Study on the Ultrasonic Characteristics in the Contact Interface under Ultrasonic Cutting

2013 ◽  
Vol 690-693 ◽  
pp. 2550-2553
Author(s):  
Ming Zhang ◽  
Zheng Liu ◽  
Feng Jiao
Keyword(s):  
Ultrasonic Vibration ◽  
Cutting Process ◽  
Transmission Model ◽  
Contact Interface ◽  
Vibration Cutting ◽  
Cutting System ◽  
Ultrasonic Vibration Cutting ◽  
Ultrasonic Cutting

The ultrasonic transmission model is established in the ultrasonic cutting process based on the ultrasound oval cutting device made by ourselves and the different vibration cutting effects is analyzed under the ultrasonic cutting process in this paper. The ultrasonic transmission at the contact interface is vulnerably affected by preload force factors and so on by the vibration experiments of the ultrasonic vibration cutting system.

Development of the Two-Dimensional Ultrasonic Cutting System Based on the Mechanism of Single-Excitation Elliptical Vibration by Means of Opening Chutes on the Horn

2016 ◽  
Vol 693 ◽  
pp. 1272-1278
Author(s):  
Jie Li ◽  
Feng Jiao ◽  
Ying Niu ◽  
Long Fei Shi
Keyword(s):  
Cutting Force ◽  
Ultrasonic Vibration ◽  
Two Dimensional ◽  
Vibration Cutting ◽  
Elliptical Vibration ◽  
Cutting Experiments ◽  
Cutting System ◽  
Ultrasonic Vibration Cutting ◽  
Ultrasonic Cutting ◽  
Force Characteristics

Based on the mechanism of single-excitation elliptical vibration by means of opening chutes on the horn, a novel two-dimensional ultrasonic cutting system was developed. Vibration characteristics of the two-dimensional ultrasound cutting system were researched and the longitudinal and bending amplitude of the system with different number of chutes were obtained. By using developed two-dimensional ultrasonic vibration cutting systems, series of cutting experiments were carried out and cutting force characteristics were researched compared with that in traditional cutting.

scholarly journals Mechanically Enabled Two-Axis Ultrasonic-Assisted System for Ultra-Precision Machining

Micromachines ◽  
2020 ◽  
Vol 11 (5) ◽  
pp. 522 ◽  
Author(s):  
Nan Yu ◽  
Jinghang Liu ◽  
Hélène Mainaud Durand ◽  
Fengzhou Fang
Keyword(s):  
Ultrasonic Vibration ◽  
Brittle Materials ◽  
Optimization Strategy ◽  
Application Development ◽  
Element Analysis ◽  
Vibration Cutting ◽  
Fea Model ◽  
Ultrasonic Assisted ◽  
Cutting System ◽  
Ultrasonic Vibration Cutting

With the use of ultrasonic-assisted diamond cutting, an optical surface finish can be achieved on hardened steel or even brittle materials such as glass and infrared materials. The proposed ultrasonic vibration cutting system includes an ultrasonic generator, horn, transducer, cutting tool and the fixture. This study is focused on the design of the ultrasonic vibration cutting system with a high vibration frequency and an optimized amplitude for hard and brittle materials, particularly for moulded steel. A two-dimensional vibration design is developed by means of the finite element analysis (FEA) model. A prototype of the system is manufactured for the test bench. An elliptical trajectory is created from this vibration system with amplitudes of micrometers in two directions. The optimization strategy is presented for the application development.

Study on the Mechanical Properties of the Elliptic Ultrasonic Vibration Cutting Process

2010 ◽  
Vol 43 ◽  
pp. 499-504 ◽  
Author(s):  
Hua Li ◽  
Zi Yang Cao
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Cutting Force ◽  
Ultrasonic Vibration ◽  
Cutting Process ◽  
Vibration Cutting ◽  
Ultrasonic Vibration Cutting

In this paper,the mechanical properties of the elliptic ultrasonic vibratioon cutting were proposed systemiticaly through thoretical analysis，the model of the average cutting force in the elliptic ultrasonic vibration cutting process was established. The performance of the the properties to the machining acurracy and the surface roughness was studied through experiment.

Study on Ultrasonic Generator for Ultrasonically Assisted Machining

2013 ◽  
Vol 797 ◽  
pp. 320-325 ◽  
Author(s):  
Ying Shuai Xu ◽  
Ping Zou ◽  
Xu Lei Yang ◽  
Yu He
Keyword(s):  
Ultrasonic Vibration ◽  
Ultrasonic Transducer ◽  
Signal Generator ◽  
Ultrasonic Machining ◽  
Direct Digital Frequency Synthesis ◽  
Vibration Cutting ◽  
Cutting Test ◽  
Machining System ◽  
Cutting System ◽  
Ultrasonic Vibration Cutting

Ultrasonic vibration cutting can be widely used in lathe, planer, milling machine, grinding machine, thread processing and gear processing, etc. Ultrasonic vibration cutting system is composed mainly of ultrasonic generator, ultrasonic transducer, luffing rod, cutting tool, etc. Here, ultrasonic generator is the most important. The stand or fall of signal, which is produced by ultrasonic generator, has direct influence on anticipated effect and ability of ultrasonic machining. In order to generate a signal, which can be suitable for ultrasonic machining, ultrasonic vibration cutting system is studied, and ultrasonic signal generator based on direct digital frequency synthesis (DDS) is designed and conducted a cutting test with this ultrasonic machining system. The results show that the signal generator, which is made up by DDS technology, can generate the signal with stability, reliability and greater flexibility, and can be fully applicable to the ultrasonic machining.

Theoretical Study on Stability of the Separable Elliptic Ultrasonic Vibration Cutting Process

2011 ◽  
Vol 109 ◽  
pp. 210-215
Author(s):  
Hua Li ◽  
Ke Feng Song ◽  
Zhen Yin ◽  
Zi Yang Cao
Keyword(s):  
Ultrasonic Vibration ◽  
Theoretical Study ◽  
Cutting Process ◽  
Kinematics And Dynamics ◽  
Dynamics Analysis ◽  
Vibration Cutting ◽  
Physical Essence ◽  
The Stability ◽  
Ultrasonic Vibration Cutting

By kinematics and dynamics analysis of the separate elliptic ultrasonic vibration cutting process, the mechanism of elliptic ultrasonic vibration on cutting process is revealed, and the physical essence of improving the stability of cutting process is clarified.

Sign in / Sign up

Export Citation Format

Share Document