Influence of Surface Condition on Oxides Layer Morphology on NiCrAlY Coating during Oxidation at Temperature 1000°C and 1100°C
Characterization of top-surface of NiCrAlY coating deposited by plasma spraying process on Inconel 625 Ni based superalloys was analyzed in two different completely conditions. First of them was as sprayed state of NiCrAlY coating and the second one was condition after grinding process. The basic aim of this treatment was related to obtain totally different conditions of coatings surface especially from roughness point of view. Those two types of top surface morphology was a base to comparison of oxidation resistant during static oxidation test at temperature of 1000°C and 1100°C. The temperature of static oxidation test was 1000°C and 1100°C. The specimens were moved out from furnace after 25, 300, 500, 750 and 1000 hours of exposition in laboratory air. The range of investigations after each interval included top surface characterization of specimens by SEM, XRD and EDS method. Those investigations showed that different types of top surface conditions had a fundamental influence on oxides layer morphology. Especially in the case of phase`s constituent of oxides zone. More detailed investigations were made on the cross sections of two types of investigated specimens. Analysis of oxides layer morphology showed in this case basic differences in thickness of oxides zone which was much higher in the case of as sprayed NiCrAlY coating.