A Method To Evaluate Passenger Thermal Comfort In Automobile Air Conditioning Systems

2017 ◽  
Author(s):  
Abhijeet Chothave ◽  
Yashwant Mohite ◽  
Vinay Poal ◽  
Phaneendra Pamarthi
Keyword(s):  
Thermal Comfort ◽  
Air Conditioning ◽  
Air Conditioning Systems ◽  
Automobile Air Conditioning

Effect of Air Conditioning Position on Thermal Comfort in the Floor Air Conditioning System

2014 ◽  
Vol 493 ◽  
pp. 74-79
Author(s):  
Y.A. Sabtalistia ◽  
S.N.N. Ekasiwi ◽  
B. Iskandriawan
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Energy Consumption ◽  
Thermal Comfort ◽  
Energy Efficient ◽  
Air Conditioning ◽  
Air Conditioning System ◽  
Air Supply ◽  
Air Conditioning Systems ◽  
Air Diffusion

Energy consumption for air conditioning systems (air conditioning system) increased along with the increasing need for fresh air and comfortable in the room especially apartments. FAC system (Floor Air Conditioning) is growing because it is more energy efficient than CAC (Ceiling Air Conditioning) system. However, the position of the AC supply is on the lower level at the FAC system causes draft discomfort becomes greater as air supply closer to the occupants so that thermal comfort can be reduced. Heat mixture of windows, exterior walls, kitchen, and occupants in the studio apartment affect thermal comfort in the room too.This study aims to determine the position of the AC supply which has the best thermal comfort of FAC system in the studio apartment. It can be done by analyzing ADPI (Air Diffusion Performance Index), the distribution of air temperature, wind speed, RH (Relative Humidity), and DR (Draft Risk) to change the position of the AC supply supported by CFD (Computational Fluid Dynamics) simulation.This result prove that AC position 2 (on wall near the kitchen) is more comfortable than AC position 1 (on the bathroom wall) because AC position 2 away from occupied areas, thereby reducing the occurrence of draught discomfort.

scholarly journals Thermal adaptive behavior and thermal comfort for occupants in multi-person offices with air-conditioning systems

2021 ◽  
pp. 108432
Author(s):  
Peiping Zheng ◽  
Chunxiao Wang ◽  
Yanchen Liu ◽  
Borong Lin ◽  
Huijun Wu ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Adaptive Behavior ◽  
Air Conditioning ◽  
Air Conditioning Systems

scholarly journals Thermal comfort control via air conditioning system using fuzzy neural network feedback controller

2020 ◽  
Vol 19 (2) ◽  
pp. 586
Author(s):  
Somaye A. Mohamadi ◽  
Abdulraheem J. Ahmed
Keyword(s):  
Neural Network ◽  
Thermal Comfort ◽  
Environmental Conditions ◽  
Air Conditioning ◽  
Fuzzy Controller ◽  
Environmental Parameters ◽  
Thermal Conditions ◽  
Real Time Control ◽  
Air Conditioning System ◽  
Air Conditioning Systems

<span>Despite their complexity and uncertainty, air conditioning systems should provide the optimal thermal conditions in a building. These controller systems should be adaptable to changes in environmental parameters. In most air conditioning systems, today, there are On/Off controllers or PID in more advanced types, which, due to different environmental conditions, are not optimal and cannot provide the optimal environmental conditions. Controlling thermal comfort of an air conditioning system requires estimation of thermal comfort index. In this study, fuzzy controller was used to provide thermal comfort in an air conditioning system, and neural network was used to estimate thermal comfort in the feedback path of the controller. Fuzzy controller has a good response given the non-linear features of air conditioning systems. In addition, the neural network makes it possible to use thermal comfort feedback in a real-time control.</span>

scholarly journals The impact of thermal comfort in the perceived level of service and energy costs of three Brazilian airports

