Mixture of Zinc Oxide Microrod and Poly(3-Dodecylthiophene) with Melastoma malabathricum Dye for Hybrid Solar Cell

2016 ◽  
Vol 846 ◽  
pp. 256-263
Author(s):  
Hasiah Salleh ◽  
Nik Aziz Nik Ali ◽  
Azhar Mohd Sinin ◽  
Engku Abdul Ghapur Engku Ali ◽  
Muhammad Afiq Firdaus
Keyword(s):  
Electrical Conductivity ◽  
Zinc Oxide ◽  
Solar Cell ◽  
Light Intensity ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Indium Tin Oxide ◽  
Power Conversion ◽  
Hybrid Solar Cell ◽  
Thermal Method

A single hybrid solar cell (SHSC) which consist of zinc oxide (ZnO) micro-rod and Poly (3-dodecylthiophene)(P3DDT) materials with nature dye from Melastomamalabathricum fruit (Mm) were fabricated to determine it electrical properties and power conversion efficiency (PCE). The ZnO microrod was growth by thermal method. P3DT was synthesis by oxidation polymerization method. Nature dye was extracted from Mm fruit in purplecolor.The fabrication of a SHSC started with growth ZnO microrodon the Indium Tin Oxide (ITO) in thin filmform, followed with P3DT layers and finally layered with Mm in 5 layers and 10 layers respectively.The SHSC wascharacterized the electrical conductivity and PCE also compared under dark condition and various light intensity. The conductivity of the samples is increase within the increment of light intensity and the efficiency of SHSC increase within the increment of layer of Mm. The highest electrical conductivity was for 10 layers of dye which is 2.678 + 0.002 Scm-1. The power conversion efficiency (PCE) of the ITO/ZnO/P3DDT/10 layers dye achieved was the highest which is 0.0011% under radiation of 200 Wm-2 intensity of light. As a conclusion, it can say that the amount of Mm can affect the performance of hybrid solar cell, where the dye is increased, the electrical conductivity and the PCE also increase. Thus, the Mm is a good dye and can be potential to apply in the solar cell.

scholarly journals Hybrid Solar Cell using Conjugated Chlorophyll from Pandanus Amaryllifolius as Photosensitizers

2019 ◽  
Vol 8 (4) ◽  
pp. 10142-10147
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Solar Energy ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Hybrid Solar Cell ◽  
Hybrid Solar Cells ◽  
Renewable Power ◽  
Pandanus Amaryllifolius

Solar energy is one in all few sources to renewable power and it is considerably critical in our each day lifestyles usage thus resulted to ensure the practicality and usefulness of the devices which regularly used to capture and manipulate solar energy. In this work, studies the effect of conjugated chlorophyll (iCHLO) on power conversion efficiency with relation of iCHLO where optical and electrical properties were investigated. These hybrid solar cells consist of combination of organic (Poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) and iCHLO) and inorganic (Titanium Dioxide, TiO2) materials. These hybrid solar cells were fabricated bilayer of ITO/TiO2/PEDOT: PSS/iCHLO/Al. Chlorophyll compound (CHLO) was extracted from the Pandanus amaryllifolius leaves. CHLO undergoes conjugate process by oxidation polymerization using Ferric Chloride (FeCl3) as catalyst. Different percentage of FeCl3 was varied by 5%, 10% and 15% of CHLO molecular weight. Result shows that UV-Vis absorption spectra of CHLO was absorbed in the range of 400 nm – 600 nm (CHLO-PA) and 240 nm - 360 nm (iCHLO-PA). The highest power conversion efficiency (PCE) was obtained at 1.33% and electrical conductivity is 0.135 Scm1 for ITO/TiO2/PEDOT: PSS/iCHLO-PA 10% hybrid solar cell.

An 11%-Power-Conversion-Efficiency Organic–Inorganic Hybrid Solar Cell Achieved by Facile Organic Passivation

2013 ◽  
Vol 34 (3) ◽  
pp. 345-347 ◽  
Author(s):  
Dong Liu ◽  
Yunfang Zhang ◽  
Xiao Fang ◽  
Fute Zhang ◽  
Tao Song ◽  
...  
Keyword(s):  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Hybrid Solar Cell ◽  
Inorganic Hybrid

scholarly journals Aluminum-Doped Zinc Oxide as Front Electrode for Rear Emitter Silicon Heterojunction Solar Cells with High Efficiency

