scholarly journals Plantar Loading During Cutting While Wearing a Rigid Carbon Fiber Insert

2014 ◽  
Vol 49 (3) ◽  
pp. 297-303 ◽  
Author(s):  
Robin M. Queen ◽  
Alicia N. Abbey ◽  
Ravi Verma ◽  
Robert J. Butler ◽  
James A. Nunley
Keyword(s):  
Contact Area ◽  
Peak Pressure ◽  
Pressure Profile ◽  
Delayed Union ◽  
Stress Fractures ◽  
Lower Extremity Injury ◽  
Time Integral ◽  
Carbon Plate ◽  
Force Time ◽  
Force Time Integral

ContextStress fractures are one of the most common injuries in sports, accounting for approximately 10% of all overuse injuries. Treatment of fifth metatarsal stress fractures involves both surgical and nonsurgical interventions. Fifth metatarsal stress fractures are difficult to treat because of the risks of delayed union, nonunion, and recurrent injuries. Most of these injuries occur during agility tasks, such as those performed in soccer, basketball, and lacrosse.Objective:To examine the effect of a rigid carbon graphite footplate on plantar loading during 2 agility tasks.Design: Crossover study.Setting:Laboratory.Patients or Other Participants:A total of 19 recreational male athletes with no history of lower extremity injury in the past 6 months and no previous metatarsal stress fractures were tested.Main Outcome Measure(s): Seven 45° side-cut and crossover-cut tasks were completed in a shoe with or without a full-length rigid carbon plate. Testing order between the shoe conditions and the 2 cutting tasks was randomized. Plantar-loading data were recorded using instrumented insoles. Peak pressure, maximum force, force-time integral, and contact area beneath the total foot, the medial and lateral midfoot, and the medial, middle, and lateral forefoot were analyzed. A series of paired t tests was used to examine differences between the footwear conditions (carbon graphite footplate, shod) for both cutting tasks independently (α = .05).Results:During the side-cut task, the footplate increased total foot and lateral midfoot peak pressures while decreasing contact area and lateral midfoot force-time integral. During the crossover-cut task, the footplate increased total foot and lateral midfoot peak pressure and lateral forefoot force-time integral while decreasing total and lateral forefoot contact area.Conclusions:Although a rigid carbon graphite footplate altered some aspects of the plantar-pressure profile during cutting in uninjured participants, it was ineffective in reducing plantar loading beneath the fifth metatarsal.

scholarly journals Changes in Plantar Loading Based on Shoe Type and Sex During a Jump-Landing Task

2013 ◽  
Vol 48 (5) ◽  
pp. 601-609 ◽  
Author(s):  
Justin C. DeBiasio ◽  
Mary E. Russell ◽  
Robert J. Butler ◽  
James A. Nunley ◽  
Robin M. Queen
Keyword(s):  
Contact Area ◽  
Stress Fractures ◽  
Maximum Force ◽  
Lower Extremity Injury ◽  
Jump Landing ◽  
Time Integral ◽  
Running Shoes ◽  
History Of ◽  
Force Time ◽  
Force Time Integral

