scholarly journals Formulation and evaluation of sustained release matrix tablets of pioglitazone hydrochloride using processed Aloe vera mucilage as release modifier

2015 ◽  
Vol 6 (1) ◽  
pp. 5 ◽  
Author(s):  
Divya Bansal ◽  
Manoj Choudhary ◽  
Nazneen Dubey ◽  
Aditya Ganeshpurkar ◽  
Vikas Pandey ◽  
...  
Keyword(s):  
Sustained Release ◽  
Aloe Vera ◽  
Matrix Tablets

Effects of release modifier on Carvedilol release from Kollidon SR based matrix

2012 ◽  
Vol 1 (8) ◽  
pp. 186 ◽  
Author(s):  
Urmi Das ◽  
Mohammad Salim Hossain
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Microcrystalline Cellulose ◽  
Matrix Tablets ◽  
Dissolution Time ◽  
Release Mechanism ◽  
Matrix Tablet ◽  
Weight Variation ◽  
The Matrix ◽  
Tablet Formulations

<p>Sustained release Carvedilol matrix tablets constituting Kollidon SR were developed in this study in an attempt to investigate the effect of release modifiers on the release profile of Carvedilol from matrix. Three matrix tablet formulations were prepared by direct compression of Kollidon SR in combination with release modifier (HPMC and Microcrystalline Cellulose) and magnesium stearate. Tablets containing only Kollidon SR with the active ingredient demonstrated a rapid rate of drug release. Incorporation of HPMC in the matrix tablet prolonged the release of drug but incorporation of Microcrystalline Cellulose showed superimposable release pattern with an initial burst effect as confirmed by mean dissolution time and Higuchi release rate data. After 7 hours of dissolution, Carvedilol release from the matrix systems were 91.42%, 83.41%, from formulation F1 and F2 respectively. Formulation F3 exhibited 100 % release at 4 hours. All the tablet formulations showed acceptable pharmaco-technical properties and complied with the in-house specifications for tablet weight variation, friability, hardness, thickness, and diameter. Prepared tablets also showed sustained release property for carvedilol. The drug release mechanism from the matrix tablets of F1 and F2 was found to be followed by Fickian and F3 by Non-Fickian mechanism.</p><p>DOI: <a href="http://dx.doi.org/10.3329/icpj.v1i8.11095">http://dx.doi.org/10.3329/icpj.v1i8.11095</a></p> <p>International Current Pharmaceutical Journal 2012, 1(8): 186-192</p>

scholarly journals Development and Bio-Predictive Evaluation of Biopharmaceutical Properties of Sustained-Release Tablets with a Novel GPR40 Agonist for a First-in-Human Clinical Trial

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 804
Author(s):  
Ewelina Juszczyk ◽  
Kamil Kisło ◽  
Paweł Żero ◽  
Ewa Tratkiewicz ◽  
Maciej Wieczorek ◽  
...  
Keyword(s):  
Clinical Trial ◽  
Sustained Release ◽  
Development Strategy ◽  
Matrix Tablets ◽  
Matrix Tablet ◽  
Mechanical Agitation ◽  
Development Cycle ◽  
Dissolution Tests ◽  
Sustained Release Tablets ◽  
Biopharmaceutical Properties

Sustained-release (SR) formulations may appear advantageous in first-in-human (FIH) study of innovative medicines. The newly developed SR matrix tablets require prolonged maintenance of API concentration in plasma and should be reliably assessed for the risk of uncontrolled release of the drug. In the present study, we describe the development of a robust SR matrix tablet with a novel G-protein-coupled receptor 40 (GPR40) agonist for first-in-human studies and introduce a general workflow for the successful development of SR formulations for innovative APIs. The hydrophilic matrix tablets containing the labeled API dose of 5, 30, or 120 mg were evaluated with several methods: standard USP II dissolution, bio-predictive dissolution tests, and the texture and matrix formation analysis. The standard dissolution tests allowed preselection of the prototypes with the targeted dissolution rate, while the subsequent studies in physiologically relevant conditions revealed unwanted and potentially harmful effects, such as dose dumping under an increased mechanical agitation. The developed formulations were exceptionally robust toward the mechanical and physicochemical conditions of the bio-predictive tests and assured a comparable drug delivery rate regardless of the prandial state and dose labeled. In conclusion, the introduced development strategy, when implemented into the development cycle of SR formulations with innovative APIs, may allow not only to reduce the risk of formulation-related failure of phase I clinical trial but also effectively and timely provide safe and reliable medicines for patients in the trial and their further therapy.

