Tailoring Microstructures and Mechanical Properties of AlCoCrFeNiTi0.3 High-Entropy Alloys by Heat Treatment

2013 ◽  
Vol 745-746 ◽  
pp. 768-774 ◽  
Author(s):  
Jun Wei Qiao ◽  
Y.F. Wang ◽  
R.Q. Wang ◽  
J.Y. Shi ◽  
S.B. Sang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Volume Fraction ◽  
Treatment Temperature ◽  
High Entropy Alloys ◽  
Static Compression ◽  
High Entropy ◽  
Bcc Structure ◽  
Microstructures And Mechanical Properties ◽  
Quasi Static Compression

The microstructures and mechanical properties of AlCoCrFeNi0.3 high-entropy alloys (HEAs) are tailored through heat treatment. During heat treatment, the dendrite phase with a body-centered-cubic (bcc) structure transformed into the interdendrite phase with a bcc structure. Due to the element accumulation with higher hardness in the interdendrites and the increase of volume fraction of interdendrites, the average hardness of AlCoCrFeNi0.3 HEAs increased with the heat-treatment temperature, and the highest hardness was 625 HV. After 500 heat treatment, the optimized mechanical properties under quasi-static compression were achieved, and the yielding strength and fracture plasticity were 2.30 GPa and 9 %, respectively. Upon dynamic loading, the mechanical properties of HEAs were greatly enhanced.

scholarly journals Investigation on the Thermal Behavior, Mechanical Properties and Reaction Characteristics of Al-PTFE Composites Enhanced by Ni Particle

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1741 ◽  
Author(s):  
Jiaxiang Wu ◽  
Huaixi Wang ◽  
Xiang Fang ◽  
Yuchun Li ◽  
Yiming Mao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Energy Density ◽  
Thermal Behavior ◽  
Volume Fraction ◽  
Damage Effect ◽  
Static Compression ◽  
Hardening Modulus ◽  
Reaction Characteristics ◽  
Ptfe Composites ◽  
Quasi Static Compression

Al-PTFE (aluminum-polytetrafluoroethene) is regarded as one of the most promising reactive materials (RMs). In this work, Ni (Nickel) was added to Al-PTFE composites for the purpose of improving the energy density and damage effect. To investigate the thermal behavior, mechanical properties and reaction characteristics of the Al-Ni-PTFE composites, an Al-PTFE mixture and an Al-Ni mixture were prepared by ultrasonic mixing. Six types of Al-Ni-PTFE specimens with different component mass ratios were prepared by molding sintering. Simultaneous thermal analysis experiments were carried out to characterize the thermal behavior of the Al-PTFE mixture and the Al-Ni mixture. Quasi-static compression tests were performed to analyze the mechanical properties and reaction characteristics of the Al-Ni-PTFE specimens. The results indicate that the reaction onset temperature of Al-Ni (582.7 °C) was similar to that of Al-PTFE (587.6 °C) and that the reaction heat of Al-Ni (991.9 J/g) was 12.5 times higher than that of Al-PTFE (79.6 J/g). With the increase of Ni content, the material changed from ductile to brittle and the strain hardening modulus and compressive strength rose first and then subsequently decreased, reaching a maximum of 51.35 MPa and 111.41 MPa respectively when the volume fraction of Ni was 10%. An exothermic reaction occurred for the specimens with a Ni volume fraction no more than 10% under quasi-static compression, accompanied by the formation of Ni-Al intermetallic compounds. In the Al-Ni-PTFE system, the reaction between Al and PTFE preceded the reaction between Al and Ni and the feasibility of increasing the energy density and damage effect of the Al-Ni-PTFE reactive material by means of Ni-Al reaction was proved.

scholarly journals From High-Manganese Steels to Advanced High-Entropy Alloys

Metals ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 726 ◽  
Author(s):  
Christian Haase ◽  
Luis Antonio Barrales-Mora
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Structural Material ◽  
High Entropy Alloys ◽  
High Manganese ◽  
High Entropy ◽  
Design Concepts ◽  
Physical Mechanisms ◽  
High Manganese Steels ◽  
Manganese Steels

Arguably, steels are the most important structural material, even to this day. Numerous design concepts have been developed to create and/or tailor new steels suited to the most varied applications. High-manganese steels (HMnS) stand out for their excellent mechanical properties and their capacity to make use of a variety of physical mechanisms to tailor their microstructure, and thus their properties. With this in mind, in this contribution, we explore the possibility of extending the alloy design concepts that haven been used successfully in HMnS to the recently introduced high-entropy alloys (HEA). To this aim, one HMnS steel and the classical HEA Cantor alloy were subjected to cold rolling and heat treatment. The evolution of the microstructure and texture during the processing of the alloys and the resulting properties were characterized and studied. Based on these results, the physical mechanisms active in the investigated HMnS and HEA were identified and discussed. The results evidenced a substantial transferability of the design concepts and more importantly, they hint at a larger potential for microstructure and property tailoring in the HEA.

scholarly journals Effect of Heat Treatment and Titanium Addition on the Microstructure and Mechanical Properties of Cast Fe31Mn28 Ni15Al24.5Tix High-Entropy Alloys

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Shimaa El-Hadad ◽  
Mervat Ibrahim ◽  
Mohamed Mourad
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Treatment Time ◽  
Low Cost ◽  
High Hardness ◽  
Lamellar Spacing ◽  
High Entropy Alloys ◽  
Titanium Addition ◽  
High Entropy ◽  
Ti Content

High-entropy alloys (HEAs) are multiprincipal element alloys with controllable properties. Studying the mechanical properties of these alloys and relating them to their microstructures is of interest. In the current investigation, Fe31Mn28 Ni15Al24.5Tix high-entropy alloys with Ti content (0–3 wt.%) were prepared by casting in an induction furnace. Different heat treatments were applied, and the microstructure and hardness of the cast samples were studied. It was observed that addition of up to 3.0 wt.% Ti significantly increases the hardness of the alloy from 300 to 500 (Hv) by the combined effect of solid solution strengthening and via decreasing lamellar spacing. Heat treatment at 900°C for 10 h enhanced the hardness at lower Ti percentages (0.0–0.8 wt.%) by decreasing the lamellar spacing, while no change was observed at higher Ti content. It was also observed that extending the treatment time to 20 h affected negatively the hardness of the alloy. Concluding, HEAs can achieve high hardness using low-cost principle elements with minor alloying additives compared to the other traditional alloys.

Microstructures and mechanical properties of (AlCoCrFeMn)100 − xCux high-entropy alloys

2019 ◽  
Vol 35 (12) ◽  
pp. 1457-1463 ◽  
Author(s):  
Gang Qin ◽  
Yufeng Zhang ◽  
Ruirun Chen ◽  
Huiting Zheng ◽  
Liang Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Entropy Alloys ◽  
High Entropy ◽  
Microstructures And Mechanical Properties
Sign in / Sign up

Export Citation Format

Share Document