Context: Metatarsal stress fractures are common in cleated-sport athletes. Previous authors have shown that plantar loading varies with footwear, sex, and the athletic task. Objective: To examine the effects of shoe type and sex on plantar loading in the medial midfoot (MMF), lateral midfoot (LMF), medial forefoot (MFF), middle forefoot (MidFF), and lateral forefoot (LFF) during a jump-landing task. Design: Crossover study. Setting: Laboratory. Patients or Other Participants: Twenty-seven recreational athletes (14 men, 13 women) with no history of lower extremity injury in the last 6 months and no history of foot or ankle surgery. Main Outcome Measure(s): The athletes completed 7 jumping trials while wearing bladed-cleat, turf-cleat, and running shoes. Maximum force, contact area, contact time, and the force-time integral were analyzed in each foot region. We calculated 2 × 3 analyses of variance (α = .05) to identify shoe-condition and sex differences. Results: We found no shoe × sex interactions, but the MMF, LMF, MFF, and LFF force-time integrals were greater in men (P < .03). The MMF maximum force was less with the bladed-cleat shoes (P = .02). Total foot and MidFF maximum force was less with the running shoes (P < .01). The MFF and LFF maximum forces were different among all shoe conditions (P < .01). Total foot contact area was less in the bladed-cleat shoes (P = .01). The MMF contact area was greatest in the running shoes (P < .01). The LFF contact area was less in the running shoes (P = .03). The MFF and LFF force-time integrals were greater with the bladed-cleat shoes (P < .01). The MidFF force-time integral was less in the running shoes (P < .01). Conclusions: Independent of shoe, men and women loaded the foot differently during a jump landing. The bladed cleat increased forefoot loading, which may increase the risk for forefoot injury. The type of shoe should be considered when choosing footwear for athletes returning to activity after metatarsal stress fractures.

Plantar Loading Characteristics During Walking in Females With and Without Patellofemoral Pain

2015 ◽  
Vol 105 (1) ◽  
pp. 1-7 ◽  
Author(s):  
John D. Willson ◽  
Eric D. Ellis ◽  
Thomas W. Kernozek
Keyword(s):  
Contact Area ◽  
Patellofemoral Pain ◽  
Peak Force ◽  
First Metatarsal ◽  
Time Integral ◽  
Foot Pronation ◽  
Force Time ◽  
Arch Index ◽  
Plane Joint ◽  
Force Time Integral

Background Patellofemoral pain (PFP) is a common injury, particularly in females. Foot pronation may promote knee and hip transverse plane joint kinematics during gait thought to contribute to PFP. Greater knowledge of plantar loading characteristics in females with PFP may be valuable to provide a basis for clinical decisions regarding footwear and foot orthoses. The purpose of this study was to compare plantar loading distribution in females with and without PFP during gait. Methods Plantar pressure during walking was recorded from 19 females with PFP and 20 females without PFP. Contact area, peak force, and force-time integral were evaluated in ten plantar areas. Arch index was also calculated from contact area data during gait. Results Contact area in females with PFP was 9% smaller in the first metatarsal region (P = .039) and 20% smaller in the midfoot region (P = .042) than in females without PFP. Peak force was 31% lower in the midfoot region for females with PFP (P = .027) and 13% lower in the first metatarsal region (P = .064). Force-time integral was 18% lower in the first metatarsal region in females with PFP (P = .024). Females with PFP demonstrated a lower arch index (suggesting a higher arch) (P = .028). Conclusions Decreased medial forefoot loading and decreased midfoot contact suggest decreased foot pronation during gait in females with PFP relative to females without PFP. Decreased foot pronation may foster increased patellofemoral joint loading rates. These data contribute to rationale for footwear modifications to modify plantar loading characteristics in people experiencing PFP.

scholarly journals Lower limb kinetic comparisons between the chasse step and one step footwork during stroke play in table tennis

PeerJ ◽  
2021 ◽  
Vol 9 ◽  
pp. e12481
Author(s):  
Yuqi He ◽  
Dong Sun ◽  
Xiaoyi Yang ◽  
Gusztáv Fekete ◽  
Julien S. Baker ◽  
...  
Keyword(s):  
Lower Limb ◽  
Peak Pressure ◽  
Table Tennis ◽  
Time Integral ◽  
Pressure Time ◽  
One Step ◽  
Force Time ◽  
The One ◽  
Plantar Force ◽  
Force Time Integral

