Subsurface Appraisal and Field Development Planning of the Gas Condensate Field GVLA

Author(s):  
David Maxwell McKay ◽  
William Wilcox ◽  
Anping Yang ◽  
Baosheng Liang ◽  
Joseph Patrick Brinkman ◽  
...  

2018 ◽  
Author(s):  
Harshil Saradva ◽  
Siddharth Jain ◽  
Mark Sarssam ◽  
Masoud Al Hamadi ◽  
Matthew Robert


2012 ◽  
Author(s):  
Sriram Balasubramanian ◽  
Ben Wang ◽  
Yan Li ◽  
Elliott Ginger ◽  
Baosheng Liang ◽  
...  


2021 ◽  
Author(s):  
Kanat Aktassov ◽  
Dauletbek Ayaganov ◽  
Kanat Imagambetov ◽  
Ruslan Alissov ◽  
Said Muratbekov ◽  
...  

Abstract This paper presents a practical methodology of optimizing and building a detailed field surface network system by using the high-resolution reservoir simulator driven custom-made Python scripts to efficiently predict the future performance of the vast oil and gas-condensate carbonate field. All existing surface hydraulic tables are quality checked and lifting issue constraints corrected. Pressure losses at the wellhead chokes incorporated into the high-resolution reservoir simulator in the form of equation by using the custom scripts instead of a table format to calculate gas rate dependent pressure losses more precisely. Consequently, all 400+ surface production system manifolds, pipes and well chokes Horizontal Flow Performance (HFP) tables are updated and coupled to the reservoir simulator through Field Management (FM) controller which in turn generates Inflow Performance Relationship (IPR) tables for the coupled wells and passes them to solve the network. The methodology described in this paper applied for a complex field development planning of the Karachaganak. At present, reservoir management strategy requires constant balancing effort to uniformly spread gas re-injection into the lower Voidage Replacement Ratio areas in the Upper Gas-Condensate part of the reservoir due to reservoir heterogeneity. Additionally, an increase in field and wells gas-oil ratio and water-cut creates bottlenecks in the surface gathering system and requires robust solutions to decongest the surface network. Current simulation tools are not always effective due longer run times and simulation instability due to complex network system. As a solution, project-specific network balancing challenges are resolved by incorporating custom-made scripts into the high-resolution simulator. Faster and flexible integrated model based on hydraulic tables reproduced the historical pressure losses of the surface pipelines at similar resolution and generated accurate prediction profiles in a twice-quicker time than existing reservoir simulator. Overall, this approach helped to generate more stable production profiles by identifying bottlenecks in the surface network and evaluate future projects with more confidence by achieving a significant CAPEX cost savings. The comprehensive guidelines provided in this paper can aid reservoir modeling by setting up flexible integrated models to account for surface network effects. The value of incorporating Python scripts demonstrated to implement non-standard and project specific network balancing solutions leveraging on the flexibility and the openness of the modelling tool.



Author(s):  
R.R. Haliulin ◽  
◽  
S.N. Zakirov ◽  
A.H. Kha ◽  
N.E. Vedernikov ◽  
...  


Author(s):  
Atheer Dheyauldeen ◽  
Omar Al-Fatlawi ◽  
Md Mofazzal Hossain

AbstractThe main role of infill drilling is either adding incremental reserves to the already existing one by intersecting newly undrained (virgin) regions or accelerating the production from currently depleted areas. Accelerating reserves from increasing drainage in tight formations can be beneficial considering the time value of money and the cost of additional wells. However, the maximum benefit can be realized when infill wells produce mostly incremental recoveries (recoveries from virgin formations). Therefore, the prediction of incremental and accelerated recovery is crucial in field development planning as it helps in the optimization of infill wells with the assurance of long-term economic sustainability of the project. Several approaches are presented in literatures to determine incremental and acceleration recovery and areas for infill drilling. However, the majority of these methods require huge and expensive data; and very time-consuming simulation studies. In this study, two qualitative techniques are proposed for the estimation of incremental and accelerated recovery based upon readily available production data. In the first technique, acceleration and incremental recovery, and thus infill drilling, are predicted from the trend of the cumulative production (Gp) versus square root time function. This approach is more applicable for tight formations considering the long period of transient linear flow. The second technique is based on multi-well Blasingame type curves analysis. This technique appears to best be applied when the production of parent wells reaches the boundary dominated flow (BDF) region before the production start of the successive infill wells. These techniques are important in field development planning as the flow regimes in tight formations change gradually from transient flow (early times) to BDF (late times) as the production continues. Despite different approaches/methods, the field case studies demonstrate that the accurate framework for strategic well planning including prediction of optimum well location is very critical, especially for the realization of the commercial benefit (i.e., increasing and accelerating of reserve or assets) from infilled drilling campaign. Also, the proposed framework and findings of this study provide new insight into infilled drilling campaigns including the importance of better evaluation of infill drilling performance in tight formations, which eventually assist on informed decisions process regarding future development plans.



2021 ◽  
Author(s):  
Pavel Dmitrievich Gladkov ◽  
Anastasiia Vladimirovna Zheltikova

Abstract As is known, fractured reservoirs compared to conventional reservoirs have such features as complex pore volume structure, high heterogeneity of the porosity and permeability properties etc. Apart from this, the productivity of a specific well is defined above all by the number of natural fractures penetrated by the wellbore and their properties. Development of fractured reservoirs is associated with a number of issues, one of which is related to uneven and accelerated water flooding due to water breakthrough through fractures to the wellbores, for this reason it becomes difficult to forecast the well performance. Under conditions of lack of information on the reservoir structure and aquifer activity, the 3D digital models of the field generated using the hydrodynamic simulators may feature insufficient predictive capability. However, forecasting of breakthroughs is important in terms of generating reliable HC and water production profiles and decision-making on reservoir management and field facilities for produced water treatment. Identification of possible sources of water flooding and planning of individual parameters of production well operation for the purpose of extending the water-free operation period play significant role in the development of these reservoirs. The purpose of this study is to describe the results of the hydrochemical monitoring to forecast the water flooding of the wells that penetrated a fractured reservoir on the example of a gas condensate field in Bolivia. The study contains data on the field development status and associated difficulties and uncertainties. The initial data were results of monthly analyses of the produced water and the water-gas ratio dynamics that were analyzed and compared to the data on the analogue fields. The data analysis demonstrated that first signs of water flooding for the wells of the field under study may be diagnosed through the monitoring of the produced water mineralization - the water-gas ratio (WGR) increase is preceded by the mineralization increase that may be observed approximately a month earlier. However, the data on the analogue fields shows that this period may be longer – from few months to two years. Thus, the hydrochemical method within integrated monitoring of development of a field with a fractured reservoir could be one of the efficient methods to timely adjust the well operation parameters and may extend the water-free period of its operation.



2015 ◽  
Author(s):  
A. V. Alferov ◽  
A. G. Lutfurakhmanov ◽  
K. V. Litvinenko ◽  
S. E. Zdolnik


Sign in / Sign up

Export Citation Format

Share Document