A Methodology for the Definition of Optimal Control Strategies of a VVT-Equipped SI Engine

Author(s):  
F. Bozza ◽  
M. Cardone ◽  
A. Gimelli ◽  
A. Senatore ◽  
R. Tuccillo
2021 ◽  
Author(s):  
Paolo Scarabaggio ◽  
Raffaele Carli ◽  
Graziana Cavone ◽  
Nicola Epicoco ◽  
Mariagrazia Dotoli

This paper proposes a stochastic non-linear model predictive controller to support policy-makers in determining robust optimal non-pharmaceutical strategies to tackle the COVID-19 pandemic waves. First, a time-varying <i>SIRCQTHE</i> epidemiological model is defined to get predictions on the pandemic dynamics. A stochastic model predictive control problem is then formulated to select the necessary control actions (i.e., restrictions on the mobility for different socio-economic categories) to minimize the socio-economic costs. In particular, considering the uncertainty characterizing this decision-making process, we ensure that the capacity of the healthcare system is not violated in accordance with a chance constraint approach. The effectiveness of the presented method in properly supporting the definition of diversified non-pharmaceutical strategies for tackling the COVID-19 spread is tested on the network of Italian regions using real data. The proposed approach can be easily extended to cope with other countries' characteristics and different levels of the spatial scale.<br><br><div><br></div><div>Postprint accepted for pubblication in <i>IEEE Transactions on Automation Science and Engineering</i> (T-ASE)</div><div><br></div><div><b>How to cite</b>: P. Scarabaggio, R. Carli, G. Cavone, N. Epicoco and M. Dotoli, (2021) "Non-Pharmaceutical Stochastic Optimal Control Strategies to Mitigate the COVID-19 Spread," in IEEE Transactions on Automation Science and Engineering.</div><div><br></div><div>DOI: http://doi.org/10.1109/TASE.2021.3111338<br><br></div>


1996 ◽  
Vol 118 (3) ◽  
pp. 482-488 ◽  
Author(s):  
Sergio Bittanti ◽  
Fabrizio Lorito ◽  
Silvia Strada

In this paper, Linear Quadratic (LQ) optimal control concepts are applied for the active control of vibrations in helicopters. The study is based on an identified dynamic model of the rotor. The vibration effect is captured by suitably augmenting the state vector of the rotor model. Then, Kalman filtering concepts can be used to obtain a real-time estimate of the vibration, which is then fed back to form a suitable compensation signal. This design rationale is derived here starting from a rigorous problem position in an optimal control context. Among other things, this calls for a suitable definition of the performance index, of nonstandard type. The application of these ideas to a test helicopter, by means of computer simulations, shows good performances both in terms of disturbance rejection effectiveness and control effort limitation. The performance of the obtained controller is compared with the one achievable by the so called Higher Harmonic Control (HHC) approach, well known within the helicopter community.


Agronomy ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 85
Author(s):  
Jorge Lopez-Jimenez ◽  
Nicanor Quijano ◽  
Alain Vande Wouwer

Climate change and the efficient use of freshwater for irrigation pose a challenge for sustainable agriculture. Traditionally, the prediction of agricultural production is carried out through crop-growth models and historical records of the climatic variables. However, one of the main flaws of these models is that they do not consider the variability of the soil throughout the cultivation area. In addition, with the availability of new information sources (i.e., aerial or satellite images) and low-cost meteorological stations, it is convenient that the models incorporate prediction capabilities to enhance the representation of production scenarios. In this work, an agent-based model (ABM) that considers the soil heterogeneity and water exchanges is proposed. Soil heterogeneity is associated to the combination of individual behaviours of uniform portions of land (agents), while water fluxes are related to the topography. Each agent is characterized by an individual dynamic model, which describes the local crop growth. Moreover, this model considers positive and negative effects of water level, i.e., drought and waterlogging, on the biomass production. The development of the global ABM is oriented to the future use of control strategies and optimal irrigation policies. The model is built bottom-up starting with the definition of agents, and the Python environment Mesa is chosen for the implementation. The validation is carried out using three topographic scenarios in Colombia. Results of potential production cases are discussed, and some practical recommendations on the implementation are presented.


1986 ◽  
Vol 108 (4) ◽  
pp. 330-339 ◽  
Author(s):  
M. A. Townsend ◽  
D. B. Cherchas ◽  
A. Abdelmessih

This study considers the optimal control of dry bulb temperature and moisture content in a single zone, to be accomplished in such a way as to be implementable in any zone of a multi-zone system. Optimality is determined in terms of appropriate cost and performance functions and subject to practical limits using the maximum principle. Several candidate optimal control strategies are investigated. It is shown that a bang-bang switching control which is theoretically periodic is a least cost practical control. In addition, specific attributes of this class of problem are explored.


2013 ◽  
Vol 671-674 ◽  
pp. 2515-2519
Author(s):  
Xue Mei Wang ◽  
Zhen Hai Wang ◽  
Xing Long Wu

This project aims to study the optimal control model of the ice-storage system which is theoretically close to the optimal control and also applicable to actual engineering. Using Energy Plus, the energy consumption simulation software, and the simple solution method of optimal control, researchers can analyze and compare the annual operation costs of the ice-storage air-conditioning system of a project in Beijing under different control strategies. Researchers obtained the power rates of the air-conditioning system in the office building under the conditions of chiller-priority and optimal contro1 throughout the cooling season. Through analysis and comparison, they find that after the implementation of optimal control, the annually saved power bills mainly result from non-design conditions, especially in the transitional seasons.


2021 ◽  
Author(s):  
Mohsen Banaei ◽  
Jalil Boudjadar ◽  
Razgar Ebrahimy ◽  
Henrik Madsen

2004 ◽  
Vol 120 ◽  
pp. 325-335
Author(s):  
D. Hömberg ◽  
S. Volkwein ◽  
W. Weiss

We discuss control strategies for the surface hardening of steel with laser or electron beam. The goal is to acchieve a prescribed hardening depth avoiding surface melting. Our mathematical model consists of a system of ODEs for the phase volume fractions coupled with the heat equation. The system is solved semi-implicitely using the finite element method. For the optimal control we discuss two approaches: model reduction using POD (Proper Orthogonal Decomposition) and a feedback control of temperature. The numerical results prove that it is not sufficient to control the surface temperature in order to obtain a uniform hardening depth. Instead the best strategy should be to compute the optimal temperature in the hot spot of the beam by solving the control problem and use this temperature as the set-point for the pyrometer control of the real process.


Sign in / Sign up

Export Citation Format

Share Document