Background Biomechanical footwork research during table tennis performance has been the subject of much interest players and exercise scientists. The purpose of this study was to investigate the lower limb kinetic characteristics of the chasse step and one step footwork during stroke play using traditional discrete analysis and one-dimensional statistical parameter mapping. Methods Twelve national level 1 table tennis players (Height: 172 ± 3.80 cm, Weight: 69 ± 6.22 kg, Age: 22 ± 1.66 years, Experience: 11 ± 1.71 year) from Ningbo University volunteered to participate in the study. The kinetic data of the dominant leg during the chasse step and one step backward phase (BP) and forward phase (FP) was recorded by instrumented insole systems and a force platform. Paired sample T tests were used to analyze maximum plantar force, peak pressure of each plantar region, the force time integral and the pressure time integral. For SPM analysis, the plantar force time series curves were marked as a 100% process. A paired-samples T-test in MATLAB was used to analyze differences in plantar force. Results One step produced a greater plantar force than the chasse step during 6.92–11.22% BP (P = 0.039). The chasse step produced a greater plantar force than one step during 53.47–99.01% BP (P < 0.001). During the FP, the chasse step showed a greater plantar force than the one step in 21.06–84.06% (P < 0.001). The one step produced a higher maximum plantar force in the BP (P = 0.032) and a lower maximum plantar force in the FP (P = 0) compared with the chasse step. The one step produced greater peak pressure in the medial rearfoot (P = 0) , lateral rearfoot (P = 0) and lateral forefoot (P = 0.042) regions than the chasse step during BP. In FP, the chasse step showed a greater peak pressure in the Toe (P = 0) than the one step. The one step had a lower force time integral (P = 0) and greater pressure time integral (P = 0) than the chasse step in BP, and the chasse step produced a greater force time integral (P = 0) and pressure time integral (P = 0.001) than the one step in the FP. Conclusion The findings indicate that athletes can enhance plantarflexion function resulting in greater weight transfer, facilitating a greater momentum during the 21.06–84.06% of FP. This is in addition to reducing the load on the dominant leg during landing by utilizing a buffering strategy. Further to this, consideration is needed to enhance the cushioning capacity of the sole heel and the stiffness of the toe area.

scholarly journals Foot Posture and Plantar Loading With Ankle Bracing

2021 ◽  
Vol 56 (5) ◽  
pp. 461-472
Author(s):  
Laura C. Dickerson ◽  
Robin M. Queen
Keyword(s):  
Contact Area ◽  
Repeated Measures ◽  
Center Of Pressure ◽  
Maximum Force ◽  
Medial Side ◽  
Time Integral ◽  
Foot Posture ◽  
Force Time ◽  
Force Time Integral ◽  
Ankle Bracing

Context Arch height is one important aspect of foot posture. An estimated 20% of the population has pes planus and 20% has pes cavus. These abnormal foot postures can alter lower extremity kinematics and plantar loading and contribute to injury risk. Ankle bracing is commonly used in sport to prevent these injuries, but no researchers have examined the effects of ankle bracing on plantar loading. Objective To evaluate the effects of ankle braces on plantar loading during athletic tasks. Design Cross-sectional study. Setting Laboratory. Patients or Other Participants A total of 36 participants (11 men, 25 women; age = 23.1 ± 2.5 years, height = 1.72 ± 0.09 m, mass = 66.3 ± 14.7 kg) were recruited for this study. Intervention(s) Participants completed walking, running, and cutting tasks in 3 bracing conditions: no brace, lace-up ankle-support brace, and semirigid brace. Main Outcome Measure(s) We analyzed the plantar-loading variables of contact area, maximum force, and force-time integral for 2 midfoot and 3 forefoot regions and assessed the displacement of the center of pressure. A 3 × 3 mixed-model repeated-measures analysis of variance was used to determine the effects of brace and foot type (α = .05). Results Foot type affected force measures in the middle (P range = .003–.047) and the medial side of the foot (P range = .004–.04) in all tasks. Brace type affected contact area in the medial midfoot during walking (P = .005) and cutting (P = .01) tasks, maximum force in the medial and lateral midfoot during all tasks (P &lt; .001), and force-time integral in the medial midfoot during all tasks (P &lt; .001). Portions of the center-of-pressure displacement were affected by brace wear in both the medial-lateral and anterior-posterior directions (P range = .001–.049). Conclusions Ankle braces can be worn to redistribute plantar loading. Additional research should be done to evaluate their effectiveness in injury prevention.

