Research of Mining Method for Difficult-to-Mine Ore Bodies in Deep Mine

2014 ◽  
Vol 962-965 ◽  
pp. 1041-1046
Author(s):  
Qi Fa Ge ◽  
Xue Sen Sun ◽  
Wei Gen Zhu ◽  
Qing Gang Chen
Keyword(s):  
In Situ Stress ◽  
Mining Method ◽  
Deep Mining ◽  
Deep Mine ◽  
Ore Body ◽  
High In Situ Stress ◽  
Ore Bodies ◽  
Large Panel ◽  
Back Filling

There are many problems such as depth, high in-situ stress, high ground temperature and rockburst proneness etc. in deep mining. And it is an acknowledged and urgent mining technical puzzle about mining method of gently inclined and medium-thick ore bodies. For such an ore body in West wing of Dongguashan copper mine, if we use traditional mining method, it is hard to conquer such difficulties as high in-situ stress, large open area in roof, removal of mined ore by gravity etc. The theory of “large panel and lower sublevel height” will be easy to solve such problems. This paper use numerical technology to analyze and compare the technical and economical effectiveness for different selected mining method and its structure. The sublevel (at a height of 12 m) open stoping with back-filling by extraction in two steps is quite suitable for ensuring safety, increasing efficiency, productivity and reclaiming resource. The selected method is feasible and well worth spread.

scholarly journals Study of the Rock Crack Propagation Induced by Blasting with a Decoupled Charge under High In Situ Stress

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Xudong Li ◽  
Kewei Liu ◽  
Jiacai Yang
Keyword(s):  
Crack Propagation ◽  
Radial Crack ◽  
Maximum Principal Stress ◽  
In Situ Stress ◽  
Crack Evolution ◽  
Deep Mining ◽  
Nonlinear Fracture ◽  
High In Situ Stress ◽  
Initiation And Propagation

The high in situ stress can significantly affect the blast-induced rock fragmentation and cause difficulties in deep mining and civil engineering where the drilling and blasting technique is applied. In this study, the rock crack propagation induced by blasting under in situ stress is first analyzed theoretically, and then a numerical model with a decoupled charge in LS-DYNA is developed to reveal how the initiation and propagation of rock cracks are under high in situ stress. Through simulation, the mechanisms of blast-induced crack evolution under various hydrostatic pressures and nonhydrostatic pressures are investigated, and the differences in crack evolution with specific decoupling coefficients are compared. According to the simulation, three damage zones, i.e., the crushed zone, the nonlinear fracture zone, and the radial crack propagation zone, are formed, and the radial crack evolution is greatly suppressed by the high in situ stress which has no much influence on the crack propagation in the crushed and the nonlinear fracture zones. The velocity of crack propagation is slightly reduced, and the process of crack propagation is stopped early when the rock is subjected to high in situ stress. Furthermore, the numerical analysis indicates that the crack grows preferentially in the direction of maximum principal stress, and the radial crack propagation is predominantly controlled by the preloaded pressure, which is vertical to the crack propagation direction. Based on the numerical results, it is suggested that the optimal decoupling coefficients for rock cracking are 2.65, 1.87, 1.37, and 1.22 for 0, 10, 20, and 30 MPa, respectively. This study provides not only an analysis of the rock crack evolution under high in situ stress but also a reference for resolving excavation difficulties in deep mining.

In Situ Stress Measurement and Inversion in Deep Roadway

2013 ◽  
Vol 734-737 ◽  
pp. 759-763 ◽  
Author(s):  
Yong Li ◽  
Yun Yi Zhang ◽  
Ren Jie Gao ◽  
Shuai Tao Xie
Keyword(s):  
Field Measurement ◽  
Stress Measurement ◽  
Measurement Data ◽  
Back Analysis ◽  
In Situ Stress ◽  
Deep Mine ◽  
Accuracy Requirement ◽  
Initial Stress Field ◽  
In Situ Stress Measurement

Jixi mine area is one of the early mined areas in China and it's a typical deep mine. Because of large deformation of underground roadway and dynamic disasters occurred frequently in this mine, five measurement points of in-situ stress in this mine was measured and then analyzed with inversion. Based on these in-situ stress measurement data, numerical model of 3D in-situ stress back analysis was established. According to different stress fields, related analytical samples of neural network were given with FLAC program. Through the determination of hidden layers, hidden nodes and the setting of parameters, the network was optimized and trained. Then according to field measurement of in-situ stress, back analysis of initial stress field was conducted. Compared with field measurement, with accuracy requirement satisfied, it shows that the in-situ stress of rock mass obtained is basically reasonable. Meanwhile, it proves that the measurement of in-situ stress can provide deep mines with effective and rapid means, and also provide reliable data to optimization of deep roadway layout and supporting design.

Study on Deformation and Damage of Rock Mass Subject to High In Situ Stress by Using a Elastoplastic Damage Model and Considering the Impact of Weak Planes

2013 ◽  
Vol 838-841 ◽  
pp. 705-709
Author(s):  
Yun Hao Yang ◽  
Ren Kun Wang
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Damage Model ◽  
Back Analysis ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
High In Situ Stress ◽  
Underground Caverns ◽  
The Impact

Large scale underground caverns are under construction in high in-situ stress field at Houziyan hydropower station. To investigate deformation and damage of surrounding rock mass, a elastoplastic orthotropic damage model capable of describing induced orthotropic damage and post-peak behavior of hard rock is used, together with a effective approach accounting for the presence of weak planes. Then a displacement based back analysis was conducted by using the measured deformation data from extensometers. The computed displacements are in good agreement with the measured ones at most of measurement points, which confirm the validities of constitutive model and numerical simulation model. The result of simulation shows that damage of surrounding rock mass is mainly dominated by the high in-situ stress rather than the weak planes and heavy damage occur at the cavern shoulders and side walls.

scholarly journals Effect of Advancing Direction of Working Face on Mining Stress Distribution in Deep Coal Mine

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Yuesong Tang ◽  
Wenchao Sun ◽  
Xin Zhang ◽  
Pengju Liu
Keyword(s):  
Stress Distribution ◽  
Large Scale ◽  
In Situ Stress ◽  
Deep Mining ◽  
Deep Coal Mine ◽  
Working Face ◽  
Geological Conditions ◽  
Original Rock ◽  
High Level

Deep mining has become the normal state of coal mining; compared with the mine with shallow buried depth, the consequent high level of in situ stress and complex distribution have brought severe threats to the stability of the stope and the surrounding rock of the roadway. In this research, taking the 121304 working face of Kouzidong Mine as the engineering background, the characteristics of mining-induced stress distribution under complex in situ stress environment in deep mining are analyzed by using on-site measurement of the original rock stress and mining stress, establishing a theoretical model centered on the middle section of the working face, and establishing large-scale numerical calculation models for different advancing directions. It was found that under deep mining conditions, the maximum stress of the original rock is 25.12 MPa, and the direction is vertical. The advanced influence range of mining stress is about 150 m, and the abutment pressure presents a three-peak distribution characteristic in front of the working face. The research results provide important theoretical guiding value for guiding the mining of coal mines with similar geological conditions.

Sign in / Sign up

Export Citation Format

Share Document