Action of Bending Deformation on Electrochemical Properties of Ceramic Coatings on Titanium Implants

Ceramic coatings were synthesized on pure magnesium, binary Mg-Al and Mg-Zn alloys by plasma electrolytic oxidation (PEO) technique, and their mechanical and electrochemical properties were investigated. The coatings showed porous microstructure and some volcano top-like pores on the surface. The coatings on Mg-Al alloys consisted of MgO, MgAl2O4 and Al2O3. In the coatings on Mg-Zn alloys, MgO and ZnO were detected. The hardness and wear resistance showed slight dependence on Al content but no tendency to increase with increasing Zn content. The coated Mg alloys with Al, Zn showed better corrosion resistance in 3.5%NaCl solution but poor corrosion resistance in methyl alcohol, compared to the coated pure Mg.

Download Full-text

Characterization of bioactive ceramic coatings prepared on titanium implants by micro-arc oxidation

Rare Metals ◽

10.1016/s1001-0521(06)60020-x ◽

2006 ◽

Vol 25 (1) ◽

pp. 84-89 ◽

Cited By ~ 5

Author(s):

Y WANG

Keyword(s):

Ceramic Coatings ◽

Titanium Implants ◽

Micro Arc Oxidation ◽

Bioactive Ceramic

Download Full-text

Electron microscopy studies of plasma-sprayed materials

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100074276 ◽

1983 ◽

Vol 41 ◽

pp. 70-71

Author(s):

K.R. Subramanian ◽

A.H. King ◽

H. Herman

Keyword(s):

Plasma Spraying ◽

Substrate Surface ◽

Flame Temperature ◽

Ceramic Coatings ◽

Metallic Substrates ◽

Hot Plasma ◽

Almost All ◽

Plasma Sprayed ◽

Hostile Environments ◽

Plasma Spraying Process

Plasma spraying is a technique which is used to apply coatings to metallic substrates for a variety of purposes, including hardfacing, corrosion resistance and thermal barrier applications. Almost all of the applications of this somewhat esoteric fabrication technique involve materials in hostile environments and the integrity of the coatings is of paramount importance: the effects of process variables on such properties as adhesive strength, cohesive strength and hardness of the substrate/coating system, however, are poorly understood.Briefly, the plasma spraying process involves forming a hot plasma jet with a maximum flame temperature of approximately 20,000K and a gas velocity of about 40m/s. Into this jet the coating material is injected, in powder form, so it is heated and projected at the substrate surface. Relatively thick metallic or ceramic coatings may be speedily built up using this technique.

Download Full-text

Osseointegration interface of calcified bone and endosseous implants

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100130110 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1096-1097

Author(s):

K.E. Krizan ◽

J.E. Laffoon ◽

M.J. Buckley

Keyword(s):

Structure And Function ◽

Titanium Implants ◽

En Bloc ◽

Endosseous Implants ◽

Ultrastructural Studies ◽

The Past ◽

Cacodylate Buffer ◽

One Year ◽

And Function

With increase use of tissue-integrated prostheses in recent years it is a goal to understand what is happening at the interface between haversion bone and bulk metal. This study uses electron microscopy (EM) techniques to establish parameters for osseointegration (structure and function between bone and nonload-carrying implants) in an animal model. In the past the interface has been evaluated extensively with light microscopy methods. Today researchers are using the EM for ultrastructural studies of the bone tissue and implant responses to an in vivo environment. Under general anesthesia nine adult mongrel dogs received three Brånemark (Nobelpharma) 3.75 × 7 mm titanium implants surgical placed in their left zygomatic arch. After a one year healing period the animals were injected with a routine bone marker (oxytetracycline), euthanized and perfused via aortic cannulation with 3% glutaraldehyde in 0.1M cacodylate buffer pH 7.2. Implants were retrieved en bloc, harvest radiographs made (Fig. 1), and routinely embedded in plastic. Tissue and implants were cut into 300 micron thick wafers, longitudinally to the implant with an Isomet saw and diamond wafering blade [Beuhler] until the center of the implant was reached.

Download Full-text

Characterization of thermal barrier coatings formed by electon-beam physical vapor deposition (EB-PVD)

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010015410x ◽

1989 ◽

Vol 47 ◽

pp. 426-427

Author(s):

Ozer Unal

Keyword(s):

Thermal Barrier Coatings ◽

Physical Vapor Deposition ◽

Ceramic Coating ◽

High Vacuum ◽

Ceramic Coatings ◽

High Energy ◽

Thermal Barrier ◽

Protective Oxide ◽

Barrier Coatings ◽

Energy Beam

Interest in ceramics as thermal barrier coatings for hot components of turbine engines has increased rapidly over the last decade. The primary reason for this is the significant reduction in heat load and increased chemical inertness against corrosive species with the ceramic coating materials. Among other candidates, partially-stabilized zirconia is the focus of attention mainly because ot its low thermal conductivity and high thermal expansion coefficient.The coatings were made by Garrett Turbine Engine Company. Ni-base super-alloy was used as the substrate and later a bond-coating with high Al activity was formed over it. The ceramic coatings, with a thickness of about 50 μm, were formed by EB-PVD in a high-vacuum chamber by heating the target material (ZrO2-20 w/0 Y2O3) above its evaporation temperaturef >3500 °C) with a high-energy beam and condensing the resulting vapor onto a rotating heated substrate. A heat treatment in an oxidizing environment was performed later on to form a protective oxide layer to improve the adhesion between the ceramic coating and substrate. Bulk samples were studied by utilizing a Scintag diffractometer and a JEOL JXA-840 SEM; examinations of cross-sectional thin-films of the interface region were performed in a Philips CM 30 TEM operating at 300 kV and for chemical analysis a KEVEX X-ray spectrometer (EDS) was used.

Download Full-text