Reduction of Peak Pressure on the Forefoot with a Rigid Rocker-Bottom Postoperative Shoe

2001 ◽  
Vol 91 (10) ◽  
pp. 501-507 ◽  
Author(s):  
Eric Fuller ◽  
Stephen Schroeder ◽  
Jenifer Edwards
Keyword(s):  
Peak Pressure ◽  
Time Integral ◽  
Force Time ◽  
Injury Protection ◽  
Peak Pressures ◽  
Force Time Integral

An ideal postoperative shoe should be comfortable to wear and protect the foot during recovery from surgery or injury. Protection is assumed to be related to peak pressure and force-time integral under the foot. This study compared a commonly used postoperative shoe with a new postoperative shoe that incorporates a rigid sole with an 11° rocker bottom. The new postoperative shoe significantly reduced peak pressures on the forefoot by 20%. The amount of pressure and force-time integral reduction is compared with other values found in the literature for various shoe modifications. Indications for rocker-bottom shoes are also explored. (J Am Podiatr Med Assoc 91(10): 501-507, 2001)

scholarly journals A Pilot Study of the Effect of Outsole Hardness on Lower Limb Kinematics and Kinetics during Soccer Related Movements

2017 ◽  
Vol 57 (1) ◽  
pp. 17-27 ◽  
Author(s):  
Dong Sun ◽  
Qichang Mei ◽  
Julien S Baker ◽  
Xuewen Jia ◽  
Yaodong Gu
Keyword(s):  
Stance Phase ◽  
Loading Rate ◽  
Peak Pressure ◽  
Artificial Turf ◽  
Time Integral ◽  
Limb Kinematics ◽  
Force Time ◽  
Lower Limb Kinematics ◽  
Kinematics And Kinetics ◽  
Force Time Integral

AbstractThe purpose of this study was to investigate the effect of different outsole hardness of turf cleats shoes on the lower limb kinematics and kinetics of soccer players playing on artificial turf. The participants were required to complete tasks of straight running and 45° left sidestep cutting movements, respectively, at the speed of 4.5 ± 0.2 m/s on artificial turf. They were asked to randomly select turf cleats shoes with a soft outsole (SO), medium hardness outsole (MO) and hard outsole (HO). During the stance phase of straight running, peak pressure and force-time integral in medial forefoot (MFF) of players wearing cleats shoes with MO were significantly higher than those wearing cleats shoes with SO. During the stance phase of a 45° cutting maneuver, players wearing cleats shoes with SO showed significantly higher peak knee flexion and abduction angles than the HO group. Players wearing cleats shoes with SO also showed higher ankle dorsiflexion and inversion angles compared with those wearing cleats shoes with HO. The vertical average loading rate (VALR) as well as peak pressure and force-time integral in the heel (H) and lateral forefoot (LFF) regions of players wearing cleats shoes with HO were significantly higher than those wearing shoes with SO. On the contrary, peak pressure and force-time integral of players wearing shoes with SO were significantly higher than those wearing shoes with HO in MFF. A higher vertical loading rate and plantar pressure of some areas may increase the potential risk of metatarsal stress fractures and plantar fasciitis. Therefore, this finding about turf cleats shoes could give some theoretic support for the design of turf cleats shoes and material optimization in the future.

scholarly journals Force-time integral decreases with ejection despite constant oxygen consumption and pressure-volume area in dog left ventricle.

