Research on Rotary Disc-Type MRF Dampers with Nonhomogeneous Magnetic Fields

2008 ◽  
Vol 392-394 ◽  
pp. 497-503 ◽  
Author(s):  
Zhi Cui ◽  
Di Zheng

In this paper, based on the analysis of the damping torque of rotary disc-type magnetorheological fluid (MRF) damper, a new kind of MRF disc-type damper is proposed. The working disc of the new kind of damper has a wedged shape that results in variable working clearances, and hence a nonhomogeneous magnetic field is produced. The magnetic resistance of the MRF filled in the variable clearance is analyzed and the impact of the produced nonhomogeneous magnetic field on the damping torque of the damper is studied. Experiments are conducted and the damper performance under steady shear rate is evaluated with an author-designed test stand. The experimental results show that under the same exciting current and other conditions the output damping torque produced by the MRF of the new kind of damper is much greater than that of the ordinary dampers with parallel disc surfaces and constant working clearance.

2016 ◽  
Vol 28 (12) ◽  
pp. 1614-1626 ◽  
Author(s):  
Wan-Li Song ◽  
Dong-Heng Li ◽  
Yan Tao ◽  
Na Wang ◽  
Shi-Chao Xiu

The aim of this work is to investigate the effect of the small magnetorheological fluid gap on the braking performance of the magnetorheological brake. In this article, theoretical analyses of the output torque are given first, and then the operating principle and design details of the magnetorheological brake whose magnetorheological fluid gap can be altered are presented and discussed. Next, the magnetic circuit of the proposed magnetorheological brake is conducted and further followed by a magnetostatic simulation of the magnetorheological brakes with different sizes of fluid gap. A prototype of the magnetorheological brake is fabricated and a series of tests are carried out to evaluate the braking performance and torque stability, as well as the verification of the simulation results. Experimental results show that the braking torque increases with the increase in the current, and the difference for the impact of the fluid gap on braking performance is huge under different currents. The rules, which the experimental results show, have an important significance on both the improvement of structure design for magnetorheological brake and the investigation of the wear property under different fluid gaps.


2021 ◽  
Vol 105 ◽  
pp. 184-193
Author(s):  
Ilya Aleksandrovich Frolov ◽  
Andrei Aleksandrovich Vorotnikov ◽  
Semyon Viktorovich Bushuev ◽  
Elena Alekseevna Melnichenko ◽  
Yuri Viktorovich Poduraev

Magnetorheological braking devices function due to the organization of domain structures between liquid and solid magnetic materials under the action of an electromagnetic or magnetic field. The disc is most widely used as a rotating braking element that made of a solid magnetic material due to the large area of contact with a magnetorheological fluid. Many factors affect the braking characteristics of the magnetorheological disc brake. Specifically, the value of the magnetic field and how the field is distributed across the work element is significantly affected at the braking torque. There are different ways to generate a magnetic field. In this study, the method of installation of permanent magnets into the construction, allowing to increase the braking torque of the magnetorheological disc brake is proposed. Simulation modelling showing the distribution of the magnetic field across the disk depending on the installation of permanent magnets with different pole orientations were carried out. The model takes into account the possibility of increasing the gap between solid magnetic materials of the structure, inside them which the magnetorheological fluid is placed. Comparative estimation of the distribution of the magnetic fields depending on the chosen method of installation of permanent magnets with different orientations of their poles is carried out. Further research is planned to focus on a comparative assessment of the distribution of magnetic fields depending on the selected material of the braking chamber.


