Design of Control System for the Ball Mill

2014 ◽  
Vol 898 ◽  
pp. 497-500
Author(s):  
Hong She Dang ◽  
Ying Zhang ◽  
Gang Wang
Keyword(s):  
Control System ◽  
Ball Mill ◽  
Mimo System ◽  
Thermal Power ◽  
Electricity Consumption ◽  
Large Power ◽  
Strongly Coupled ◽  
Overall Design ◽  
Wide Range ◽  
Profibus Dp

The Ball Mill System (BMS) is a strongly coupled MIMO system,in order to implement a long-term automatic operation of the BMS effectively,and improve the automation level and efficiency, the paper present the overall design of the system,the control system is composed of Siemens SIMATIC S7-400PLCS7-200PLC,the PROFIBUS DP protocol and MPI protocol are both employed to setup a DCS networking.This control system has been running steadily and efficiently and the operation record showed that a satisfying control result is obtained.InroductionBall mill system is an important link in the modern industrial production,its the main boiler auxiliary equipment.Its work directly affecting the operation of the boiler, the system in the chemical plant, thermal power plant, ore mining and smelting has a wide range of applications, and ball mill system is a large power consumption. The Electricity consumption accounted for factorys power 15%~25%. Safe and economical operation of ball mill system not only directly affects the security and reliability of the generator at the plant and also is the important way of energy saving and consumption reducing[.

The Design of Ball Mill Control System Base on Two-Cell Immune Controller

2011 ◽  
Vol 308-310 ◽  
pp. 1106-1110
Author(s):  
Gui Li Yuan ◽  
Yan Guang Xue
Keyword(s):  
Control System ◽  
Ball Mill ◽  
Dynamic Performance ◽  
Thermal Power ◽  
Engineering Application ◽  
Fast Response ◽  
Control Effect ◽  
Immune Control ◽  
Static Performance ◽  
Mill Control

Currently, Ball Mill is most used coal grinding equipment of pulverizing system of thermal power plant in China. Because of this system is multivariable, strong-coupling and serious time-delay, and it also has nonlinear, time-varying and distributed parameter characteristics. It is naturally difficult to be effective for such kind system to use PID regulation law and design multi-variable system by single-loop. So try more intelligent control for this kind system. Immune Control has fast response and robustness, especially; the Two-cell Immune Control has integration and memory characteristics, and improve the system to better control effect. It is particularly suitable for solving practical engineering application problems with robustness, adaptability and requirements of dynamic performance. So this paper use Two-cell Immune Control for the Ball Mill Control System, and make a large number of simulation experiments about rated parameter, non-rated parameter and adding disturbance situation, it has made a good dynamic and static performance under various conditions. These results confirm the validity of the design of Ball Mill Control System base on Two-cell Immune Controller.

Strongly Coupled Redox-Linked Conformational Switching at the Active Site of the Non-Heme Iron-Dependent Dioxygenase, TauD

2019 ◽  
Author(s):  
Christopher John ◽  
Greg M. Swain ◽  
Robert P. Hausinger ◽  
Denis A. Proshlyakov
Keyword(s):  
Active Site ◽  
Structural Model ◽  
Heme Iron ◽  
Chemical Transformations ◽  
Experimental Conditions ◽  
Strongly Coupled ◽  
Non Heme Iron ◽  
Reversible Redox ◽  
Wide Range ◽  
Complex Structural

2-Oxoglutarate (2OG)-dependent dioxygenases catalyze C-H activation while performing a wide range of chemical transformations. In contrast to their heme analogues, non-heme iron centers afford greater structural flexibility with important implications for their diverse catalytic mechanisms. We characterize an <i>in situ</i> structural model of the putative transient ferric intermediate of 2OG:taurine dioxygenase (TauD) by using a combination of spectroelectrochemical and semi-empirical computational methods, demonstrating that the Fe (III/II) transition involves a substantial, fully reversible, redox-linked conformational change at the active site. This rearrangement alters the apparent redox potential of the active site between -127 mV for reduction of the ferric state and 171 mV for oxidation of the ferrous state of the 2OG-Fe-TauD complex. Structural perturbations exhibit limited sensitivity to mediator concentrations and potential pulse duration. Similar changes were observed in the Fe-TauD and taurine-2OG-Fe-TauD complexes, thus attributing the reorganization to the protein moiety rather than the cosubstrates. Redox difference infrared spectra indicate a reorganization of the protein backbone in addition to the involvement of carboxylate and histidine ligands. Quantitative modeling of the transient redox response using two alternative reaction schemes across a variety of experimental conditions strongly supports the proposal for intrinsic protein reorganization as the origin of the experimental observations.

scholarly journals Quantum information probes of charge fractionalization in large-N gauge theories

2021 ◽  
Vol 2021 (5) ◽  
Author(s):  
Brandon S. DiNunno ◽  
Niko Jokela ◽  
Juan F. Pedraza ◽  
Arttu Pönni
Keyword(s):  
Degrees Of Freedom ◽  
Gauge Theories ◽  
Entanglement Entropy ◽  
Coarse Grained ◽  
Strongly Coupled ◽  
Information Theoretic ◽  
Large N ◽  
Wide Range ◽  
Charge Fractionalization ◽  
Electric Flux

