Determination of Spot Weld Modeling Parameters from Test Data for Finite Element Crash Simulation

2004 ◽  
Author(s):  
Chelliah Madasamy ◽  
Tau Tyan ◽  
Omar Faruque ◽  
Thierry Guimberteau
Keyword(s):  
Finite Element ◽  
Test Data ◽  
Spot Weld ◽  
Crash Simulation

Computational mechanical property determination of viscoelastic/plastic materials from nanoindentation creep test data

2009 ◽  
Vol 24 (3) ◽  
pp. 1245-1257 ◽  
Author(s):  
Jianjun Wang ◽  
Timothy C. Ovaert
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Finite Element ◽  
Test Data ◽  
Plastic Material ◽  
Test Method ◽  
Element Formulation ◽  
Unknown Parameters ◽  
Plastic Materials

Nanoindentation is a widely accepted test method for materials characterization. On account of the complexity of contact deformation behavior, design of parametric constitutive models and determination of the unknown parameters is challenging. To address the need for identification of mechanical properties of viscoelastic/plastic materials from nanoindentation data, a combined numerical finite element/optimization-based indentation modeling tool was developed, fully self-contained, and capable of running on a PC as a stand-alone executable program. The approach uses inverse engineering and formulates the material characterization task as an optimization problem. The model development consists of finite element formulation, viscoelastic/plastic material models, heuristic estimation to obtain initial solution boundaries, and a gradient-based optimization algorithm for fast convergence to extract mechanical properties from the test data. A four-parameter viscoelastic/plastic model is presented, then a simplified three-parameter model with more rapid convergence. The end result is a versatile tool for indentation simulation and mechanical property analysis.

Determination of the Collapse and Propagation Pressure of Ultra-Deepwater Pipelines

2003 ◽  
Author(s):  
Rita G. Toscano ◽  
Chris M. Timms ◽  
Eduardo N. Dvorkin ◽  
Duane D. DeGeer
Keyword(s):  
Finite Element ◽  
Test Data ◽  
External Pressure ◽  
Full Scale ◽  
Test Program ◽  
Element Analysis ◽  
Line Pipe ◽  
Scale Test ◽  
Analysis Models

In the design of ultra-deepwater steel pipelines, it is important to be able to determine the pipe behaviour while subjected to external pressure and bending. In many cases, the ultra-deepwater lay process, where these high loads exist, governs the structural design of the pipeline. Much work has been performed in this area, and it is generally recognized that there is a lack of test data on full-scale samples of line pipe from which analyses can be accurately benchmarked. This paper presents the results of a nil-scale test program and finite element analyses performed on seamless steel line pipe samples intended for ultra-deepwater applications. The work involved obtaining full-scale test data and further enhancing existing finite element analysis models to accurately predict the collapse and post-collapse response of ultra-deepwater pipelines. The work and results represent a continuing effort aimed at understanding the behaviour of pipes subjected to external pressure and bending, accounting for the numerous variables influencing pipeline collapse, and predicting collapse and post-collapse behaviour with increasing confidence. The test program was performed at C-FER Technologies (C-FER), Canada, with the analyses undertaken by the Center for Industrial Research (CINI), Argentina. The results of this work have demonstrated very good agreement between the finite element predictions and the laboratory observations. This allows increased confidence in using the finite element models to predict collapse and post-collapse behaviour of pipelines subject to external pressure and bending.

Determination of Charge Coefficient of Piezoelectric Films Using a Combined Finite Element Model and Dynamic Loading Technique

2020 ◽  
Vol 835 ◽  
pp. 229-242
Author(s):  
Oboso P. Bernard ◽  
Nagih M. Shaalan ◽  
Mohab Hossam ◽  
Mohsen A. Hassan
Keyword(s):  
Finite Element ◽  
Dynamic Loading ◽  
Material Properties ◽  
Accurate Determination ◽  
Substrate Material ◽  
Experimental Results ◽  
Piezoelectric Composite ◽  
Piezoelectric Film ◽  
Piezoelectric Charge