2019 ◽  
Vol 9 (5) ◽  
pp. 862 ◽  
Author(s):  
Daniel Meza ◽  
Alexandros Cruz ◽  
Anna Morales-Vilches ◽  
Lars Korte ◽  
Bernd Stannowski
Keyword(s):  
Zinc Oxide ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Indium Tin Oxide ◽  
High Efficiency ◽  
Power Conversion ◽  
Transparent Conductive Oxide ◽  
Rear Side ◽  
Aluminum Doped Zinc Oxide

Transparent conductive oxide (TCO) layers of aluminum-doped zinc oxide (ZnO:Al) were investigated as a potential replacement of indium tin oxide (ITO) for the front contact in silicon heterojunction (SHJ) solar cells in the rear emitter configuration. It was found that ZnO:Al can be tuned to yield cell performance almost at the same level as ITO with a power conversion efficiency of 22.6% and 22.8%, respectively. The main reason for the slight underperformance of ZnO:Al compared to ITO was found to be a higher contact resistivity between this material and the silver grid on the front side. An entirely indium-free SHJ solar cell, replacing the ITO on the rear side by ZnO:Al as well, reached a power conversion efficiency of 22.5%.

Investigating the Humidity Effect on Si/PEDOT:PSS Hybrid Solar Cell and Power Conversion Efficiency Recovery by Re-Deposition of the Hole Transporting Layer

2013 ◽  
Author(s):  
C. Y. Lam ◽  
S. Q. Shi ◽  
J. Lu ◽  
P. K. L. Chan
Keyword(s):  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Hybrid Solar Cell ◽  
Silicon Dioxide Layer ◽  
Humidity Effect ◽  
Silicon Nanostructure ◽  
Hole Transporting ◽  
Average Device

The degradation of silicon nanostructure / poly(3,4-ethylenedioxylthiophene : poly(styrenesulphonic acid) (SiNS/PEDOT:PSS) hybrid solar cell due to the moisture is investigated with an environmental chamber. The unencapsulated devices were tested under different relative humidity (RH) varied from (15% to 100%). Under different RH, the devices show various degradation trends. After 3hrs of storage under 100% RH, the average device power conversion efficiency (PCE) drops from 6.52% to 1.27%. While the device is stored under 15% RH, the averaged PCE just drop from 6.40% to 5.49% and the device at 60% RH degrades from 5.97% to 3.12%. To understand the cause of the device degradation, we compare the ITO conductivity and apply tunneling electron microscopy (TEM) to study the growth of the silicon dioxide layer on the silicon nanostructures. We confirmed that the major cause of the PCE drop in the current devices are due to the decrease of the PEDOT:PSS conductivity and the increase of the interface resistances. By re-depositing the PEDOT:PSS layer onto the degraded device and recycling the Si (and fresh ITO), we demonstrated that the efficiency of the device can be partially recovered (to fully recovered). The current work not only highlighted the importance of the humidity control in these SiNS/PEDOT:PSS hybrid solar cells, but also identified the major causes of the device degradation. The observation has been re-confirmed by recovering the PCE of the degraded device with a fresh PEDOT:PSS layer and a fresh ITO.

scholarly journals Digital printing of a novel electrode for stable flexible organic solar cells with a power conversion efficiency of 8.5%

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
S. Wageh ◽  
Mahfoudh Raïssi ◽  
Thomas Berthelot ◽  
Matthieu Laurent ◽  
Didier Rousseau ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Solution Processed ◽  
Transparent Conducting

AbstractPoly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) mixed with single-wall nanotubes (SWNTs) (10:1) and doped with (0.1 M) perchloric acid (HClO4) in a solution-processed film, working as an excellent thin transparent conducting film (TCF) in organic solar cells, was investigated. This new electrode structure can be an outstanding substitute for conventional indium tin oxide (ITO) for applications in flexible solar cells due to the potential of attaining high transparency with enhanced conductivity, good flexibility, and good durability via a low-cost process over a large area. In addition, solution-processed vanadium oxide (VOx) doped with a small amount of PEDOT-PSS(PH1000) can be applied as a hole transport layer (HTL) for achieving high efficiency and stability. From these viewpoints, we investigate the benefit of using printed SWNTs-PEDOT-PSS doped with HClO4 as a transparent conducting electrode in a flexible organic solar cell. Additionally, we applied a VOx-PEDOT-PSS thin film as a hole transporting layer and a blend of PTB7 (polythieno[3,4-b] thiophene/benzodithiophene): PC71BM (phenyl-C71-butyric acid methyl ester) as an active layer in devices. Zinc oxide (ZnO) nanoparticles were applied as an electron transport layer and Ag was used as the top electrode. The proposed solar cell structure showed an enhancement in short-circuit current, power conversion efficiency, and stability relative to a conventional cell based on ITO. This result suggests a great carrier injection throughout the interfacial layer, high conductivity and transparency, as well as firm adherence for the new electrode.

