A Study of Porosity of Products Sintered from BrS30 Alloy Electro-Erosion Powders

2020 ◽  
Vol 989 ◽  
pp. 187-191
Author(s):  
Evgeniy V. Ageev ◽  
Anton S. Pereverzev ◽  
Sergey V. Khardikov

The article discusses a topical issue of scrap metal recycling, in particular BrS30 alloy scrap recycling, into powders for their repeated use to fabricate and harden machine parts. Nowadays, one of the most promising method of processing any conductive material is electro-erosion dispersion, which is non-waste, eco-friendly and energy-efficient. The paper presents the findings of a research of porosity of products, sintered from leaded bronze pressed powders, obtained by electro-erosion dispersion in distilled water. It was determined that in uniaxial pressing of the powder using a desktop hydraulic press, and in isostatic pressing of the powder using an isostatic press, and further sintering of the obtained samples in a folding tube furnace, the porosity was 0.61% and 1.44%, respectively.

2020 ◽  
Vol 25 (10) ◽  
pp. 1930-1941
Author(s):  
Benjamin Fritz ◽  
Carin Aichele ◽  
Mario Schmidt

Abstract Purpose The gold routes satisfying the global gold supply are mining (74%), recycling of high-value gold (23%), and electronic scraps (3%). Besides its applications in the investment, jewelry, and industrial sector, gold also has a bad image. The gold production in industrial as well as artisanal and small-scale mines creates negative impacts such as resource depletion, extensive chemical use, toxic emissions, high energy consumption, and social concerns that are of great importance. On the other hand, almost all gold is recycled and has historically always been. In common life cycle assessment (LCA) databases, there is no data on recycling of high-value gold available. This article attempts to answer the question what the ecological benefits of this recycling are. Method In this study, we were able to collect process data on the most commonly used high-value gold scrap recycling process, the aqua regia method, from several state-of-the-art German refineries. With this data, life cycle inventories were created and a life cycle model was produced to finally generate life cycle impacts of high-value gold scrap recycling. Results This study contains the corresponding inventories and thus enables other interested parties to use these processes for their own LCA studies. The results show that high-value gold scrap recycling has a considerably lower environmental impact than electronic gold scrap recycling and mining. For example, high-value gold scrap recycling in Germany results in a cumulative energy demand (CED) of 820 MJ and a global warming potential (GWP) of 53 kg-CO2-Eq. per kg gold. In comparison, common datasets indicate CED and GWP levels of nearly 8 GJ and 1 t-CO2-Eq. per kg gold, respectively, for electronic scrap recycling and levels of 240 GJ and 16 t-CO2-Eq. per kg gold, respectively, for mining. Conclusion The results show that buying gold from precious metal recycling facilities with high technological standards and a reliable origin of the recycling material is about 300 times better than primary production.


JOM ◽  
1990 ◽  
Vol 42 (4) ◽  
pp. 38-41 ◽  
Author(s):  
Han Spoel

2013 ◽  
Vol 51 (1) ◽  
pp. 432-440 ◽  
Author(s):  
Richard L. Neitzel ◽  
Allison Crollard ◽  
Carlos Dominguez ◽  
Bert Stover ◽  
Noah S. Seixas

2021 ◽  
Vol 247 ◽  
pp. 01014
Author(s):  
Sergey Zolotukhin ◽  
Olga Kukina ◽  
Ekaterina Artemova ◽  
Andrey Eremin ◽  
Vladimir Volokitin ◽  
...  

The paper presents data on the volume of materials consumed by builders and the carbon dioxide emissions that occur during this process. The reasons for the formation and volume of construction debris are considered. Recycling technologies currently used in the demolition of buildings are associated with crushing. The resulting concrete mix is used only for filling low-level earthworks due to the rapid carbonation of concrete surfaces. The scrap metal formed during crushing is used for remelting, polluting the atmosphere and requiring a large amount of energy. It is proved that due to the low economic and environmental efficiency, this method of recycling is a dead end. Studies have found that the constant increase in the strength of concrete and the absence of a decrease in the strength characteristics of reinforcing steels, stone materials, bricks, which are operated for a long time in favorable temperature and humidity conditions, allows them to be reused. General approaches have been developed that require changes in the existing technologies for the renovation of urban areas, the demolition of individual buildings and structures that currently exist. To reduce CO2 emissions and construction debris, it is enough to increase the volume of gentrification, reconstruction, major repairs, and re-profiling of the existing residential and industrial stock. When demolishing buildings, it is necessary to abandon the method of collapse of building structures with their further fragmentation. The method of piecemeal dismantling with repeated use of materials, products and structures (after determining their strength indicators by specialists), allows you to dramatically reduce the problems of construction debris and carbon dioxide emissions.


Sign in / Sign up

Export Citation Format

Share Document