Study on crystallization of glass by differential thermal analysis. Effect of added oxide on crystallization of Li2O-SiO2

1975 ◽  
Vol 10 (1) ◽  
pp. 94-100 ◽  
Author(s):  
K. Matusita ◽  
S. Sakka ◽  
T. Maki ◽  
M. Tashiro
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Crystallization Of Glass

Study of Heat Treatment Parameters in Obtaining Glassceramic Materials with the Addition of Industrial Wastes

2014 ◽  
Vol 805 ◽  
pp. 598-603
Author(s):  
Cláudia Terezinha Kniess ◽  
G.J.M. Martins ◽  
P.B. Prates ◽  
Humberto Gracher Riella ◽  
Jonas V. Matsinhe ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Thermal Analysis ◽  
Grain Size ◽  
Differential Thermal Analysis ◽  
Material Properties ◽  
Bottom Ash ◽  
Industrial Wastes ◽  
Residual Amorphous Phase ◽  
Kinetics Of ◽  
Crystallization Of Glass

The production of materials from crystallization of glass, called glassceramic, have proved interesting by the possibility of development of different microstructures, with reduced grain size and the presence of residual amorphous phase in different quantities. The method that uses the differential thermal analysis (DTA) provides research on the material properties over a wide temperature range, it ́s widely applied to crystallization processes of glassceramic materials. Within this context, this paper aims to study the kinetics of nucleation and crystal growth in glassceramic materials in the system SiO2-Al2O3-Li2O, obtained with the addition of mineral coal bottom ash as source of aluminosilicates, through the technique of differential thermal analysis.

Zeolites Fit For A Crown: Probing Host-Guest Interactions with Thermogravimetric Methods

2018 ◽  
Author(s):  
Asel Sartbaeva ◽  
Paul R. Raithby ◽  
Remi Castaing ◽  
Antony Nearchou
Keyword(s):  
Mass Spectrometry ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Petrochemical Industry ◽  
Rational Use ◽  
New Methodologies ◽  
First Time ◽  
Kinetics Of

Through a combination of thermogravimetry, mass spectrometry and differential thermal analysis, we demonstrate for the first time that all four zeolites show experimental differences in their host-guest interactions with 18C6. In addition, we have estimated the kinetics of 18C6 decomposition, which is a technique that has not been applied to zeolites previously. Using these findings as a toolkit, a more rational use of OSDAs can be utilised to prepare designer zeolites. Furthermore, the new methodologies presented herein can be applied to current zeolites, such as MFI-type zeolites used in the petrochemical industry.

PHASE EQUILIBRIUM IN THE AS2TE3-TM2TE3 SYSTEM.

2020 ◽  
Vol 5 (8(77)) ◽  
pp. 65-68
Author(s):  
Teymur Mammad Ilyasly ◽  
Rahman Hasanaga Fatullazade ◽  
Zakir Islam Ismailov ◽  
Nigar Nadir Jafarova
Keyword(s):  
Thermal Analysis ◽  
Solid Solution ◽  
Differential Thermal Analysis ◽  
Phase Equilibrium ◽  
Physicochemical Properties ◽  
Thermal Effects ◽  
Isothermal Annealing ◽  
Intermediate Phase ◽  
Physicochemical Analysis ◽  
Two Phases

The synthesis of alloys of the system was carried out stepwise in rotary furnaces. The synthesis mode was selected based on the physicochemical properties of the elementary components. For homogenization, the alloys were subjected to isothermal annealing at 750 and 1275 K, depending on the Tm2Te3 concentration, for 250 h after homogenization of the alloys, they were subjected to physicochemical analysis. The results of differential thermal analysis showed that reversible thermal effects are observed in the alloys of the system. In alloys in a 1: 1 ratio, a new intermediate phase is formed with a composition corresponding to the TmAsTe3 compound. The homogeneity area is observed in the concentration range 52.5-47.5. It was found that in the concentration range 98.5-52.5 Tm2Te3 there are two phases - a mixture of β and of the solid solution, and in the concentration range of 47.51 mol% Tm2Te3 phases and α are in equilibrium. ) 66 The eutectic has coordinates of 11.5 mol Tm2Te3 at a temperature of 575 K.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Kinetics of temperature-programmed reactivation of a hydrodesulphurization catalyst

1983 ◽  
Vol 48 (12) ◽  
pp. 3340-3355 ◽  
Author(s):  
Pavel Fott ◽  
Pavel Šebesta
Keyword(s):  
Carbon Dioxide ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Thin Layer ◽  
Kinetic Parameters ◽  
Diffusion Region ◽  
Reaction Heat ◽  
Gaseous Products ◽  
Temperature Programmed ◽  
Kinetics Of

The kinetic parameters of reactivation of a carbonized hydrodesulphurization (HDS) catalyst by air were evaluated from combined thermogravimetric (TG) and differential thermal analysis (DTA) data. In addition, the gaseous products leaving a temperature-programmed reactor with a thin layer of catalyst were analyzed chromatographically. Two exothermic processes were found to take part in the reactivation, and their kinetics were described by 1st order equations. In the first process (180-400 °C), sulphur in Co and Mo sulphides is oxidized to sulphur dioxide; in the second process (300-540 °C), in which the essential portion of heat is produced, the deposited carbon is oxidized to give predominantly carbon dioxide. If the reaction heat is not removed efficiently enough, ignition of the catalyst takes place, which is associated with a transition to the diffusion region. The application of the obtained kinetic parameters to modelling a temperature-programmed reactivation is illustrated on the case of a single particle.

Effect of experimental conditions on the differential thermal-analysis of karnallite type hydrates

1984 ◽  
Vol 49 (12) ◽  
pp. 2770-2775
Author(s):  
Vladimir Z. Poilov ◽  
Jana Ederová ◽  
Antonín Blažek
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Experimental Conditions

Article in Russian

Study of thermal stability of n-type skutterudites Sr0.07Ba0.07Yb0.07Co4Sb12 by differential thermal analysis and Knudsen effusion method

Calphad ◽  
2021 ◽  
Vol 73 ◽  
pp. 102258
Author(s):  
František Zelenka ◽  
Jakub Strádal ◽  
Pavel Brož ◽  
Jan Vřešťál ◽  
Jiří Buršík ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Knudsen Effusion ◽  
Knudsen Effusion Method ◽  
Effusion Method ◽  
Thermal Stability Of
Sign in / Sign up

Export Citation Format

Share Document