Study on Electrochemical Impedance Spectrum Analysis of LiFePO4 in Aqueous Solutions by Using Powder Microelectrode

2013 ◽  
Vol 805-806 ◽  
pp. 1348-1351
Author(s):  
Na Ha ◽  
Jie Min Liu
Keyword(s):  
Cathode Materials ◽  
Electrochemical Method ◽  
Electrochemical Impedance ◽  
Lithium Ion ◽  
Impedance Spectrum ◽  
Electrochemical Impedance Spectrum ◽  
Quick Response ◽  
Modeling Process ◽  
Electrochemical Parameters ◽  
Powder Microelectrode

LiFePO4 is becoming promising lithium ion cathode material. Because period of testing call is long, sometimes it cannot accurately characterize for cathode materials. By using Electrochemical Impedance Spectrum, it would be better to describe performance of materials. The electrochemical parameters have been obtained by modeling process of insertion and desertion by Electrochemical Impedance Spectrum, which is helpful to analyze LiFePO4 electrochemical performance. Because of quick response and preciseness of electrochemical method, it would be better to analyze cathode materials.

Research on Lithium Ion Battery Material LiCoO2 for Hybrid Supercapacitor

2011 ◽  
Vol 287-290 ◽  
pp. 1565-1568 ◽  
Author(s):  
Sheng Li Zhang ◽  
Li Hua Ma ◽  
Xiao Gang Li ◽  
Yan Hua Song ◽  
Wei Li
Keyword(s):  
Leakage Current ◽  
Composite Electrode ◽  
Electrochemical Impedance ◽  
Retention Rate ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Impedance Spectrum ◽  
Constant Current ◽  
Electrochemical Impedance Spectrum ◽  
Hybrid Supercapacitor

The electrochemical performance of capacitor was studied with LiCoO2/AC as composite cathode and activated carbon (AC) as anode, in 1.0 mol/L LiPF6/EC+DMC electrolyte. Cyclic Voltammetary, Constant-Current Charge and Discharge, Electrochemical Impedance Spectrum (EIS) and Leakage Current Test were tested to study the characteristics of supercapacitors. The results illustrate that recharging voltage of hybrid supercapacitor can reach to 3.0 V and show good capacitance characteristics. The supercapacitor can rapidly charge and discharge and show good cycling performance. There is a great effect to the performance of the capacitors by adopting different proportional composite electrode. When the ratio of composite electrode is 6:4, we get maximum symmetrical Cyclic Voltammetary and short charge-discharge time only 26.4min; When the ratio is 7:3, the minimum AC impedance of 26.2W can be attained and least leakage current is only 19.92mA/g; When the ratio is 5:5, the best first specific capacity can reach to 70.17F/g but a lower capacity retention rate is 74.86%.

scholarly journals λ-MnO2 Thin Films with Sponge-Like Structures: Synthesis, Characterization and Physiochemical Applications

2021 ◽  
Vol 21 (5) ◽  
pp. 1187
Author(s):  
Khalid Abdelazez Mohamed Ahmed
Keyword(s):  
Thin Films ◽  
Electrochemical Impedance ◽  
Lithium Ion ◽  
Impedance Spectrum ◽  
Particle Growth ◽  
Crystal Form ◽  
Electrochemical Impedance Spectrum ◽  
Significant Research ◽  
Physicochemical Features ◽  
Adsorption Desorption

Manganese dioxide has acquired significant research attentiveness in many fields over the past years because of its exciting physicochemical features. The magnetized λ-MnO2 thin films with sponge-like structures (TSLs) were prepared by hydrothermal-soft chemical and delithiation-lithium manganese process. The XRD, XPS, EDX, FESEM, TEM, HR-TEM, and N2 adsorption-desorption techniques were used to characterize the as-prepared product’s structure composition, morphology, and surface area. The particle growth details of λ-MnO2 are postulated by the oxidation-ionic change-delithiation (OID) mechanism. The electrochemical property was analyzed by galvanostatic discharge-charging, electrochemical impedance spectrum (EIS), and cyclic voltammetry (CV). Special attention of λ-MnO2 S.L.s is given to their applications in the degradation of methyl orange (MO) from wastewater under O2 air bubble pump and cathodic substance in the lithium-ion battery. Due to the peculiarity crystal form and morphology face, the λ-MnO2 TSLs might be promisingly applied in the various physicochemical area.

scholarly journals Study on the Synthesize, Characterization, and Conductive Performance of Nickelzircomolybdnum Heteropoly Acid Salt with Keggin Structure

