Non-Lead Based Piezoelectric Thin Films: Materials and Energy Harvesting Device

2011 ◽  
Vol 2011 (CICMT) ◽  
pp. 000033-000036
Author(s):  
Seung-Hyun Kim ◽  
Alice Leung ◽  
Eun Young Lee ◽  
Lindsay Kuhn ◽  
Wenyan Jiang ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Energy Harvesting ◽  
Average Power ◽  
Low Frequency ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Thin Films ◽  
Chemical Solution Deposition Method ◽  
Dense Microstructure ◽  
Low Frequency Vibration

Non-lead based piezoelectric thin films of (K,Na)(Nb,Ta)O3–BiFeO3 (NKNT-BF) were successfully fabricated by the chemical solution deposition method. Small concentration of BF (5 mol %) added into NKNT films led to a fully dense microstructure and enhanced dielectric and piezoelectric properties compared to pure NKNT films. The measured dielectric constant and piezoelectric d33 values were around 575 and 50 pC/N, respectively. A thin film NKNT-BF piezoelectric cantilever with a micromachined Si proof mass was fabricated for a low frequency vibration energy harvesting device. The average power and the power density of NKNT-BF energy harvesting cantilever with the device volume of 0.007 cm3 were 1.82 μW and 260 μW/cm3 at the resonance frequency of 130 Hz and the acceleration of 0.75 G. Even if these values were somewhat inferior to those of the conventional PZT energy harvesting device, NKNT-BF thin film provided the promising results as an alternative material of PZT for the piezoelectric MEMS applications in the future.

A piezoelectric spring pendulum oscillator used for multi-directional and ultra-low frequency vibration energy harvesting

2018 ◽  
Vol 231 ◽  
pp. 600-614 ◽  
Author(s):  
Yipeng Wu ◽  
Jinhao Qiu ◽  
Shengpeng Zhou ◽  
Hongli Ji ◽  
Yang Chen ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Low Frequency Vibration

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

2006 ◽  
Vol 23 (3) ◽  
pp. 732-734 ◽  
Author(s):  
Fang Hua-Bin ◽  
Liu Jing-Quan ◽  
Xu Zheng-Yi ◽  
Dong Lu ◽  
Chen Di ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Power Generator ◽  
Low Frequency Vibration

Hybrid nanogenerators for low frequency vibration energy harvesting and self-powered wireless locating

2018 ◽  
Vol 5 (1) ◽  
pp. 015510 ◽  
Author(s):  
Ying Yuan ◽  
Hulin Zhang ◽  
Jie Wang ◽  
Yuhang Xie ◽  
Saeed Ahmed Khan ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Low Frequency Vibration ◽  
Self Powered

scholarly journals Improving functionality of vibration energy harvesters using magnets

2012 ◽  
Vol 23 (13) ◽  
pp. 1433-1449 ◽  
Author(s):  
Lihua Tang ◽  
Yaowen Yang ◽  
Chee-Kiong Soh
Keyword(s):  
Experimental Study ◽  
Energy Harvesting ◽  
Transition Region ◽  
Parametric Study ◽  
Low Frequency ◽  
Design Guidelines ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Low Frequency Vibration

In recent years, several strategies have been proposed to improve the functionality of energy harvesters under broadband vibrations, but they only improve the efficiency of energy harvesting under limited conditions. In this work, a comprehensive experimental study is conducted to investigate the use of magnets for improving the functionality of energy harvesters under various vibration scenarios. First, the nonlinearities introduced by magnets are exploited to improve the performance of vibration energy harvesting. Both monostable and bistable configurations are investigated under sinusoidal and random vibrations with various excitation levels. The optimal nonlinear configuration (in terms of distance between magnets) is determined to be near the monostable-to-bistable transition region. Results show that both monostable and bistable nonlinear configurations can significantly outperform the linear harvester near this transition region. Second, for ultra-low-frequency vibration scenarios such as wave heave motions, a frequency up-conversion mechanism using magnets is proposed. By parametric study, the repulsive configuration of magnets is found preferable in the frequency up-conversion technique, which is efficient and insensitive to various wave conditions when the magnets are placed sufficiently close. These findings could serve as useful design guidelines when nonlinearity or frequency up-conversion techniques are employed to improve the functionality of vibration energy harvesters.

Research on Piezoelectric Generators for Vibration Energy Harvesting

2015 ◽  
Vol 757 ◽  
pp. 171-174
Author(s):  
Kai Zhou ◽  
Fang Xie ◽  
Yi Tao ◽  
Hai Xia Du
Keyword(s):  
Wireless Networks ◽  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Small Scale ◽  
Vibration Energy Harvesting ◽  
Low Frequency Vibration ◽  
Piezoelectric Cantilever ◽  
Study Results ◽  
Generation Capacity

Ambient energy harvesting has been in recent years the recurring object of a number of research efforts aimed at providing an autonomous solution to the powering of small scale electronic mobile devices. Among the different solutions, vibration energy harvesting has played a major role due to the almost universal presence of mechanical vibrations. In the paper, a piezoelectric cantilever device for harvesting the ambient low-frequency vibration energy is designed, and influences of its structure on output voltage and power generation capacity are studied also. The study results show that the piezoelectric cantilever can produce enough power energy which meets the operation requirements of sensors in wireless networks. It provides a method and corresponding theoretical basis for the harvesting of ambient low-frequency vibration energy and the design of self-supply devices for sensors in wireless networks.

Constrained Design Optimization of Vibration Energy Harvesting Devices

2013 ◽  
Vol 136 (2) ◽  
Author(s):  
Mehdi Hendijanizadeh ◽  
Mohamed Moshrefi-Torbati ◽  
Suleiman M. Sharkh
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Load Resistance ◽  
Relative Displacement ◽  
Internal Resistance ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Optimum Load ◽  
Seismic Mass ◽  
Low Frequency Vibration

Existing design criteria for vibration energy harvesting systems provide guidance on the appropriate selection of the seismic mass and load resistance. To harvest maximum power in resonant devices, the mass needs to be as large as possible and the load resistance needs to be equal to the sum of the internal resistance of the generator and the mechanical damping equivalent resistance. However, it is shown in this paper that these rules produce suboptimum results for applications where there is a constraint on the relative displacement of the seismic mass, which is often the case. When the displacement is constrained, increasing the mass beyond a certain limit reduces the amount of harvested power. The optimum load resistance in this case is shown to be equal to the generator's internal resistance. These criteria are extended to those devices that harvest energy from a low-frequency vibration by utilizing an interface that transforms the input motion to higher frequencies. For such cases, the optimum load resistance and the corresponding transmission ratio are derived.

Sign in / Sign up

Export Citation Format

Share Document