1987 ◽  
Vol 60 (6) ◽  
pp. 797-803 ◽  
Author(s):  
H Suga ◽  
Y Goto ◽  
T Nozawa ◽  
Y Yasumura ◽  
S Futaki ◽  
...  
Keyword(s):  
Oxygen Consumption ◽  
Left Ventricle ◽  
Time Integral ◽  
Force Time ◽  
Force Time Integral

The Effect of Muscle Lentgh on Force-Time Integral in Relation to Energy-Rich Phosphate Consumption

1985 ◽  
pp. 605-610 ◽  
Author(s):  
A. De Haan ◽  
J. E. Van Doorn ◽  
P. A. Huijing ◽  
R. D. Woittiez ◽  
H. G. Westra
Keyword(s):  
Time Integral ◽  
Force Time ◽  
Force Time Integral

Regulation of energy consumption in cardiac muscle: analysis of isometric contractions

1999 ◽  
Vol 276 (3) ◽  
pp. H998-H1011 ◽  
Author(s):  
Amir Landesberg ◽  
Samuel Sideman
Keyword(s):  
Energy Consumption ◽  
Cardiac Muscle ◽  
Feedback Mechanism ◽  
Isometric Contractions ◽  
Cross Bridge ◽  
Time Integral ◽  
Length Relationship ◽  
Cross Bridges ◽  
Force Time ◽  
Force Time Integral

The well-known linear relationship between oxygen consumption and force-length area or the force-time integral is analyzed here for isometric contractions. The analysis, which is based on a biochemical model that couples calcium kinetics with cross-bridge cycling, indicates that the change in the number of force-generating cross bridges with the change in the sarcomere length depends on the force generated by the cross bridges. This positive-feedback phenomenon is consistent with our reported cooperativity mechanism, whereby the affinity of the troponin for calcium and, hence, cross-bridge recruitment depends on the number of force-generating cross bridges. Moreover, it is demonstrated that a model that does not include a feedback mechanism cannot describe the dependence of energy consumption on the loading conditions. The cooperativity mechanism, which has been shown to determine the force-length relationship and the related Frank-Starling law, is shown here to provide the basis for the regulation of energy consumption in the cardiac muscle.

Preload does not influence nonmechanical O2 consumption in isolated rabbit heart

1994 ◽  
Vol 266 (3) ◽  
pp. H1047-H1054 ◽  
Author(s):  
A. Higashiyama ◽  
M. W. Watkins ◽  
Z. Chen ◽  
M. M. LeWinter
Keyword(s):  
Energy Consumption ◽  
Diastolic Pressure ◽  
Rabbit Heart ◽  
Left Ventricular ◽  
Energetic Cost ◽  
O2 Consumption ◽  
Time Integral ◽  
Force Time ◽  
Whole Heart ◽  
Force Time Integral

Myocardial energy consumption for nonmechanical activity (excitation-contraction coupling) has been shown to be length dependent in isolated muscle studies but no more than minimally affected by preload in the whole heart. However, unloaded O2 consumption (VO2, which is used to estimate nonmechanical VO2 in whole heart) may not be accurate for quantifying nonmechanical energy consumption, because it contains VO2 for residual cross-bridge cycling. To more accurately determine the influence of left ventricular (LV) diastolic volume on nonmechanical VO2 in whole heart, we employed a new method for quantifying nonmechanical VO2, using the drug 2,3-butanedione monoxime (BDM). We measured VO2 and force-time integral during infusion of BDM (< or = 5 mM) at high (VH) and low LV volumes (VL) in 16 excised isovolumically contracting red blood cell-perfused rabbit ventricles. LV end-diastolic pressure was 9.7 +/- 4.6 and 3.8 +/- 2.8 (SD) mmHg at VH and VL, respectively. Nonmechanical VO2, estimated as the VO2-axis intercept of the linear VO2-force-time integral relation obtained during BDM infusion, did not differ significantly between VH and VL (0.0137 +/- 0.0083 and 0.0132 +/- 0.0090 ml O2.beat-1 x 100 gLV-1, P = 0.702). A multiple linear regression analysis for the pooled data confirmed this finding (P = 0.361). We conclude that, in the rabbit heart, LV diastolic volume does not importantly affect nonmechanical energy consumption over a physiological range of LV end-diastolic pressure. This indicates that length-dependent activation does not have an energetic cost in whole rabbit heart and suggests that its predominant mechanism is increased Ca2+ affinity for the contractile proteins.

Sign in / Sign up

Export Citation Format

Share Document