2019 ◽  
Vol 2019 ◽  
pp. 1-4
Author(s):  
Zhihong Zhang ◽  
Baoying Wang ◽  
Yijing Zhang ◽  
Gehong Zhang ◽  
Yujing Wang
Keyword(s):  
Conduction Mechanism ◽  
Heteropoly Acid ◽  
Electrochemical Impedance ◽  
Impedance Spectrum ◽  
Heteropoly Compound ◽  
Electrochemical Impedance Spectrum ◽  
Acid Salt ◽  
X Ray Diffraction ◽  
Protonic Conduction ◽  
X Ray

A novel heteropoly acid salt, Na6[Ni(Mo11ZrO39)]·20H2O, has been synthesized by the means of acidification and adding the reactants into the solution step by step. The heteropoly compound was characterized by elemental analysis, TGA/DSC, infrared spectrum, ultraviolet spectrum, X-ray diffraction, and SEM. Its protonic conduction was measured by the means of the electrochemical impedance spectrum. The results showed that it belongs to the Keggin type, and its conductivity value was 1.23 × 10–2 S/cm at 23°C when the relative humidity was 60%, and the conductivity enhanced with the elevated temperature. Its proton conduction mechanism was in accordance with vehicle mechanism, and the activation energy was 27.82 kJ/mol.

Fe-Doped UiO-66 Combined with ZnIn2S4 for Adsorption and Degradation of RhB Under Visible Light

NANO ◽  
2020 ◽  
Vol 15 (07) ◽  
pp. 2050089
Author(s):  
Litong Niu ◽  
Shaoping Hu ◽  
Yali Ma ◽  
Mingming Wang ◽  
Bolin Lv ◽  
...  
Keyword(s):  
Visible Light ◽  
Electrochemical Impedance ◽  
Diffuse Reflectance Spectroscopy ◽  
Photogenerated Electron ◽  
Impedance Spectrum ◽  
Solvothermal Reaction ◽  
Electrochemical Impedance Spectrum ◽  
X Ray Diffraction ◽  
One Pot ◽  
Ft Ir

Novel ZnIn2S4/FeUiO-66 (ZFeU) photocatalyst with different proportion of FeUiO-66 has been successfully prepared by a facile one-pot solvothermal reaction. The as-synthesized nanocomposites have been thoroughly characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform-infrared spectroscopy (FT-IR), UV-Vis diffuse reflectance spectroscopy (UV-Vis DRS), Brunauer–Emmett–Teller (BET) characterization, photoluminescence (PL) analysis and electrochemical impedance spectrum (EIS). The photocatalytic performance of ZFeU nanocomposites for the photodegradation of RhB under visible light irradiation was better than that of ZnIn2S4 and FeUiO-66 alone. The experiment results showed the 20% ZFeU nanocomposites had the best photocatalytic properties. At the same time, a probable mechanism was discussed and it was believed that introduction of FeUiO-66 on ZnIn2S4 would minimize the recombination of photogenerated electron-hole pairs, leading to the enhancement of the photocatalytic activity.

EIS Study of Corrosion Behavior of Hot-Dip Galvanized Steel in 5% NaCl Aqueous Solution

2011 ◽  
Vol 335-336 ◽  
pp. 779-782
Author(s):  
Shi Quan He ◽  
Hui Zhong
Keyword(s):  
Aqueous Solution ◽  
Equivalent Circuit ◽  
Corrosion Behavior ◽  
Immersion Time ◽  
Electrochemical Impedance ◽  
Corrosion Behaviour ◽  
Impedance Spectrum ◽  
Corrosion Products ◽  
Galvanized Steel ◽  
Electrochemical Impedance Spectrum

Corrosion behaviour of hot-dip galvanized steel in 5% NaCl aqueous solution was studied by electrochemical impedance spectrum (EIS) technique. The results revealed that corrosion behaviour of hot-dip galvanized steel has a great relationship with immersion time. With the increase of immersion time, corrosion products are constantly changing, and the impedance of corrosion products are different. Parameters fitted by equivalent circuit show that the impedance of corrosion products increased at first, then decreased.

