Effect of Hot Water Environment on Tensile Fracture Properties of Carbon Fiber Reinforced Polyoxamide Composites

2014 ◽  
Vol 627 ◽  
pp. 177-180
Author(s):  
Kazuto Tanaka ◽  
Shunsuke Maehata ◽  
Tsutao Katayama ◽  
Masahiro Shinohara
Keyword(s):  
Carbon Fiber ◽  
Water Environment ◽  
Polyamide 6 ◽  
Hot Water ◽  
Tensile Fracture ◽  
Fiber Reinforced ◽  
Fracture Properties ◽  
Properties Of Materials ◽  
Carbon Fiber Reinforced ◽  
Reinforced Thermoplastics

Matrices for carbon fiber reinforced thermoplastics are appropriate to use comparatively cheaper resins such as polyamide. However polyamide 6 is highly hygroscopic and the mechanical properties of materials are reported to be degraded by water absorption. Polyoxamide (PX) has been developed as polyamide resins with low hygroscopicity. In this study, the effect of hot water environment on the tensile fracture properties of carbon fiber/polyoxamide composites has been clarified.

scholarly journals Application of Glass Fiber and Carbon Fiber-Reinforced Thermoplastics in Face Guards

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 18
Author(s):  
Takahiro Wada ◽  
Hiroshi Churei ◽  
Mako Yokose ◽  
Naohiko Iwasaki ◽  
Hidekazu Takahashi ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Glass Fiber ◽  
Impact Testing ◽  
Fiber Reinforced ◽  
Shock Absorption ◽  
Glass Fiber Reinforced ◽  
Field Of Vision ◽  
Commercial Glass ◽  
Carbon Fiber Reinforced ◽  
Reinforced Thermoplastics

Face guards (FGs) are protectors that allow for the rapid and safe return of athletes who are to play after sustaining traumatic facial injuries and orbital fractures. Current FGs require significant thickness to achieve sufficient shock absorption abilities. However, their weight and thickness render the FGs uncomfortable and reduce the field of vision of the athlete, thus hindering their performance. Therefore, thin and lightweight FGs are required. We fabricated FGs using commercial glass fiber-reinforced thermoplastic (GFRTP) and carbon fiber-reinforced thermoplastic (CFRTP) resins to achieve these requirements and investigated their shock absorption abilities through impact testing. The results showed that an FG composed of CFRTP is thinner and lighter than a conventional FG and has sufficient shock absorption ability. The fabrication method of an FG comprising CFRTP is similar to the conventional method. FGs composed of commercial FRTPs exhibit adequate shock absorption abilities and are thinner and lower in weight as compared to conventional FGs.

Improvement of the electrical conductivity of carbon fiber reinforced polymer by incorporation of nanofillers and the resulting thermal and mechanical behavior

2017 ◽  
Vol 52 (11) ◽  
pp. 1495-1503 ◽  
Author(s):  
K Hamdi ◽  
Z Aboura ◽  
W Harizi ◽  
K Khellil
Keyword(s):  
Electrical Conductivity ◽  
Carbon Fiber ◽  
Carbon Black ◽  
Electrical Current ◽  
Polyamide 6 ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

This work tends to characterize the effect of carbon black nanofillers on the properties of the woven carbon fiber reinforced thermoplastic polymers. First of all, composites from nanofilled Polyamide 6 resin reinforced by carbon fibers were fabricated. Scanning electron microscopy observations were performed to localize the nanoparticles and showed that particles penetrated the fiber zone. In fact, by reaching this zone, the carbon black nanofillers create a connectivity's network between fibers, which produces an easy pathway for the electrical current. It explains the noticed improvement of the electrical conductivity of the carbon black nanofilled composites. Electrical conductivity of neat matrix composite passed from 20 to 80 S/cm by adding 8 wt% of carbon black and to 140 S/cm by adding 16 wt% of the same nanofiller. The addition of nanofillers modifies the heating and cooling laws of carbon fiber reinforced polymer: the nanofilled carbon fiber reinforced polymer with 16 wt% is the most conductive so it heats less. Based on these results, the use of the composite itself as an indicator of this mechanical state might be possible. In fact, the study of the influence of a mechanical loading on the electrical properties of the composite by recording the variance of an electrical set is possible.

Sign in / Sign up

Export Citation Format

Share Document