Loop Transformation for Nested Loops with n-dimensional Space

2013 ◽  
Vol 5 (11) ◽  
pp. 517-523
Author(s):  
Jeong ◽  
Samjin
Keyword(s):  
Dimensional Space ◽  
Loop Transformation ◽  
Nested Loops

The motion of a lunar orbiter

1966 ◽  
Vol 25 ◽  
pp. 373
Author(s):  
Y. Kozai
Keyword(s):  
Degrees Of Freedom ◽  
Dimensional Space ◽  
Artificial Satellite ◽  
Equations Of Motion ◽  
Triaxial Ellipsoid ◽  
The Moon ◽  
Secular Motion ◽  
The Earth ◽  
Close Satellite ◽  
The Mean

The motion of an artificial satellite around the Moon is much more complicated than that around the Earth, since the shape of the Moon is a triaxial ellipsoid and the effect of the Earth on the motion is very important even for a very close satellite.The differential equations of motion of the satellite are written in canonical form of three degrees of freedom with time depending Hamiltonian. By eliminating short-periodic terms depending on the mean longitude of the satellite and by assuming that the Earth is moving on the lunar equator, however, the equations are reduced to those of two degrees of freedom with an energy integral.Since the mean motion of the Earth around the Moon is more rapid than the secular motion of the argument of pericentre of the satellite by a factor of one order, the terms depending on the longitude of the Earth can be eliminated, and the degree of freedom is reduced to one.Then the motion can be discussed by drawing equi-energy curves in two-dimensional space. According to these figures satellites with high inclination have large possibilities of falling down to the lunar surface even if the initial eccentricities are very small.The principal properties of the motion are not changed even if plausible values ofJ3andJ4of the Moon are included.This paper has been published in Publ. astr. Soc.Japan15, 301, 1963.

Three Dimensional structure and organization of diploid chromosomes by optical section microscopy

1987 ◽  
Vol 45 ◽  
pp. 633-635
Author(s):  
David A. Agard ◽  
Yasushi Hiraoka ◽  
John W. Sedat
Keyword(s):  
Dimensional Space ◽  
Three Dimensional ◽  
Developmental State ◽  
Mitotic Cell ◽  
Biological Properties ◽  
Dimensional Structure ◽  
Specific Gene ◽  
Three Dimensional Structure ◽  
Complementary Techniques ◽  
Dynamic Structures

In an effort to understand the complex relationship between structure and biological function within the nucleus, we have embarked on a program to examine the three-dimensional structure and organization of Drosophila melanogaster embryonic chromosomes. Our overall goal is to determine how DNA and proteins are organized into complex and highly dynamic structures (chromosomes) and how these chromosomes are arranged in three dimensional space within the cell nucleus. Futher, we hope to be able to correlate structual data with such fundamental biological properties as stage in the mitotic cell cycle, developmental state and transcription at specific gene loci.Towards this end, we have been developing methodologies for the three-dimensional analysis of non-crystalline biological specimens using optical and electron microscopy. We feel that the combination of these two complementary techniques allows an unprecedented look at the structural organization of cellular components ranging in size from 100A to 100 microns.

Diffraction contrast of dislocations in icosahedral quasicrystals

1990 ◽  
Vol 48 (4) ◽  
pp. 454-455
Author(s):  
K. Urban ◽  
Z. Zhang ◽  
M. Wollgarten ◽  
D. Gratias
Keyword(s):  
Dimensional Space ◽  
Three Dimensional ◽  
Complete Characterization ◽  
Extinction Condition ◽  
Burgers Vector ◽  
Diffraction Contrast ◽  
Lattice Geometry ◽  
Reference Space ◽  
Icosahedral Quasicrystals ◽  
The One

Recently dislocations have been observed by electron microscopy in the icosahedral quasicrystalline (IQ) phase of Al65Cu20Fe15. These dislocations exhibit diffraction contrast similar to that known for dislocations in conventional crystals. The contrast becomes extinct for certain diffraction vectors g. In the following the basis of electron diffraction contrast of dislocations in the IQ phase is described. Taking account of the six-dimensional nature of the Burgers vector a “strong” and a “weak” extinction condition are found.Dislocations in quasicrystals canot be described on the basis of simple shear or insertion of a lattice plane only. In order to achieve a complete characterization of these dislocations it is advantageous to make use of the one to one correspondence of the lattice geometry in our three-dimensional space (R3) and that in the six-dimensional reference space (R6) where full periodicity is recovered . Therefore the contrast extinction condition has to be written as gpbp + gobo = 0 (1). The diffraction vector g and the Burgers vector b decompose into two vectors gp, bp and go, bo in, respectively, the physical and the orthogonal three-dimensional sub-spaces of R6.

