Study of Heat Treatment Parameters in Obtaining Glassceramic Materials with the Addition of Industrial Wastes

2014 ◽  
Vol 805 ◽  
pp. 598-603
Author(s):  
Cláudia Terezinha Kniess ◽  
G.J.M. Martins ◽  
P.B. Prates ◽  
Humberto Gracher Riella ◽  
Jonas V. Matsinhe ◽  
...  

The production of materials from crystallization of glass, called glassceramic, have proved interesting by the possibility of development of different microstructures, with reduced grain size and the presence of residual amorphous phase in different quantities. The method that uses the differential thermal analysis (DTA) provides research on the material properties over a wide temperature range, it ́s widely applied to crystallization processes of glassceramic materials. Within this context, this paper aims to study the kinetics of nucleation and crystal growth in glassceramic materials in the system SiO2-Al2O3-Li2O, obtained with the addition of mineral coal bottom ash as source of aluminosilicates, through the technique of differential thermal analysis.

2018 ◽  
Author(s):  
Asel Sartbaeva ◽  
Paul R. Raithby ◽  
Remi Castaing ◽  
Antony Nearchou

Through a combination of thermogravimetry, mass spectrometry and differential thermal analysis, we demonstrate for the first time that all four zeolites show experimental differences in their host-guest interactions with 18C6. In addition, we have estimated the kinetics of 18C6 decomposition, which is a technique that has not been applied to zeolites previously. Using these findings as a toolkit, a more rational use of OSDAs can be utilised to prepare designer zeolites. Furthermore, the new methodologies presented herein can be applied to current zeolites, such as MFI-type zeolites used in the petrochemical industry.


1983 ◽  
Vol 48 (12) ◽  
pp. 3340-3355 ◽  
Author(s):  
Pavel Fott ◽  
Pavel Šebesta

The kinetic parameters of reactivation of a carbonized hydrodesulphurization (HDS) catalyst by air were evaluated from combined thermogravimetric (TG) and differential thermal analysis (DTA) data. In addition, the gaseous products leaving a temperature-programmed reactor with a thin layer of catalyst were analyzed chromatographically. Two exothermic processes were found to take part in the reactivation, and their kinetics were described by 1st order equations. In the first process (180-400 °C), sulphur in Co and Mo sulphides is oxidized to sulphur dioxide; in the second process (300-540 °C), in which the essential portion of heat is produced, the deposited carbon is oxidized to give predominantly carbon dioxide. If the reaction heat is not removed efficiently enough, ignition of the catalyst takes place, which is associated with a transition to the diffusion region. The application of the obtained kinetic parameters to modelling a temperature-programmed reactivation is illustrated on the case of a single particle.


2011 ◽  
Vol 284-286 ◽  
pp. 1431-1434 ◽  
Author(s):  
Jin Rui Zhang ◽  
Ru Wang

In order to utilization the molybdenum tailings which be deposited in large quantities. Test used it to prepare glass-ceramics as main raw material, TiO2 as nucleation agents and CaO-Al2O3-SiO2 system and wollastonite as the principal crystalline phase. Heat treatment system of glass-ceramics was based on the differential thermal analysis. The crystalline phase, microstructure and characteristics of glass-ceramics were analysis by XRD, SEM and physical, chemical properties test. The result shows that the performance of glass-ceramics was superior to the other types of building decoration stone.


Sign in / Sign up

Export Citation Format

Share Document