Failure Effects of Anti-Hunting Damper on High-Speed Train

2013 ◽  
Vol 694-697 ◽  
pp. 90-94 ◽  
Author(s):  
Ji Min Zhang ◽  
Li Wen Man
Keyword(s):  
Dynamic Model ◽  
High Speed ◽  
Critical Speed ◽  
Dynamic Performance ◽  
High Speed Train ◽  
Multi Body ◽  
Body Dynamic

The multi-body dynamic model of the high-speed train is established in order to study the failure effects of anti-hunting damper. Four kinds of failure case of the anti-hunting damper are compared, specifically including: one anti-hunting damper of the front bogie is broken; two anti-hunting dampers of the front bogie are broken; three anti-hunting dampers of the front bogie are broken; all four anti-hunting dampers of the front bogie are broken. The results have shown: when only one anti-hunting damper is broken, the influence to the dynamic performance of the high speed train is small, but once two anti-hunting dampers or more out of work, the critical speed of the vehicle decreases much more and the curve-passing performance also become worse.

Research on Running Stability of the Rail Vehicle Based on SIMPACK

2013 ◽  
Vol 328 ◽  
pp. 589-593
Author(s):  
Li Hua Wang ◽  
An Ning Huang ◽  
Guang Wei Liu
Keyword(s):  
Dynamic Model ◽  
Optimization Design ◽  
Dynamic Performance ◽  
Running Speed ◽  
Design And Optimization ◽  
Rail Vehicle ◽  
Body Dynamics ◽  
Multi Body ◽  
Body Dynamic ◽  
Track Irregularities

There are higher requirements on running stability of the rail vehicle with the incensement of the running speed. The running stability is one of the important indicators of evaluating the dynamic performance of the rail vehicle. In this paper, the whole multi-body dynamic model of the rail vehicle was proposed based on the theory of multi-body dynamics in the software of Simpack. And the lateral and vertical vibrate accelerations of the rail vehicle were simulated when it was inspired by the track irregularities. Then the running stabilities of the rail vehicle were estimated accurately. This will propose basis on the improving design and optimization design of the whole rail vehicle.

Analysis on Critical Speeds of the Rail Vehicle Based on SIMPACK

2013 ◽  
Vol 694-697 ◽  
pp. 69-72
Author(s):  
Li Hua Wang ◽  
An Ning Huang ◽  
Guang Wei Liu
Keyword(s):  
Dynamic Model ◽  
Dynamic Performance ◽  
Critical Speeds ◽  
Rail Vehicle ◽  
Body Dynamics ◽  
Linear And Nonlinear ◽  
Multi Body ◽  
Body Dynamic

Critical speeds are the important indicators when evaluating the dynamic performance of the rail vehicle. In this paper, the whole multi-body dynamic model of the rail vehicle was proposed based on the theory of multi-body dynamics in the software of Simpack. And the linear and nonlinear critical speeds of the whole rail vehicle inspirited by the track spectrum were simulated. This will provide a basis for analyzing on the whole rail vehicle.

Conjugate Meshing Roller Chain for Timing Mechanism

2010 ◽  
Vol 455 ◽  
pp. 92-97
Author(s):  
Yong Wang
Keyword(s):  
Dynamic Model ◽  
High Speed ◽  
Tooth Profile ◽  
Arc Length ◽  
Timing Mechanism ◽  
Modification Method ◽  
Chain Transmission ◽  
The Stability ◽  
Multi Body ◽  
Body Dynamic

In this paper, new sprocket tooth profile is developed to reduce polygonal action and meshing impact under high speed. The new conjugated profile is derived by modifying involute profile to guarantee that the moving distance of chain is equal to the arc length of pitch circle that sprocket rotates at the same time and the centre line of chain at tight side is tangent to the pitch circle always. An asymmetrical modification method for the sprocket tooth profile is also proposed. The multi-body dynamic model of timing mechanism in engine with the intake and exhaust sprockets is developed. The fluctuation and meshing impact of chain are analyzed under different rotating speeds. The results show that new developed sprocket profile can efficiently reduce meshing impact and friction of chain. The stability of chain transmission under high speed can be improved.

