Effects of Sm3+ Doping on the Photoluminescence Properties of Ca9Eu1-xSmx(VO4)7 Red-Emitting Phosphors

2012 ◽  
Vol 512-515 ◽  
pp. 1488-1493 ◽  
Author(s):  
Li Hong Liu ◽  
Rong Jun Xie ◽  
Xu Dong Sun ◽  
Qing Huang ◽  
Naoto Hirosaki
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Excitation Energy ◽  
Solid State Reaction ◽  
Emission Intensity ◽  
Solid State Reaction Method ◽  
Photoluminescence Properties ◽  
Reaction Method ◽  
White Leds ◽  
Uv Led

This paper reports the photoluminescence properties of Ca9Eu1-xSmx(VO4)7 (x=0.2-0.4) synthesized at 1250 oC in air for 12 h using traditional solid-state reaction method. With the increase of Sm3+ substitution amount, purity Ca9Eu1-xSmx(VO4)7 phase was obtained even when the Eu3+ ions were totally substituted by Sm3+. The experimental results showed that when Sm3+ was codoped with Eu3+ into Ca9Eu1-xSmx(VO4)7 crystal structure, Sm3+ would act as a sensitizer and transfer the excitation energy to Eu3+ ions and finally enhance the emission intensity of Ca9Eu1-xSmx(VO4)7 under 405 nm excitation, which leads to more favorite of this kind of phosphor used in UV LED based white LEDs.

The Morphologies and Photoluminescence of Ce3+-Doped 0.5La2O3-2SrO-0.5Al2O3 Phosphors with SrF2

2016 ◽  
Vol 680 ◽  
pp. 228-232
Author(s):  
Xi Guang Gu ◽  
Ren Li Fu ◽  
Ye Tang ◽  
Fang Yang
Keyword(s):  
Solid State ◽  
White Light ◽  
Solid State Reaction ◽  
Emission Intensity ◽  
Solid State Reaction Method ◽  
Conventional Solid State Reaction ◽  
Light Emitting ◽  
Reaction Method ◽  
Reducing Atmosphere ◽  
White Light Emitting Diodes

Ce3+-doped 0.5La2O3-2SrO-0.5Al2O3 (LSA:Ce) phosphors had been successfully synthesized using a conventional solid-state reaction method under reducing atmosphere (H2/N2 =1/5). The phase, morphologies and luminescence properties of the LSA:Ce phosphors were investigated. The emission intensity of LSA:Ce phosphors was improved by the addition of SrF2 as flux, and red shift of PL spectra peak was observed in this phosphors. Research results shown that the LSA:Ce phosphors have the potential to meet the development of white light-emitting diodes.

Synthesis, photoluminescence and Judd–Ofelt analysis of red LiGd5P2O13 : Eu3+ phosphors for white LEDs

RSC Advances ◽  
2015 ◽  
Vol 5 (67) ◽  
pp. 54622-54628 ◽  
Author(s):  
Xinguo Zhang ◽  
Liya Zhou ◽  
Qi Pang ◽  
Menglian Gong
Keyword(s):  
Thermal Stability ◽  
Solid State ◽  
Quantum Yield ◽  
Solid State Reaction ◽  
Red Light ◽  
Solid State Reaction Method ◽  
Reaction Method ◽  
White Leds ◽  
Good Thermal Stability ◽  
Red Phosphors

LiGd5P2O13 : Eu3+ red phosphors were prepared by solid-state reaction method. Phosphors could be efficiently excited by NUV/blue light and emit pure-red light. LiGd5P2O13 : Eu3+ shows good thermal stability with quantum yield of 46.5%.

