Temperature Dependent Carrier Transport in Hydrogenated Amorphous Semiconductors for Thin Film Memristive Applications

2022 ◽  
Vol 1048 ◽  
pp. 182-188
Author(s):  
Mayank Chakraverty ◽  
V.N. Ramakrishnan
Keyword(s):  
Amorphous Silicon ◽  
Amorphous Materials ◽  
Carrier Transport ◽  
Hole Concentration ◽  
Hydrogenated Amorphous Silicon ◽  
Amorphous Semiconductors ◽  
Effect Of Temperature ◽  
Temperature Dependent ◽  
Different Temperatures ◽  
Hydrogenated Amorphous

This paper demonstrates the transport of electron and hole carriers in two distinct hydrogenated amorphous semiconductor materials at different temperatures. Compared to crystalline materials, the amorphous semiconductors differ structurally, optically and electrically, hence the nature of carrier transport through such amorphous materials differ. Materials like hydrogenated amorphous silicon and amorphous IGZO have been used for the study of temperature dependent carrier transport in this paper. Simulation results have been presented to show the variation of free electron and hole concentration, trapped electron and hole concentration with energy at 300K for both the materials. The change in mobility with a change in the Fermi level has been plotted for different temperatures. The effect of temperature on Brownian motion mobility of electrons and holes in hydrogenated amorphous silicon and amorphous IGZO has been demonstrated towards the end of this paper.

Fast light-induced change in ellipsometry spectra of hydrogenated amorphous silicon measured through a transparent substrate upon bias light illumination

2001 ◽  
Vol 664 ◽  
Author(s):  
N. Hata ◽  
C. M. Fortmann ◽  
A. Matsuda
Keyword(s):  
Amorphous Silicon ◽  
Hydrogenated Amorphous Silicon ◽  
Light Illumination ◽  
Temperature Dependent ◽  
Transparent Substrate ◽  
Optical Effects ◽  
The Stability ◽  
Fast Light ◽  
First Time ◽  
Hydrogenated Amorphous

ABSTRACTPrevious ellipsometric studies of the stability of amorphous silicon (a-Si:H) found reversible changes in the pseudo-dielectric functions. These changes were slow to generate and slow to anneal away. These slow changes are associated with a dangling bond related structural change. Since any light-induced change in the dielectric function is useful for photonic engineering, we undertook the present more detailed study of light induced optical effects in a-Si:H. The optical pseudo-dielectric functions of hydrogenated amorphous silicon (a-Si:H) were measured using spectroscopic ellipsometry (SE) and the “through-the-substrate” measurement technique as a function of measurement temperature and bias light illumination. For the first time we report a light-induced change in a-Si:H materials that is fast, bias-light-dependent, reversible, and temperature dependent. This effect, while not completely understood, offers exciting new prospects for photonic engineering.

scholarly journals Photoluminescent Properties of Hydrogenated Amorphous Silicon Oxide Powders

2002 ◽  
Vol 17 (5) ◽  
pp. 977-980 ◽  
Author(s):  
Wei-Fang Su ◽  
Hong-Ru Guo
Keyword(s):  
Amorphous Silicon ◽  
Silicon Oxide ◽  
Hydrogenated Amorphous Silicon ◽  
Thermal Quenching ◽  
Amorphous Semiconductors ◽  
Electronic Density ◽  
Quenching Effect ◽  
Oxide Powders ◽  
Amorphous Silicon Oxide ◽  
Hydrogenated Amorphous

The photoluminescence properties of hydrogenated amorphous silicon oxide powder SiO0.92H0.53 were investigated. The powder was prepared by reacting lithium with trichlorosilane in tetrahydrofuran. The luminescence peak energy was located between 1.0 and 1.61 eV. The samples were treated under different conditions such as annealing, hydrolysis, and hydrolysis plus HF etching. The changes of the photoluminescent intensity and location on the treated powders can be explained by the electronic density of state model of amorphous semiconductors. The temperature dependence of luminescence properties of the powders can be described by the relationship of thermal quenching effect: ln[Io/I(T) – 1] = ED/Eo = T/To at temperatures between 100 and 300 K.

Low Temperature Characteristics of Hydrogenated Amorphous Silicon Field Effect Transistors

1989 ◽  
Vol 149 ◽  
Author(s):  
Byung-Seong Bae ◽  
Deok-Ho Cho ◽  
Jae-Hee Lee ◽  
Choochon Lee ◽  
Jin Jang
Keyword(s):  
Low Temperature ◽  
Amorphous Silicon ◽  
Threshold Voltage ◽  
Field Effect ◽  
Field Effect Transistors ◽  
Hydrogenated Amorphous Silicon ◽  
Field Effect Mobility ◽  
Temperature Dependent ◽  
Hydrogenated Amorphous ◽  
Very Low Temperature

ABSTRACTWe investigated the temperature dependent characteristics of hydrogenated amorphous silicon (a-Si:H) thin film transistors (TFT's) at temperatures down to 20 K. With decreasing temperature, the threshold voltage increased, the field effect mobility and the on-current decreased. The measured on-currents versus inverse temperature above 80 K are represented as the sum of two exponentially varied currents. It is concluded that on-current is nearest-neighbour hopping between 120 K and 80 K. Below this temperature, the temperature dependence of on-current is explained by variable range hopping and below about 30 K on-current becomes nearly independent of temperature. At very low temperature hopping probability may be governed not by temperature but by temperature independent tunneling, depending on the overlap of the wave function. The explanation of threshold voltage increase at low temperature is given.

Hydrogenated amorphous silicon carbon nitride films prepared by PECVD technology: properties

2012 ◽  
Vol 63 (5) ◽  
pp. 333-335 ◽  
Author(s):  
Jozef Huran ◽  
Albín Valovič ◽  
Michal Kučera ◽  
Angela Kleinová ◽  
Eva Kovačcová ◽  
...  
Keyword(s):  
Amorphous Silicon ◽  
Amorphous Materials ◽  
Carbon Nitride ◽  
Hydrogenated Amorphous Silicon ◽  
Electrical Characterization ◽  
Chemical Vapor ◽  
Silicon Carbon ◽  
Two Peaks ◽  
Hydrogenated Amorphous ◽  
Silicon Carbon Nitride

Hydrogenated amorphous silicon carbon nitride films were grown by plasma enhanced chemical vapor deposition (PECVD) technique. The flow rates of SiH4 , CH4 and NH3 gases were 6 sccm, 30 sccm and 8 sccm, respectively. The deposition temperatures were 350, 400 and 450 ◦C. The RBS and ERD results showed that the concentrations of Si, C, N and H are practically the same in the films deposited at substrate temperatures in the range 350-450 ◦C. In photoluminescence spectra we identified two peaks and assigned them to radiative transitions typical for amorphous materials, ie band to band and defect-related ones. The electrical characterization consists of I(V ) measurement in sandwich configuration for voltages up to 100 V. From electrical characterization, it was found that with increased deposition temperature the resistivity of the amorphous SiCN film was reduced.

Sign in / Sign up

Export Citation Format

Share Document