scholarly journals Formulation and evaluation of bi-layer floating tablets of ziprasidone HCl and trihexyphenidyl HCl

2011 ◽  
Vol 47 (3) ◽  
pp. 545-553 ◽  
Author(s):  
Sathis Kumar Dinakaran ◽  
Santhos Kumar ◽  
David Banji ◽  
Harani Avasarala ◽  
Venkateshwar Rao
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Chemical Properties ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Floating Tablets ◽  
Ir Studies ◽  
Weight Variation ◽  
The Matrix

The purpose of this research study was to establish ziprasidone HCl NR 40 mg and trihexyphenidyl HCl SR 4mg in the form of bi-layer sustained release floating tablets. The tablets were prepared using sodium HPMC K4M / HPMC K15M as bio-adhesive polymers and sodium bicarbonate acting as a floating layer. Tablets were evaluated based on different parameters such as thickness, hardness, friability, weight variation, in vitro dissolution studies, content of active ingredient and IR studies. The physico-chemical properties of the finished product complied with the specifications. In vitro release from the formulation was studied as per the USP XXIII dissolution procedure. The formulations gave a normal release effect followed by sustained release for 12 h which indicates bimodal release of ziprasidone HCl from the matrix tablets. The data obtained was fitted to Peppas models. Analysis of n values of the Korsmeyer equation indicated that the drug release involved non-diffusional mechanisms. By the present study, it can be concluded that bi-layer tablets of ziprasidone HCl and trihexyphenidyl HCl will be a useful strategy for extending the metabolism and improving the bioavailability of Ziprasidone HCl and Trihexyphenidyl HCl.

Evaluation of Guar Gum in the Preparation of Sustained-Release Matrix Tablets

1998 ◽  
Vol 24 (11) ◽  
pp. 1095-1099 ◽  
Author(s):  
Praveen Khullar ◽  
Roop K. Khar ◽  
Suraj P. Agarwal
Keyword(s):  
Sustained Release ◽  
Guar Gum ◽  
Matrix Tablets

scholarly journals In vitro Release Kinetics Study of Ranolazine from Swellable Hydrophilic Matrix Tablets

1970 ◽  
Vol 8 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Mohammad Nezab Uddin ◽  
Ishtiaq Ahmed ◽  
Monzurul Amin Roni ◽  
Muhammad Rashedul Islam ◽  
Mohammad Habibur Rahman ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
High Viscosity ◽  
Matrix Tablets ◽  
Release Studies ◽  
The Matrix ◽  
Vitro Release

The objective of this study was to design oral sustained release matrix tablets of Ranolazine usinghydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of formulation factors suchas polymer proportion and polymer viscosity on the release of drug. In vitro release studies were performed usingUSP type II apparatus (paddle method) in 900 mL of 0.1N HCl at 100 rpm for 12 hours. The release kinetics wasanalyzed using the zero-order, first order, Higuchi and Korsmeyer-Peppas equations to explore and explain themechanism of drug release from the matrix tablets. In vitro release studies revealed that the release rate decreasedwith increase in polymer proportion and viscosity grade. Mathematical analysis of the release kinetics indicated thatthe nature of drug release from the matrix tablets was dependent on drug diffusion and polymer relaxation andtherefore followed non-Fickian or anomalous release. The developed controlled release matrix tablets of Ranolazineprepared with high viscosity HPMC extended release up to 12 hours.Key words: Ranolazine; Sustained release; Methocel E50 Premium LV; Methocel K100LV CR; Methocel K4M CR;Methocel K15M CR.DOI: 10.3329/dujps.v8i1.5333Dhaka Univ. J. Pharm. Sci. 8(1): 31-38, 2009 (June)

scholarly journals The Effect of Manufacturing Methods and Different Shapes on the Release Pattern of Diclofenac Sodium Matrix Tablet

1970 ◽  
Vol 2 (2) ◽  
pp. 76-80
Author(s):  
Tajnin Ahmed ◽  
Muhammad Shahidul Islam ◽  
Tasnuva Haque ◽  
Mohammad Abusyed
Keyword(s):  
Sustained Release ◽  
Release Rate ◽  
Diclofenac Sodium ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Compression Method ◽  
Release Pattern ◽  
Peg 600