Donor-π-acceptor, triazine-linked porphyrin dyads as sensitizers for dye-sensitized solar cells

2015 ◽  
Vol 19 (01-03) ◽  
pp. 175-191 ◽  
Author(s):  
Ganesh D. Sharma ◽  
Galateia E. Zervaki ◽  
Kalliopi Ladomenou ◽  
Emmanuel N. Koukaras ◽  
Panagiotis P. Angaridis ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Carboxylic Acid ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Dye Sensitized Solar Cells ◽  
Orbital Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Two porphyrin dyads with the donor-π-acceptor molecular architecture, namely ( ZnP )-[triazine-gly]-( H 2 PCOOH ) and ( ZnP )-[triazine-Npip]-( H 2 PCOOH ), which consist of a zinc-metalated porphyrin unit and a free-base porphyrin unit covalently linked at their peripheries to a central triazine group, substituted either by a glycine in the former or a N-piperidine group in the latter, have been synthesized via consecutive amination substitution reactions of cyanuric chloride. The UV-vis absorption spectra and cyclic-voltammetry measurements of the two dyads, as well as theoretical calculations based on Density Functional Theory, suggest that they have suitable frontier orbital energy levels for use as sensitizers in dye-sensitized solar cells. Dye-sensitized solar cells based on ( ZnP )-[triazine-gly]-( H 2 PCOOH ) and ( ZnP )-[triazine-Npip]-( H 2 PCOOH ) have been fabricated, and they were found to exhibit power conversion efficiency values of 5.44 and 4.15%, respectively. Photovoltaic measurements (J–V curves) and incident photon to current conversion efficiency spectra of the two solar cells suggest that the higher power conversion efficiency value of the former solar cell is a result of its enhanced short circuit current, open circuit voltage, and fill factor values, as well as higher dye loading. This is ascribed to the existence of two carboxylic acid anchoring groups in ( ZnP )-[triazine-gly]-( H 2 PCOOH ), compared to one carboxylic acid group in ( ZnP )-[triazine-Npip]-( H 2 PCOOH ), which leads to a more effective binding onto the TiO 2 photoanode. Electrochemical impedance spectra show evidence that the ( ZnP )-[triazine-gly]-( H 2 PCOOH ) based solar cell exhibits a longer electron lifetime and more effective suppression of charge recombination reactions between the injected electrons and electrolyte.

scholarly journals Numerical Modeling and Optimization of Lead-Free Hybrid Double Perovskite Solar Cell by Using SCAPS-1D

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Syed Sajjad Hussain ◽  
Saira Riaz ◽  
Ghazi Aman Nowsherwan ◽  
Khizer Jahangir ◽  
Akram Raza ◽  
...  
Keyword(s):  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Double Perovskite ◽  
Perovskite Solar Cell ◽  
Lead Free ◽  
Inorganic Perovskite ◽  
Hybrid Perovskite

The highest power conversion efficiency (PCE) for organic-inorganic perovskite solar cells based on lead is reported as 25.2% in 2019. Lead-based hybrid perovskite materials are used in several photovoltaics applications, but these are not highly favored due to the toxicity of lead and volatility of organic cations. On the other hand, hybrid lead-free double perovskite has no such harm. In this research study, SCAPS numerical simulation is utilized to evaluate and compare the results of perovskite solar cell based on double perovskite FA 2 BiCuI 6 and standard perovskite CH 3 NH 3 PbI 3 as an active layer. The results show that the power conversion efficiency obtained in the case of FA 2 BiCuI 6 is 24.98%, while in the case of CH 3 NH 3 PbI 3 , it is reported as 26.42%. This indicates that the hybrid organic-inorganic double perovskite FA 2 BiCuI 6 has the ability to replace hybrid organic-inorganic perovskite CH 3 NH 3 PbI 3 to expand next-generation lead-free harmless materials for solar cell applications.

Sign in / Sign up

Export Citation Format

Share Document