Flavin radicals, conformational sampling and robust design principles in interprotein electron transfer: the trimethylamine dehydrogenase-electron-transferring flavoprotein complex

2004 ◽  
Vol 71 ◽  
pp. 1-14
Author(s):  
David Leys ◽  
Jaswir Basran ◽  
François Talfournier ◽  
Kamaldeep K. Chohan ◽  
Andrew W. Munro ◽  
...  
Keyword(s):  
Electron Transfer ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Kinetic Studies ◽  
Molecular Assembly ◽  
Conformational Sampling ◽  
Trimethylamine Dehydrogenase ◽  
Key Residues ◽  
Electron Transferring Flavoprotein ◽  
Electron Transfer Complex

TMADH (trimethylamine dehydrogenase) is a complex iron-sulphur flavoprotein that forms a soluble electron-transfer complex with ETF (electron-transferring flavoprotein). The mechanism of electron transfer between TMADH and ETF has been studied using stopped-flow kinetic and mutagenesis methods, and more recently by X-ray crystallography. Potentiometric methods have also been used to identify key residues involved in the stabilization of the flavin radical semiquinone species in ETF. These studies have demonstrated a key role for 'conformational sampling' in the electron-transfer complex, facilitated by two-site contact of ETF with TMADH. Exploration of three-dimensional space in the complex allows the FAD of ETF to find conformations compatible with enhanced electronic coupling with the 4Fe-4S centre of TMADH. This mechanism of electron transfer provides for a more robust and accessible design principle for interprotein electron transfer compared with simpler models that invoke the collision of redox partners followed by electron transfer. The structure of the TMADH-ETF complex confirms the role of key residues in electron transfer and molecular assembly, originally suggested from detailed kinetic studies in wild-type and mutant complexes, and from molecular modelling.

Non-Linear Dynamics of Cardiovascular Variability Signals

1994 ◽  
Vol 33 (01) ◽  
pp. 81-84 ◽  
Author(s):  
S. Cerutti ◽  
S. Guzzetti ◽  
R. Parola ◽  
M.G. Signorini
Keyword(s):  
Dimensional Space ◽  
Severe Heart Failure ◽  
Parametric Models ◽  
Deterministic Systems ◽  
Finite Dimensional ◽  
Return Maps ◽  
Pathological Conditions ◽  
Non Linear ◽  
Space State

Abstract:Long-term regulation of beat-to-beat variability involves several different kinds of controls. A linear approach performed by parametric models enhances the short-term regulation of the autonomic nervous system. Some non-linear long-term regulation can be assessed by the chaotic deterministic approach applied to the beat-to-beat variability of the discrete RR-interval series, extracted from the ECG. For chaotic deterministic systems, trajectories of the state vector describe a strange attractor characterized by a fractal of dimension D. Signals are supposed to be generated by a deterministic and finite dimensional but non-linear dynamic system with trajectories in a multi-dimensional space-state. We estimated the fractal dimension through the Grassberger and Procaccia algorithm and Self-Similarity approaches of the 24-h heart-rate variability (HRV) signal in different physiological and pathological conditions such as severe heart failure, or after heart transplantation. State-space representations through Return Maps are also obtained. Differences between physiological and pathological cases have been assessed and generally a decrease in the system complexity is correlated to pathological conditions.

Analysis method ofrecruitment needs for the regional economy: Occupational section

2017 ◽  
pp. 142-149 ◽  
Author(s):  
E. Pitukhin ◽  
S. Shabaeva ◽  
I. Stepus ◽  
D. Moroz
Keyword(s):  
Cluster Analysis ◽  
Labor Market ◽  
Comparative Analysis ◽  
Regional Economy ◽  
Dimensional Space ◽  
Analysis Method ◽  
Scalar Form ◽  
Regional Labor Market ◽  
Regional Labor ◽  
Regional Specificity

The paper deals with comparative analysis of occupations in the regional labor market. Occupation is treated as a multi-dimensional space of characte- ristics, whereas a scalar form of a characteristic makes it possible to carry out a comparative analysis of occupations. Using cluster analysis of a pilot region indicators five meaningfully interpretable clusters of occupations were identified, reflecting their regional specificity.