Abstract We study in detail various information theoretic quantities with the intent of distinguishing between different charged sectors in fractionalized states of large-N gauge theories. For concreteness, we focus on a simple holographic (2 + 1)-dimensional strongly coupled electron fluid whose charged states organize themselves into fractionalized and coherent patterns at sufficiently low temperatures. However, we expect that our results are quite generic and applicable to a wide range of systems, including non-holographic. The probes we consider include the entanglement entropy, mutual information, entanglement of purification and the butterfly velocity. The latter turns out to be particularly useful, given the universal connection between momentum and charge diffusion in the vicinity of a black hole horizon. The RT surfaces used to compute the above quantities, though, are largely insensitive to the electric flux in the bulk. To address this deficiency, we propose a generalized entanglement functional that is motivated through the Iyer-Wald formalism, applied to a gravity theory coupled to a U(1) gauge field. We argue that this functional gives rise to a coarse grained measure of entanglement in the boundary theory which is obtained by tracing over (part) of the fractionalized and cohesive charge degrees of freedom. Based on the above, we construct a candidate for an entropic c-function that accounts for the existence of bulk charges. We explore some of its general properties and their significance, and discuss how it can be used to efficiently account for charged degrees of freedom across different energy scales.

scholarly journals Preparation of Synthetic Zeolites from Coal Fly Ash by Hydrothermal Synthesis

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1267
Author(s):  
David Längauer ◽  
Vladimír Čablík ◽  
Slavomír Hredzák ◽  
Anton Zubrik ◽  
Marek Matik ◽  
...  
Keyword(s):  
Fly Ash ◽  
Coal Combustion ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Thermal Power ◽  
Product Analysis ◽  
Coal Combustion Products ◽  
X Ray ◽  
Wide Range ◽  
Silica Alumina

Large amounts of coal combustion products (as solid products of thermal power plants) with different chemical and physical properties cause serious environmental problems. Even though coal fly ash is a coal combustion product, it has a wide range of applications (e.g., in construction, metallurgy, chemical production, reclamation etc.). One of its potential uses is in zeolitization to obtain a higher added value of the product. The aim of this paper is to produce a material with sufficient textural properties used, for example, for environmental purposes (an adsorbent) and/or storage material. In practice, the coal fly ash (No. 1 and No. 2) from Czech power plants was firstly characterized in detail (X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX), particle size measurement, and textural analysis), and then it was hydrothermally treated to synthetize zeolites. Different concentrations of NaOH, LiCl, Al2O3, and aqueous glass; different temperature effects (90–120 °C); and different process lengths (6–48 h) were studied. Furthermore, most of the experiments were supplemented with a crystallization phase that was run for 16 h at 50 °C. After qualitative product analysis (SEM-EDX, XRD, and textural analytics), quantitative XRD evaluation with an internal standard was used for zeolitization process evaluation. Sodalite (SOD), phillipsite (PHI), chabazite (CHA), faujasite-Na (FAU-Na), and faujasite-Ca (FAU-Ca) were obtained as the zeolite phases. The content of these zeolite phases ranged from 2.09 to 43.79%. The best conditions for the zeolite phase formation were as follows: 4 M NaOH, 4 mL 10% LiCl, liquid/solid ratio of 30:1, silica/alumina ratio change from 2:1 to 1:1, temperature of 120 °C, process time of 24 h, and a crystallization phase for 16 h at 50 °C.

A New Flexible Rapid Thermal Processing System

1995 ◽  
Vol 389 ◽  
Author(s):  
K. C. Saraswat ◽  
Y. Chen ◽  
L. Degertekin ◽  
B. T. Khuri-Yakub
Keyword(s):  
Control System ◽  
Real Time ◽  
Processing System ◽  
Process Conditions ◽  
Temperature Uniformity ◽  
Real Time Control ◽  
Wafer Temperature ◽  
Time Control ◽  
Wide Range ◽  
Optical Flux

ABSTRACTA highly flexible Rapid Thermal Multiprocessing (RTM) reactor is described. This flexibility is the result of several new innovations: a lamp system, an acoustic thermometer and a real-time control system. The new lamp has been optimally designed through the use of a “virtual reactor” methodology to obtain the best possible wafer temperature uniformity. It consists of multiple concentric rings composed of light bulbs with horizontal filaments. Each ring is independently and dynamically controlled providing better control over the spatial and temporal optical flux profile resulting in excellent temperature uniformity over a wide range of process conditions. An acoustic thermometer non-invasively allows complete wafer temperature tomography under all process conditions - a critically important measurement never obtained before. For real-time equipment and process control a model based multivariable control system has been developed. Extensive integration of computers and related technology for specification, communication, execution, monitoring, control, and diagnosis demonstrates the programmability of the RTM.

Sign in / Sign up

Export Citation Format

Share Document