A Study on the Preparation of TiO2-xNx Films by Reactive Deposition and Their Absorption Properties in Visible Region

2005 ◽  
Vol 475-479 ◽  
pp. 1223-1226 ◽  
Author(s):  
Ming Zhao ◽  
Da Ming Zhuang ◽  
Gong Zhang ◽  
Ling Fang ◽  
Min Sheng Wu

The nitrogen-doped TiO2 thin films were prepared by mid-frequency alternative reactive magnetron sputtering technique. The N concentration of the nitrogen-doped TiO2 thin films was analyzed by XPS. And the absorption spectra of the films in ultraviolet and visible region were also investigated. The results show that the mid-frequency alternative reactive magnetron sputtering technique is a convenient method for growing TiO2-xNx. Annealing the nitrogen-doped TiO2 thin film in nitrogen atmosphere under 380°C is helpful for increase the concentration of nitrogen in the film, but the ratio of N2 in reactive gas is mainly influence the concentration of nitrogen in the Ti-N bond in the TiO2 film. The increase of the thickness of nitrogen-doped TiO2 films will enhance the absorbability of the film in the ultraviolet and visible region. The wavelength of the absorption edge of TiO2-xNx film with 1.5% nitrogen shift to 441nm from 387nm, which is the absorption edge for undoped TiO2 films.

2007 ◽  
Vol 124-126 ◽  
pp. 999-1002 ◽  
Author(s):  
Han Na Cho ◽  
Jang Woo Lee ◽  
Su Ryun Min ◽  
Chee Won Chung

Indium zinc oxide (IZO) thin films were deposited on a glass substrate by radio frequency (rf) reactive magnetron sputtering method. As the rf power increased, the deposition rate and resistivity increased while the optical transmittance decreased owing to the increase of grain size. With increasing gas pressure, the resistivity increased and the transmittance decreased. Atomic force microscopy and scanning electron microscopy were employed to observe the film surface. The IZO films displayed a resistivity of 3.8 × 10-4 Ω cm and a transmittance of about 90% in visible region.


Sign in / Sign up

Export Citation Format

Share Document