Thermal enhancement of 2H11/2→4I15/2 up-conversion luminescence of Er3+ doped K2Yb(PO4)(MoO4) phosphors

2021 ◽  
Author(s):  
Hongqiang Cui ◽  
Yongze Cao ◽  
Lei Zhang ◽  
Yuhang Zhang ◽  
Siying Ran ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Solid State Reaction ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Orthorhombic Crystal ◽  
Orthorhombic Crystal Structure ◽  
Reaction Method ◽  
X Ray ◽  
Thermal Enhancement

Er3+ with different concentrations doped K2Yb(PO4)(MoO4) phosphors were prepared by a solid-state reaction method, and the layered orthorhombic crystal structure of the samples was confirmed by X-ray diffraction (XRD). Under...

scholarly journals Phonon characteristics, crystal structure, and intrinsic properties of a Y(Mg1/2Sn1/2)O3 ceramic

RSC Advances ◽  
2017 ◽  
Vol 7 (56) ◽  
pp. 35305-35310 ◽  
Author(s):  
Chao Xing ◽  
Jianzhu Li ◽  
Huiling Chen ◽  
Hengyang Qiao ◽  
Jun Yang ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Solid State Reaction ◽  
Solid State Reaction Method ◽  
Intrinsic Properties ◽  
Conventional Solid State Reaction ◽  
Reaction Method

Herein, a Y(Mg1/2Sn1/2)O3 (YMS) ceramic was synthesized using a conventional solid-state reaction method.

Effect of B2O3 or SiO2 Fluxes on Morphology and Size of Pr-Doped CaTiO3 Phosphor Particles and on their Photoluminescence Properties

2011 ◽  
Vol 497 ◽  
pp. 31-37 ◽  
Author(s):  
Toru Kyomen ◽  
Ryuta Motani ◽  
Minoru Hanaya
Keyword(s):  
Solid State ◽  
Solid State Reaction ◽  
Primary Particle ◽  
Solid State Reaction Method ◽  
Particle Sizes ◽  
Photoluminescence Properties ◽  
Conventional Solid State Reaction ◽  
Red Phosphor ◽  
Reaction Method ◽  
Primary Particles

Powder of Pr-doped CaTiO3 red phosphor was prepared at 1473 K by a conventional solid-state reaction method with addition of B2O3 or SiO2 as a flux. Primary particle sizes of the prepared samples were increased by using B2O3 flux but decreased by using SiO2 flux. Clear planes, edges, or steps were observed on surfaces of the primary particles. The intensity of photoluminescence induced by irradiation of light with a wavelength longer than ∼350 nm was enhanced about three times by using B2O3 flux. The intensity of photoluminescence induced by irradiation of light with a wavelength shorter than ∼350 nm was enhanced about twice by using either B2O3 or SiO2 fluxes. The origin for the flux effects is discussed.

Effects of Various Fluxes on Synthesis of Deep Red Emitting CaAl12O19:Mn4+ Phosphors

2016 ◽  
Vol 852 ◽  
pp. 454-460 ◽  
Author(s):  
Qiu Hong Zhang ◽  
Hai Yong Ni ◽  
Ling Li Wang ◽  
Fang Ming Xiao
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Solid State Reaction ◽  
Single Phase ◽  
Luminescent Properties ◽  
Solid State Reaction Method ◽  
Luminescent Intensity ◽  
Reaction Method ◽  
Structure Morphology ◽  
Forming Temperature

Deep red emitting CaAl12-xO19:xMn4+ phosphors were synthesized by solid state reaction method. Various fluxes (BaF2, H3BO3, Na2CO3 and NH4Cl) were added in preparation of the phosphors. The influences of the various fluxes on the crystal structure, morphology and luminescent properties of CaAl12O19:Mn4+ phosphors were studied. The results show that the obtained phosphors with fluxes possessed better luminescent intensity than that of the phosphors without fluxes. The maximum luminescent intensities were found with the following order: H3BO3 (2.0 wt%) > Na2CO3 (0.5 wt%) > NH4Cl (0.3 wt%) > BaF2 (0.1 wt%) > no flux. The H3BO3 flux can decrease the single phase forming temperature of CaAl12O19:Mn4+ phosphors by about 150°C.

Sign in / Sign up

Export Citation Format

Share Document