2014 ◽  
Vol 32 (10) ◽  
pp. 1247-1261 ◽  
Author(s):  
L. Turc ◽  
D. Fontaine ◽  
P. Savoini ◽  
E. K. J. Kilpua

Abstract. Magnetic clouds (MCs) are large-scale magnetic flux ropes ejected from the Sun into the interplanetary space. They play a central role in solar–terrestrial relations as they can efficiently drive magnetic activity in the near-Earth environment. Their impact on the Earth's magnetosphere is often attributed to the presence of southward magnetic fields inside the MC, as observed in the upstream solar wind. However, when they arrive in the vicinity of the Earth, MCs first encounter the bow shock, which is expected to modify their properties, including their magnetic field strength and direction. If these changes are significant, they can in turn affect the interaction of the MC with the magnetosphere. In this paper, we use data from the Cluster and Geotail spacecraft inside the magnetosheath and from the Advanced Composition Explorer (ACE) upstream of the Earth's environment to investigate the impact of the bow shock's crossing on the magnetic structure of MCs. Through four example MCs, we show that the evolution of the MC's structure from the solar wind to the magnetosheath differs largely from one event to another. The smooth rotation of the MC can either be preserved inside the magnetosheath, be modified, i.e. the magnetic field still rotates slowly but at different angles, or even disappear. The alteration of the magnetic field orientation across the bow shock can vary with time during the MC's passage and with the location inside the magnetosheath. We examine the conditions encountered at the bow shock from direct observations, when Cluster or Geotail cross it, or indirectly by applying a magnetosheath model. We obtain a good agreement between the observed and modelled magnetic field direction and shock configuration, which varies from quasi-perpendicular to quasi-parallel in our study. We find that the variations in the angle between the magnetic fields in the solar wind and in the magnetosheath are anti-correlated with the variations in the shock obliquity. When the shock is in a quasi-parallel regime, the magnetic field direction varies significantly from the solar wind to the magnetosheath. In such cases, the magnetic field reaching the magnetopause cannot be approximated by the upstream magnetic field. Therefore, it is important to take into account the conditions at the bow shock when estimating the impact of an MC with the Earth's environment because these conditions are crucial in determining the magnetosheath magnetic field, which then interacts with the magnetosphere.


2014 ◽  
Vol 790-791 ◽  
pp. 384-389
Author(s):  
Dirk Räbiger ◽  
Bernd Willers ◽  
Sven Eckert

This paper presents an experimental study which in a first stage is focused on obtaining quantitative information about the isothermal flow field exposed to various magnetic field configurations. Melt stirring has been realized by utilizing a rotating magnetic field. In a second step directional solidification of AlSi7 alloys from a water-cooled copper chill was carried out to verifythe effect of a certain flow field on the solidification process and on the resulting mechanical properties. The solidified structure was reviewed in comparison to an unaffected solidified ingot. Measurements of the phase distribution, the grain size, the hardness and the tensile strength were realized. Our results demonstrate the potential of magnetic fields to control the grain size, the formation of segregation freckles and the mechanical properties. In particular, time–modulated rotating fields show their capability to homogenize both the grain size distribution and the corresponding mechanical properties.


2012 ◽  
Vol 23 (13) ◽  
pp. 1533-1541 ◽  
Author(s):  
Clemens Cepnik ◽  
Eric M Yeatman ◽  
Ulrike Wallrabe

This article discusses how a nonhomogeneous magnetic field with a nonconstant flux gradient affects the behavior of electromagnetic vibration energy harvesters. Based on simulations, the authors show that this nonlinearity enables to increase the output power and bandwidth but not to effectively limit the oscillator vibration amplitude. The impact, however, depends on various system parameters, especially the mechanical damping. Comparing the results to an energy-harvesting prototype, one can conclude that, in practice, the linear model based on a homogeneous magnetic field provides a good estimate. The authors finally give suggestions about magnetic fields that are beneficial for energy harvesting.


2011 ◽  
Vol 391-392 ◽  
pp. 1095-1099
Author(s):  
Lei Chen ◽  
Nan Li ◽  
Feng Chai ◽  
Shu Kang Cheng

NaCl solutions of different concentrations were exposed to alternating and stationary magnetic fields. The conductivity change of the NaCl solutions was measured. The change of the conductivity of the NaCl solutions under different amplitudes magnetic fields was studied. The differences of effect between stationary and alternating magnetic field on the conductivity of the NaCl solutions was compared. The principle of the effects of magnetic fields on conductivity of NaCl solutions was discussed. The process of magnetic moment deflexion effected by the alternating magnetic field was analyzed, which explained the experimental results that the conductivity was increased more larger when then the NaCl solutions were exposing to alternating magnetic field than stationary magnetic field.