Dynamic Performance of High-Speed Electric Multiple Unit within Multi-Body System Simulation

2019 ◽  
Vol 12 (4) ◽  
pp. 339-349
Author(s):  
Junguo Wang ◽  
Daoping Gong ◽  
Rui Sun ◽  
Yongxiang Zhao
Keyword(s):  
High Speed ◽  
Rapid Development ◽  
Dynamic Performance ◽  
Body System ◽  
High Speed Railway ◽  
Evaluation Indexes ◽  
Actual Operation ◽  
Multiple Unit ◽  
The Stability ◽  
Multi Body

Background: With the rapid development of the high-speed railway, the dynamic performance such as running stability and safety of the high-speed train is increasingly important. This paper focuses on the dynamic performance of high-speed Electric Multiple Unit (EMU), especially the dynamic characteristics of the bogie frame and car body. Various patents have been discussed in this article. Objective: To develop the Multi-Body System (MBS) model of EMU, verify whether the dynamic performance meets the actual operation requirements, and provide some useful information for dynamics and structural design of the proposed EMU. Methods: According to the technical characteristics of a typical EMU, a MBS model is established via SIMPACK, and the measured data of China high-speed railway is taken as the excitation of track random irregularity. To test the dynamic performance of the EMU, including the stability and safety, some evaluation indexes such as wheel-axle lateral forces, wheel-axle lateral vertical forces, derailment coefficients and wheel unloading rates are also calculated and analyzed in detail. Results: The MBS model of EMU has better dynamic performance especially curving performance, and some evaluation indexes of the stability and safety have also reached China’s high-speed railway standards. Conclusion: The effectiveness of the proposed MBS model is verified, and the dynamic performance of the MBS model can meet the design requirements of high-speed EMU.

scholarly journals Research on Coupled Dynamic Model of Tracked Vehicles and Its Solving Method

2015 ◽  
Vol 2015 ◽  
pp. 1-10
Author(s):  
Yuliang Li ◽  
Chong Tang
Keyword(s):  
Dynamic Performance ◽  
Tractive Force ◽  
Actual Structure ◽  
Discrete Method ◽  
Tracked Vehicles ◽  
Coupled Equations ◽  
Calculation Results ◽  
Dynamic Software ◽  
Multi Body ◽  
Body Dynamic

In order to conveniently analyze the dynamic performance of tracked vehicles, mathematic models are established based on the actual structure of vehicles and terrain mechanics when they are moving on the soft random terrain. A discrete method is adopted to solve the coupled equations to calculate the acceleration of the vehicle’s mass center and tractive force of driving sprocket. Computation results output by the model presented in this paper are compared with results given by the model, which has the same parameters, built in the multi-body dynamic software. It shows that the steady state calculation results are basically consistent, while the model presented in this paper is more convenient to be used in the optimization of structure parameters of tracked vehicles.

A Study on the Method of Vibration Analysis for Korean High Speed Train by the On-Line Test

2006 ◽  
Vol 321-323 ◽  
pp. 1593-1596 ◽  
Author(s):  
Chan Kyoung Park ◽  
Ki Whan Kim ◽  
Jin Yong Mok ◽  
Young Guk Kim ◽  
Seog Won Kim
Keyword(s):  
Vibration Analysis ◽  
High Speed ◽  
Vibration Mode ◽  
Dynamic Performance ◽  
Railway Vehicle ◽  
High Speed Train ◽  
Acceleration Data ◽  
On Line ◽  
System Vibration ◽  
Line Test

