(BPD)0.5(H2O)]∙2H2O}n (3) and {[Zn(BDAB)(DBPB)0.5(H2O)]∙2H2O}n (4) (H2BCPAB = 2,5-bis(p-carbonylphenyl)-1-aminobenzene; H2BDAB = 1,2-diamino-3,6-bis(4-carboxyphenyl)benzene); BPD = (4,4′-bipyridine); DBPB = (E,E-2,5-dimethoxy-1,4-bis-[2-pyridin-vinyl]-benzene; DMF = N,N-dimethylformamide). Complex 1 is a three-dimensional (3D) framework bearing seh-3,5-Pbca nets with point symbol of {4.62}{4.67.82}. Complex 2 exhibits a 4,4-connected new topology that has never been reported before with point symbol of {42.84}. Complex 3 and 4 are quite similar in structure and both have 3D supramolecular frameworks formed by 6-fold and 8-fold interpenetrated 2D coordination layers. The structures of these complexes were characterized by single crystal X-ray diffraction (SC-XRD), thermal gravimetric analysis (TGA) and powder X-ray diffraction (PXRD) measurements. In addition, the fluorescence properties and the sensing capability of 2–4 were investigated as well and the results indicated that complex 2 could function as sensor for Cu2+ and complex 3 could detect Cu2+ and Ag+via quenching effect.

scholarly journals In situ X-ray Diffraction Investigation of the Crystallisation of Perfluorinated Ce(IV)-based Metal-Organic Frameworks with UiO-66 and MIL-140 architectures

2020 ◽  
Author(s):  
Stephen Shearan ◽  
Jannick Jacobsen ◽  
Ferdinando Costantino ◽  
Roberto D’Amato ◽  
Dmitri Novikov ◽  
...  
Keyword(s):  
Crystal Growth ◽  
Metal Organic Frameworks ◽  
Building Blocks ◽  
Nucleation And Growth ◽  
X Ray Diffraction ◽  
X Ray ◽  
Rate Determining Step ◽  
Wide Range ◽  
Metal Organic

We report on the results of a thorough <i>in situ</i> synchrotron powder X-ray diffraction study of the crystallisation in aqueous medium of two recently discovered perfluorinated Ce(IV)-based metal-organic frameworks (MOFs), analogues of the already well investigated Zr(IV)-based UiO-66 and MIL-140A, namely, F4_UiO-66(Ce) and F4_MIL-140A(Ce). The two MOFs were originally obtained in pure form in similar conditions, using ammonium cerium nitrate and tetrafluoroterephthalic acid as building blocks, and small variations of the reaction parameters were found to yield mixed phases. Here, we investigate the crystallisation of these compounds <i>in situ</i> in a wide range of conditions, varying parameters such as temperature, amount of the protonation modulator nitric acid (HNO<sub>3</sub>) and amount of the coordination modulator acetic acid (AcOH). When only HNO<sub>3</sub> is present in the reaction environment, F4_MIL-140A(Ce) is obtained as a pure phase. Heating preferentially accelerates nucleation, which becomes rate determining below 57 °C, whereas the modulator influences nucleation and crystal growth to a similar extent. Upon addition of AcOH to the system, alongside HNO<sub>3</sub>, mixed-phased products, consisting of F4_MIL-140A(Ce) and F4_UiO-66(Ce), are obtained. In these conditions, F4_UiO-66(Ce) is always formed faster and no interconversion between the two phases occurs. In the case of F4_UiO-66(Ce), crystal growth is always the rate determining step. An increase in the amount of HNO<sub>3</sub> slows down both nucleation and growth rates for F4_MIL-140A(Ce), whereas nucleation is mainly affected for F4_UiO-66(Ce). In addition, a higher amount HNO<sub>3</sub> favours the formation of F4_MIL-140A(Ce). Similarly, increasing the amount of AcOH leads to slowing down of the nucleation and growth rate, but favours the formation of F4_UiO-66(Ce). The pure F4_UiO-66(Ce) phase could also be obtained when using larger amounts of AcOH in the presence of minimal HNO<sub>3</sub>. Based on these <i>in situ</i> results, a new optimised route to achieving a pure, high quality F4_MIL-140A(Ce) phase in mild conditions (60 °C, 1 h) is also identified.

Electrochemical performance of M3(BTC)2·12H2O (M=Co, Ni, and Zn) for Supercapacitors

2011 ◽  
Vol 15 (2) ◽  
pp. 79-82
Author(s):  
Chenmin Liao ◽  
Jiachang Zhao ◽  
Bohejin Tang ◽  
Aomin Tang ◽  
Yanhong Sun ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Electrochemical Impedance ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scan Rate ◽  
Metal Organic ◽  
Acetate Hydrate ◽  
Xrd Patterns ◽  
Maximum Specific Capacitance

A series of Metal-Organic Frameworks (MOFs) based on 1,3,5-benzenetricarboxylic (BTC) acid and M(II) acetate hydrate (M=Co, Ni, and Zn) were successfully synthesized and named as M3(BTC)2·12H2O. These compounds were examined by X-ray diffraction (XRD) patterns. Electrochemical properties of the materials were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in 6 M KOH aqueous solutions. The maximum specific capacitance of Ni3(BTC)2·12H2O is found to be 429 F g-1 at 5 mV s-1 and 154 F g-1 at 200 mV s-1 scan rate.

Synthesis, crystal structures, and thermal and spectroscopic properties of two Cd(II) metal-organic frameworks with a versatile ligand

2016 ◽  
Vol 71 (8) ◽  
pp. 909-917 ◽  
Author(s):  
Jia-Ming Li ◽  
Kun-Huan He ◽  
Zhong-Feng Shi ◽  
Hui-Yuan Gao ◽  
Yi-Min Jiang
Keyword(s):  
Room Temperature ◽  
Metal Organic Frameworks ◽  
Spectroscopic Properties ◽  
Supramolecular Architecture ◽  
X Ray Diffraction ◽  
X Ray ◽  
Bridging Ligand ◽  
Hydrogen Bond Interactions ◽  
Distorted Octahedral ◽  
Metal Organic

AbstractTwo new metal-organic frameworks, namely, [Cd(L)(H2O)]n (1) and {[Cd0.5(L)(4,4′-bipy)0.5][Cd0.5(H2O)(4,4′-bipy)0.5]·H2O}n (2), where H2L = N-pyrazinesulfonyl-glycine and 4,4′-bipy = 4,4′-bipyridine, have been synthesized and characterized by single-crystal X-ray diffraction, IR spectroscopy, elemental, thermogravimetric, and photoluminescent analysis. X-ray diffraction crystallographic analyses indicate that 1 displays a distorted octahedral metal coordination in a 3-connected (4, 82) topology, while the molecular structure of 2 has a 4-connected (4, 4) topology with two perfectly octahedrally coordinated Cd centers. The L2– ligand serves as a N,N,O-tridentate, μ2-pyrazine-bridging, and μ2-carboxylate-bridging ligand in 1, and as a N,O-bidentate and μ2-carboxylate-bridging ligand in 2. In the crystal, a 3D supramolecular architecture is formed by O–H···O hydrogen bond interactions in 1, but through O–H···O as well as π···π stacking in 2. The two compounds show intense fluorescence in the solid state at room temperature.

Sign in / Sign up

Export Citation Format

Share Document