Accurate determination of piezoelectric properties such as piezoelectric charge coefficients (d33) is an essential step in the design process of sensors and actuators using piezoelectric effect. In this study, a cost-effective and accurate method based on dynamic loading technique was proposed to determine the piezoelectric charge coefficient d33. Finite element analysis (FEA) model was developed in order to estimate d33 and validate the obtained values with experimental results. The experiment was conducted on a piezoelectric disc with a known d33 value. The effect of measuring boundary conditions, substrate material properties and specimen geometry on measured d33 value were conducted. The experimental results reveal that the determined d33 coefficient by this technique is accurate as it falls within the manufactures tolerance specifications of PZT-5A piezoelectric film d33. Further, obtained simulation results on fibre reinforced and particle reinforced piezoelectric composite were found to be similar to those that have been obtained using more advanced techniques. FE-results showed that the measured d33 coefficients depend on measuring boundary condition, piezoelectric film thickness, and substrate material properties. This method was proved to be suitable for determination of d33 coefficient effectively for piezoelectric samples of any arbitrary geometry without compromising on the accuracy of measured d33.

scholarly journals Stiffness Estimation and Equivalence of Boundary Conditions in FEM Models

2021 ◽  
Vol 11 (4) ◽  
pp. 1482
Author(s):  
Róbert Huňady ◽  
Pavol Lengvarský ◽  
Peter Pavelka ◽  
Adam Kaľavský ◽  
Jakub Mlotek
Keyword(s):  
Boundary Condition ◽  
Finite Element ◽  
Boundary Conditions ◽  
Model Updating ◽  
Element Model ◽  
Computational Time ◽  
Stiffness Coefficients ◽  
First Case ◽  
Numerical Approaches

The paper deals with methods of equivalence of boundary conditions in finite element models that are based on finite element model updating technique. The proposed methods are based on the determination of the stiffness parameters in the section plate or region, where the boundary condition or the removed part of the model is replaced by the bushing connector. Two methods for determining its elastic properties are described. In the first case, the stiffness coefficients are determined by a series of static finite element analyses that are used to obtain the response of the removed part to the six basic types of loads. The second method is a combination of experimental and numerical approaches. The natural frequencies obtained by the measurement are used in finite element (FE) optimization, in which the response of the model is tuned by changing the stiffness coefficients of the bushing. Both methods provide a good estimate of the stiffness at the region where the model is replaced by an equivalent boundary condition. This increases the accuracy of the numerical model and also saves computational time and capacity due to element reduction.

Determination of collapse moment of different angled pipe bends with initial geometric imperfection subjected to in-plane bending moments

2021 ◽  
pp. 095440622199640
Author(s):  
Manish Kumar ◽  
Pronab Roy ◽  
Kallol Khan
Keyword(s):  
Finite Element ◽  
Cross Section ◽  
Circular Cross Section ◽  
Initial Imperfection ◽  
Bend Angle ◽  
Bending Moments ◽  
Element Analysis ◽  
Geometric Imperfection ◽  
Initial Geometric Imperfection

From the recent literature, it is revealed that pipe bend geometry deviates from the circular cross-section due to pipe bending process for any bend angle, and this deviation in the cross-section is defined as the initial geometric imperfection. This paper focuses on the determination of collapse moment of different angled pipe bends incorporated with initial geometric imperfection subjected to in-plane closing and opening bending moments. The three-dimensional finite element analysis is accounted for geometric as well as material nonlinearities. Python scripting is implemented for modeling the pipe bends with initial geometry imperfection. The twice-elastic-slope method is adopted to determine the collapse moments. From the results, it is observed that initial imperfection has significant impact on the collapse moment of pipe bends. It can be concluded that the effect of initial imperfection decreases with the decrease in bend angle from 150∘ to 45∘. Based on the finite element results, a simple collapse moment equation is proposed to predict the collapse moment for more accurate cross-section of the different angled pipe bends.

Sign in / Sign up

Export Citation Format

Share Document