The Korean High Speed Train (KHST) has been tested on the Kyongbu high speed line and the Honam conventional line since 2002. A data acquisition system was developed to test and prove the dynamic performance of the KHST, and the system has been found to be very efficient in acquiring multi-channel data from accelerometers located all over the train. Also presented in this paper is an analysis procedure which is simple and efficient in analyzing the acceleration data acquired during the on-line test of the KHST. The understanding of system vibration mode for a railway vehicle is essential to evaluate the characteristics of a dynamic system and to diagnose the dynamic problems of the vehicle system during tests and operations. Methods based on homogeneous linear systems are not realistic because real systems have nonlinear characteristics and are strongly dependent on environmental conditions. In this paper an efficient method of vibration analysis has been proposed and applied for the KHST to evaluate its vibration mode characteristics. The results show that this method is suitable to estimate the system vibration modes of the KHST.

scholarly journals Hydrodynamic Analysis of Self-Propulsion Performance of Wave-Driven Catamaran

2021 ◽  
Vol 9 (11) ◽  
pp. 1221
Author(s):  
Weixin Zhang ◽  
Ye Li ◽  
Yulei Liao ◽  
Qi Jia ◽  
Kaiwen Pan
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Dynamic Model ◽  
Dynamic Structure ◽  
Ocean Waves ◽  
Static State ◽  
Small Surface ◽  
Propulsion Performance ◽  
Multi Body ◽  
Body Dynamic

The wave-driven catamaran is a small surface vehicle driven by ocean waves. It consists of a hull and hydrofoils, and has a multi-body dynamic structure. The process of moving from static state to autonomous navigation driven by ocean waves is called “self-propulsion”, and reflects the ability of the wave-driven catamaran to absorb oceanic wave energy. Considering the importance of the design of the wave-driven catamaran, its self-propulsion performance should be comprehensively analysed. However, the wave-driven catamaran’s multi-body dynamic structure, unpredictable dynamic and kinematic responses driven by waves make it difficult to analyse its self-propulsion performance. In this paper, firstly, a multi-body dynamic model is established for wave-driven catamaran. Secondly, a two-phase numerical flow field containing water and air is established. Thirdly, a numerical simulation method for the self-propulsion process of the wave-driven catamaran is proposed by combining the multi-body dynamic model with a numerical flow field. Through numerical simulation, the hydrodynamic response, including the thrust of the hydrofoils, the resistance of the hull and the sailing velocity of the wave-driven catamaran are identified and comprehensively analysed. Lastly, the accuracy of the numerical simulation results is verified through a self-propulsion test in a towing tank. In contrast with previous research, this method combines multi-body dynamics with computational fluid dynamics (CFD) to avoid errors caused by artificially setting the motion mode of the catamaran, and calculates the real velocity of the catamaran.

scholarly journals Vibration analysis of multi-body dynamic model of combat vehicle gearbox

2019 ◽  
Vol 287 ◽  
pp. 03005
Author(s):  
Jan Furch ◽  
Cao Vu Tran
Keyword(s):  
Dynamic Model ◽  
Vibration Signal ◽  
Technical Condition ◽  
Proposed Model ◽  
Combat Vehicle ◽  
Failure Conditions ◽  
The Individual ◽  
Multi Body ◽  
Material Wear ◽  
Body Dynamic

The combat vehicle gearbox, during the operation, generates vibration signals being related to the technical condition of gearbox. The analysis of the vibration signal could be used to determine accurately the behaviour of gearbox. Along with the development of the computer technology, the multi-body dynamic solution has been used widely to simulate, analyse, and determine the technical condition of gearbox. The purpose of this paper is to introduce the dynamic model of combat vehicle gearbox, and the simulation process based on the multi-body dynamic software, namely MSC.ADAMS. This proposed model allows the detection of failure conditions of individual gears and bearings in the gearbox. In this way, the fault conditions of the individual transmission components are identified. In the future, we would like to include a material wear module in the model, and we would like to model the life of the gearbox. We assume that we would also carry out accelerated tests of the gearbox to verify validity.

Sign in / Sign up

Export Citation Format

Share Document