Physical-Chemical Studies of the Process of Condensation of a Clinker-Free Binder

2022 ◽  
Vol 906 ◽  
pp. 47-52
Author(s):  
Maria Badalyan ◽  
Amalya Karapetyan ◽  
Hovsep Hoveyan

The possibility of using a clinker-free binder as an alternative to expensive and energy-intensive Portland cement is being considered. The pozzolanizing effect of volcanic rocks is presented, where along with the binding of calcium hydroxide by silica to hydrosilicates, the binding of calcium hydroxide by “free” alumina to hydroaluminates also takes place. In the process of hardening of the clinker-free binder, the phase mineralogical composition of the formed new formations differs from the new formations that are synthesized during hardening of traditional Portland cement, which explains the difference in their properties. The new formations that are formed during the hardening process of clinker-free cements are mainly low-basic hydrosilicates, and alkaline aluminosilicates give the cast-in-place stone water resistance, frost resistance, waterproofing, etc., in a word, durability. Physical and chemical studies of the hardening process of clinker-free lime-igneous cements have been carried out, which indicates the possibility of replacing the energy-intensive Portland cement with cheaper clinker-free cement.

2021 ◽  
pp. 16-21

The purpose of this study is study of the physical and chemical properties of the overburden of the Dzherdanak deposit. The chemical and mineralogical composition of the overburden of the Djerdanak deposit has been studied by the methods of X-ray and thermography, electron microscopy and infrared spectroscopy. The main phases are quartz, kaolinite and muscovite. The study of the fine structure of the rock under an electron microscope showed the homogeneity of the rock with pronounced uniform inclusions, which is preserved even after firing. Changes in the rock after firing at 1050 °C have been determined. The formation of mullite at this temperature has been established.


Author(s):  
O. V. Dem'yanenko ◽  
N. O. Kopanitsa ◽  
Yu. S. Sarkisov ◽  
N. P. Gorlenko

The paper presents the results of physical and chemical studies of hardening products in the cement-complex additive-water system. The choice of the modifying additive is based on the structural and chemical affinity of the additive fragments with cement, which includes highly dispersed Tarkosil Ts-38 microsilica and MT-600 peat additive. The synergistic effect of the complex additive leads to a significant improvement in the performance characteristics of hydrated cement: strength, frost resistance, water resistance, and others. Physicochemical analysis shows that the introduction of the complex additive increases the density of hydrated cement due to the formation of low-basic hydrated silicates and their kinds, such as afwillite, foshagite, and truscottite.


1991 ◽  
Vol 245 ◽  
Author(s):  
John Herrick ◽  
Karen L. Scrivener ◽  
Peter L. Pratt

ABSTRACTUsing backscattered electron images, it is shown that an expansive clinker is polymineralic in nature, with individual particles containing the constituents (lime, anhydrite and anhydrous calcium sulphoaluminate) to form ettringite on hydration. The hydration reaction with time of a simple paste of a mixture of this expansive clinker with Ordinary Portland Cement (OPC) has been monitored using backscattered electron images, and the formation of ettringite and a change in the morphology of the calcium hydroxide formed from the added free lime from the expansive clinker is observed. Thermal analysis studies on pastes of the pure expansive clinker have confirmed this apparent change in morphology.


1965 ◽  
Vol 240 (5) ◽  
pp. 1974-1978 ◽  
Author(s):  
Philip Aisen ◽  
Anatol G. Morell

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 660
Author(s):  
Qingqing Liu ◽  
Di Gao ◽  
Wei Xu

According to the old surface coating process of European and American furniture, the surface of modified poplar is first differentiated pre-treatment, and then the bottom color modification and material color modification are respectively applied to the modified poplar after the surface differentiation treatment. The visual physical quantity and physical and chemical properties were measured and compared with mahogany, which is commonly used in old furniture in Europe and America to explore the effect of colorants and coloring steps, as well as different surface pretreatments on the coloring effect. Finally, it is concluded that continuous coloring operations can narrow the difference in brightness and red color value in the coloring layer of modified poplar and mahogany. Continuous coloring operations increase the difference between the yellow-green color values of modified poplar and mahogany. Therefore, the coloring difference between modified poplar and mahogany was affected by the colorant and coloring steps. Through color accumulation, the gap between the two in the target color coloring effect can be reduced, thereby reducing the difference between the coloring effect of modified poplar and mahogany.


1959 ◽  
Vol 234 (6) ◽  
pp. 1447-1451
Author(s):  
Leon W. Cunningham ◽  
B. Joanne Nuenke

1969 ◽  
Vol 244 (13) ◽  
pp. 3494-3496 ◽  
Author(s):  
A G Morell ◽  
C J A Van Den Hamer ◽  
I H Scheinberg

Sign in / Sign up

Export Citation Format

Share Document