In the present study sustained release diclofenac sodium matrix tablets were prepared using Kollidon SR polymer. Hydroxypropyl methylcellulose (HPMC 15 cps) and poly ethylene glycol (PEG-600) polymers respectively were used in formulating tablets prepared by direct compression and wet granulation methods. The polymers were used to explore the release pattern of the drug into the dissolution media. The tablets were also prepared in various shapes (caplet oval, round oval and flat oval). A comparatively higher release rate of drug was obtained from the polymer HPMC 15 cps at 10% concentration for directly compressed matrix tablet than those containing 20% of HPMC after a definite period of time. In wet granulation process, 10% PEG-600 containing tablets showed a better release than those containing 20% PEG. The drug release was also found to be sustained in case of wet granulation method than that of the direct compression method. Again the caplet shaped tablets in case of direct compression method showed better release rate of drug than those of the round oval and flat oval shaped tablets. Thus the result of this study shows that the proper selection of the percentage of polymer and the suitable shape of tablet and proper manufacturing method can provide a greater opportunity in designing sustained release dosage forms. Key words: Matrix tablet; release pattern; direct compression; wet granulation; PEG 600; Kollidon SR.DOI: 10.3329/sjps.v2i2.5828Stamford Journal of Pharmaceutical Sciences Vol.2(2) 2009: 76-80

scholarly journals FORMULATION AND EVALUATION OF SUSTAINED RELEASE MATRIX TABLET OF LORNOXICAM BY DIRECT COMPRESSION METHOD

2021 ◽  
Vol 10 (5) ◽  
pp. 131-136
Author(s):  
Asim pasha ◽  
C N Somashekhar
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Prolonged Release ◽  
Matrix Tablet ◽  
Direct Compression ◽  
Dissolution Profile ◽  
Drug Content

The aim of the present work was to develop sustained release Lornoxicam matrix tablets with polymers like HPMC K15M, Ethyl cellulose, and Crospovidone as carriers in varying quantities. Direct compression was used to make matrix tablets. Various assessment parameters, such as hardness, friability, thickness, percent drug content, weight variation, and so on, were applied to the prepared formulations. In vitro dissolution studies were carried out for 24 hrs. The tablets were subjected to in-vitro drug release in (pH 1.2) for first 2 hrs. Then followed by (pH 6.8) phosphate buffer for next 22 hrs. And the results showed that among the six formulations FL3 showed good dissolution profile to control the drug release respectively. The drug and polymer compatibility were tested using FT-IR spectroscopy, which revealed that the drug was compatible with all polymers. It is also required to design an appropriate prolonged release formulation for Lornoxicam in order to maintain the drug's release. Hence by using the compatible polymers sustained release tablets were formulated and subjected for various types of evaluation parameters like friability, hardness, drug content and dissolution behaviour. Finally, the findings reveal that the prepared sustained release matrix tablets of lornoxicam have improved efficacy and patient compliance.

scholarly journals Formulation and Evaluation of Eplerenone Matrix Tablets using Aloe Vera, Guar Gum and Povidone K-30

2018 ◽  
Vol 8 (1) ◽  
pp. 49
Author(s):  
P. Bharghava Bhushan Rao ◽  
A. Lakshmana Rao ◽  
K. Ravi Kumar ◽  
K. Sowmya ◽  
S. Kameswara Rao
Keyword(s):  
Guar Gum ◽  
Aloe Vera ◽  
Matrix Tablets

scholarly journals A REVIEW ON DISINTEGRATION CONTROL MATRIX TABLETS

2018 ◽  
Vol 8 (5) ◽  
pp. 19-22
Author(s):  
Pralhad K. Kanke ◽  
Pankaj Sawant ◽  
Ajit Jadhav ◽  
Md. Rageeb Md. Usman
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Solid Dispersion ◽  
Gastrointestinal Transit ◽  
Matrix Tablets ◽  
Surface Erosion ◽  
Matrix Tablet ◽  
Control Matrix ◽  
Dispersion Technique ◽  
Wax Coating

A number of sustained release formulations are available in the market which successfully sustained the drug release over a prolonged period of time by different mechanisms. The new approach for sustaining the drug release is disintegration control matrix tablet which sustained the drug release up to 24hrs by controlling the disintegration rate of tablet. Disintegration control matrix tablet (DCMT) mainly forms the granules containing drug and disintegrating agent such as low substituted hydroxyl propyl cellulose by various methods such as solid dispersion technique. The sustained release of drug is maintained by increasing the wax coating or decreasing the amount of disintegrants. The release of drug from tablet is uniform throughout till all the drug releases from tablet as it involves drug release by diffusion, dissolution and surface erosion mechanism. DCMT increases the solubility of drug and improves the bioavailability without disturbing gastrointestinal transit. BCS Class II, III, IV drugs are the best candidate for DCMT formulations. Keywords: Disintegration control matrix tablet (DCMT), Wax, Disintegrating agent, Solid dispersion.

Sign in / Sign up

Export Citation Format

Share Document