Quantitative Rapid Analysis Method for Ofloxacin in Raw Milk Based on Molecule-Specific Recognition and Electrochemical Impedance Spectrum

2017 ◽  
Vol 60 (5) ◽  
pp. 1439-1443 ◽  
Author(s):  
Guohua Hui ◽  
Yibin Ying
Keyword(s):  
Quantitative Analysis ◽  
Electrochemical Impedance ◽  
Impedance Spectrum ◽  
Raw Milk ◽  
Rapid Analysis ◽  
Electrochemical Impedance Spectrum ◽  
Analysis Method ◽  
Eigen Values ◽  
Sodium Tetraphenylboron ◽  
Association Complex

Abstract. A quantitative rapid analysis method for ofloxacin detection in raw milk using molecule-specific recognition and an electrochemical impedance spectrum (EIS) technique was investigated in this study. An association complex (AC) formed by a combination of ofloxacin and sodium tetraphenylboron (ST) was used as the active material for electrochemical analysis. A carbon screen-printed electrode (CSE) was modified with the AC to form an electrochemical active membrane for ofloxacin detection. EIS data of pretreated raw milk samples were measured and analyzed with a non-linear bistable stochastic resonance (SR) model. Trace ofloxacin concentrations were characterized by SR output signal-to-noise ratio (SNR) eigen values. An ofloxacin quantitative analysis model was built based on SNR eigen values. Experimental results demonstrated that the proposed method presented good accuracy, repeatability, and recovery. It is a promising way for ofloxacin detection in raw milk. Keywords: Association complex, Electrochemical impedance spectrum, Ofloxacin, Quantitative analysis, Sodium tetraphenylboron.

scholarly journals Composition and Performance of Nanostructured Zirconium Titanium Conversion Coating on Aluminum-Magnesium Alloys

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Sheng-xue Yu ◽  
Rui-jun Zhang ◽  
Yong-fu Tang ◽  
Yan-ling Ma ◽  
Wen-chao Du
Keyword(s):  
Corrosion Resistance ◽  
Salt Solution ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Impedance Spectrum ◽  
Conversion Coating ◽  
Mg Alloy ◽  
Electrochemical Impedance Spectrum ◽  
X Ray ◽  
Titanium Salt

Nanostructured conversion coating of Al-Mg alloy was obtained via the surface treatment with zirconium titanium salt solution at 25°C for 10 min. The zirconium titanium salt solution is composed of tannic acid 1.00 g·L−1, K2ZrF60.75 g·L−1, NaF 1.25 g·L−1, MgSO41.0 g/L, and tetra-n-butyl titanate (TBT) 0.08 g·L−1. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectrum (FT-IR) were used to characterize the composition and structure of the obtained conversion coating. The morphology of the conversion coating was obtained by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Results exhibit that the zirconium titanium salt conversion coating of Al-Mg alloy contains Ti, Zr, Al, F, O, Mg, C, Na, and so on. The conversion coating with nm level thickness is smooth, uniform, and compact. Corrosion resistance of conversion coating was evaluated in the 3.5 wt.% NaCl electrolyte through polarization curves and electrochemical impedance spectrum (EIS). Self-corrosion current density on the nanostructured conversion coating of Al-Mg alloy is9.7×10-8A·cm-2, which is only 2% of that on the untreated aluminum-magnesium alloy. This result indicates that the corrosion resistance of the conversion coating is improved markedly after chemical conversion treatment.

PREPARATION AND ELECTROCHEMICAL PERFORMANCE OF HYBRID MATERIALS CONTAINING HETEROPOLY ACID WITH DAWSON STRUCTURE AND POLYMERS

2012 ◽  
Vol 05 (04) ◽  
pp. 1250040 ◽  
Author(s):  
XIA TONG ◽  
WEN WU ◽  
SHENGMING ZHOU ◽  
QINGYIN WU ◽  
FAHE CAO ◽  
...  
Keyword(s):  
Hybrid Materials ◽  
Heteropoly Acid ◽  
Electrochemical Impedance ◽  
Impedance Spectrum ◽  
Xrd Analysis ◽  
Proton Conduction ◽  
Electrochemical Impedance Spectrum ◽  
Grotthuss Mechanism ◽  
Dawson Structure ◽  
Higher Temperature

Highly proton-conducting hybrid materials ( P2W17V /PEG and P2W17V/PEG/SiO2 ) were prepared by heptadecatungstovanadodiphosphoric heteropoly acid with Dawson structure ( P2W17V , 90 wt.%), polyethylene glycol (PEG, 10 wt.% and 5 wt.%) and silica gel ( SiO2 , 0 wt.% and 5 wt.%). The products were characterized by the infrared (IR) spectrum, X-ray powder diffraction (XRD) analysis and electrochemical impedance spectrum (EIS). The result reveals that their conductivity values are 1.02 × 10-2 and 2.58 × 10-2S ⋅ cm-1 at room temperature (26°C) and 75% relative humidity (RH), respectively. Their conductivities increase with higher temperature and these activation energies of proton conduction are 9.51 and 14.95 kJ⋅mol-1, which are lower than that of pure heteropoly acid (32.23 kJ⋅mol-1). These mechanisms of proton conduction for these two materials are Grotthuss mechanism.

Sign in / Sign up

Export Citation Format

Share Document