Multi-Objective Design Problem of Tire Wear and Visualization of Its Pareto Solutions2

2006 ◽  
Vol 34 (3) ◽  
pp. 170-194 ◽  
Author(s):  
M. Koishi ◽  
Z. Shida
Keyword(s):  
Inverse Problems ◽  
Conceptual Design ◽  
Dimensional Space ◽  
Design Stage ◽  
Objective Functions ◽  
Pareto Solutions ◽  
Design Problems ◽  
Multi Objective ◽  
Design Engineers ◽  
Design Variables

Abstract Since tires carry out many functions and many of them have tradeoffs, it is important to find the combination of design variables that satisfy well-balanced performance in conceptual design stage. To find a good design of tires is to solve the multi-objective design problems, i.e., inverse problems. However, due to the lack of suitable solution techniques, such problems are converted into a single-objective optimization problem before being solved. Therefore, it is difficult to find the Pareto solutions of multi-objective design problems of tires. Recently, multi-objective evolutionary algorithms have become popular in many fields to find the Pareto solutions. In this paper, we propose a design procedure to solve multi-objective design problems as the comprehensive solver of inverse problems. At first, a multi-objective genetic algorithm (MOGA) is employed to find the Pareto solutions of tire performance, which are in multi-dimensional space of objective functions. Response surface method is also used to evaluate objective functions in the optimization process and can reduce CPU time dramatically. In addition, a self-organizing map (SOM) proposed by Kohonen is used to map Pareto solutions from high-dimensional objective space onto two-dimensional space. Using SOM, design engineers see easily the Pareto solutions of tire performance and can find suitable design plans. The SOM can be considered as an inverse function that defines the relation between Pareto solutions and design variables. To demonstrate the procedure, tire tread design is conducted. The objective of design is to improve uneven wear and wear life for both the front tire and the rear tire of a passenger car. Wear performance is evaluated by finite element analysis (FEA). Response surface is obtained by the design of experiments and FEA. Using both MOGA and SOM, we obtain a map of Pareto solutions. We can find suitable design plans that satisfy well-balanced performance on the map called “multi-performance map.” It helps tire design engineers to make their decision in conceptual design stage.

Topics in Quaternion Linear Algebra

2014 ◽  
Author(s):  
Leiba Rodman
Keyword(s):  
Linear Algebra ◽  
Complex Analysis ◽  
Dimensional Space ◽  
Applied Mathematics ◽  
Three Dimensional ◽  
Number System ◽  
Graduate Course ◽  
Open Problems ◽  
Unpublished Research ◽  
Reference Tool

Quaternions are a number system that has become increasingly useful for representing the rotations of objects in three-dimensional space and has important applications in theoretical and applied mathematics, physics, computer science, and engineering. This is the first book to provide a systematic, accessible, and self-contained exposition of quaternion linear algebra. It features previously unpublished research results with complete proofs and many open problems at various levels, as well as more than 200 exercises to facilitate use by students and instructors. Applications presented in the book include numerical ranges, invariant semidefinite subspaces, differential equations with symmetries, and matrix equations. Designed for researchers and students across a variety of disciplines, the book can be read by anyone with a background in linear algebra, rudimentary complex analysis, and some multivariable calculus. Instructors will find it useful as a complementary text for undergraduate linear algebra courses or as a basis for a graduate course in linear algebra. The open problems can serve as research projects for undergraduates, topics for graduate students, or problems to be tackled by professional research mathematicians. The book is also an invaluable reference tool for researchers in fields where techniques based on quaternion analysis are used.

Extension of the Spatial PDI Model to Three Dimensions

1997 ◽  
Vol 84 (1) ◽  
pp. 176-178
Author(s):  
Frank O'Brien
Keyword(s):  
Population Density ◽  
Dimensional Space ◽  
Finite Lattice ◽  
Three Dimensional ◽  
Upper Bounds ◽  
Three Dimensions ◽  
Lower And Upper Bounds ◽  
Density Index ◽  
Three Dimensional Space

The author's population density index ( PDI) model is extended to three-dimensional distributions. A derived formula is presented that allows for the calculation of the lower and upper bounds of density in three-dimensional space for any finite lattice.

Sign in / Sign up

Export Citation Format

Share Document