2017 ◽  
Vol 19 (2) ◽  
pp. 107-114 ◽  
Author(s):  
Karol Fijałkowski ◽  
Radosław Drozd ◽  
Anna Żywicka ◽  
Adam F. Junka ◽  
Marian Kordas ◽  
...  

Abstract The aim of the present study was to evaluate the impact of a rotating magnetic field (RMF) on cellular and biochemical properties of Gluconacetobacter xylinus during the process of cellulose synthesis by these bacteria. The application of the RMF during bacterial cellulose (BC) production intensified the biochemical processes in G. xylinus as compared to the RMF-unexposed cultures. Moreover, the RMF had a positive impact on the growth of cellulose-producing bacteria. Furthermore, the application of RMF did not increase the number of mutants unable to produce cellulose. In terms of BC production efficacy, the most favorable properties were found in the setting where RMF generator was switched off for the first 72 h of cultivation and switched on for the further 72 h. The results obtained can be used in subsequent studies concerning the optimization of BC production using different types of magnetic fields including RMF, especially.


2021 ◽  
Author(s):  
Jorge Hirsch ◽  
Frank Marsiglio

Abstract The Meissner effect, magnetic field expulsion, is a hallmark of superconductivity. Associated with it, superconductors exclude applied magnetic fields. Recently Minkov et al. presented experimental results reportedly showing ``definitive evidence of the Meissner effect'' in sulfur hydride and lanthanum hydride under high pressure [1]. Instead, we show here that the evidence presented in that paper does not support the case for superconductivity in these materials. Together with experimental evidence discussed in earlier papers, we argue that this clearly indicates that hydrides under pressure are not high temperature superconductors.


2002 ◽  
Vol 206 ◽  
pp. 217-220 ◽  
Author(s):  
Crystal L. Brogan ◽  
Mark J. Claussen ◽  
William M. Goss

Supernovae have a profound effect on the morphology, kinematics, and metallicity of galaxies. The impact of supernova shocks on surrounding molecular clouds is also thought to trigger new generations of star formation. A critical ingredient in such interactions and, indeed, all aspects of supernova remnant (SNR) evolution are magnetic fields. In recent years, OH (1720 MHz) masers have been used as signposts for the interaction of SNRs with molecular gas. In addition to tracing SNR/molecular cloud interactions, the OH (1720 MHz) maser line also provides a unique opportunity to measure the strength of the post-shock magnetic field via Zeeman splitting. Recent results from efforts to both detect the magnetic fields and resolve the maser spot sizes of OH (1720 MHz) masers toward W51C using the VLBA and W44 using MERLIN are presented. These observations have yielded magnetic field detections between 0.5 and 2.5 mG and large maser spot sizes of about 1015 cm.


2017 ◽  
Vol 13 (S336) ◽  
pp. 285-286
Author(s):  
Daria Dall’Olio ◽  
W. H. T. Vlemmings ◽  
G. Surcis ◽  
H. Beuther ◽  
B. Lankhaar ◽  
...  

AbstractTheoretical simulations have shown that magnetic fields play an important role in massive star formation: they can suppress fragmentation in the star forming cloud, enhance accretion via disc and regulate outflows and jets. However, models require specific magnetic configurations and need more observational constraints to properly test the impact of magnetic fields. We investigate the magnetic field structure of the massive protostar IRAS18089-1732, analysing 6.7 GHz CH3OH maser MERLIN observations. IRAS18089-1732 is a well studied high mass protostar, showing a hot core chemistry, an accretion disc and a bipolar outflow. An ordered magnetic field oriented around its disc has been detected from previous observations of polarised dust. This gives us the chance to investigate how the magnetic field at the small scale probed by masers relates to the large scale field probed by the dust.


Sign in / Sign up

Export Citation Format

Share Document