2013 ◽  
Vol 7 (2) ◽  
pp. 192-206 ◽  
Author(s):  
Jacqueline Elhage Ramis ◽  
Emmanuel Antonio dos Santos
Keyword(s):  
Thermal Comfort ◽  
Air Conditioning ◽  
International Standards ◽  
Combined System ◽  
Service Levels ◽  
Transportation Demand ◽  
Temperature And Humidity ◽  
Air Conditioning Systems ◽  
Air Circulation ◽  
The Impact

To evaluate airports' current thermal comfort temperature and humidity were registered in three main Brazilian international airports, other variables were local region climate characteristics and the constructive types of passenger terminal buildings. The Brazilian air transportation demand has considerably grown over the last decade, with some airports reaching their capacity. Thermal discomfort may be a key driver of passenger perceptions of airport service levels, specially under capacity overload situations. Therefore, to achieve airport thermal comfort within this new scenario, and with the imminent and future expansions of the airport system, certainly put extra work on the existing air conditioning systems, consequently increasing energy consumption and its associated costs. Collected temperature and humidity from each study case subsided the data for the psychrometric charts. The evidences showed temperatures below the international standards requirements for thermal comfort levels. These charts also indicated that adequate building types with natural air circulation, provides the best levels of thermal comfort. Results suggest the importance of considering the implementation of a combined system using artificial and natural air conditioning in the planning of future expansions.

A dynamic model for human thermal comfort for smart building applications

2019 ◽  
Vol 234 (4) ◽  
pp. 472-483
Author(s):  
Ghezlane Halhoul Merabet ◽  
Mohamed Essaaidi ◽  
Driss Benhaddou
Keyword(s):  
Thermal Comfort ◽  
Air Conditioning ◽  
Research Work ◽  
Comfort Level ◽  
Indoor Environments ◽  
Air Conditioning System ◽  
Human Thermal Comfort ◽  
Local Quality ◽  
Set Up ◽  
Air Conditioning Systems

Thermal comfort is closely related to the evaluation of heating, ventilation, and air conditioning systems. It can be seen as the result of the perception of the occupants of a given environment, and it is the product of the interaction of a number of personal and environmental factors. Otherwise, comfort issues still do not play an important role in the daily operation of commercial buildings. However, in the workplace, local quality effects, in addition to the health, the productivity that has a significant impact on the performance of the activities. In this regard, researchers have conducted, for decades, investigations related to thermal comfort and indoor environments, which includes developing models and indices through experimentations to establish standards to evaluate comfort and factors and set-up parameters for heating, ventilation, and air conditioning systems. However, to our best knowledge, most of the research work reported in the literature deals only with parameters that are not dynamically tracked. This work aims to propose a prototype for comfort measuring through a wireless sensor network and then presenting a model for thermal comfort prediction. The developed model can be used to set up a heating, ventilation, and air conditioning system to meet the expected comfort level. In particular, the obtained results show that there is a strong correlation between users’ comfort and variables such as age, gender, and body mass index as a function of height and weight.

Microbial Ecology of Extreme Environments: Automobile Air Conditioning Systems

2000 ◽  
Vol 6 (S2) ◽  
pp. 658-659
Author(s):  
R.B. Simmons ◽  
L.J. Rose ◽  
S.A. Crow ◽  
D.G. Ahearn
Keyword(s):  
Air Conditioning ◽  
Hypersensitivity Pneumonitis ◽  
Extreme Environments ◽  
Sick Building Syndrome ◽  
Extreme Environment ◽  
The United States ◽  
Temperature Changes ◽  
Sick Building ◽  
Air Conditioning Systems ◽  
Automobile Air Conditioning

Automobile air conditioning systems (ACS) might be considered an extreme environment for many microorganisms. Organisms surviving and proliferating in these systems may be presented with temperature changes ranging from subzero to over 140°F, water activity from saturation to dryness and a nutrient complexity including varying levels of hydrocarbons. Microbial communities develop in ACS and sometimes proliferate to the extent of massive colonization and production of objectionable odors.In a few instances microorganisms emanating from ACS have been associated with hypersensitivity pneumonitis and other allergic reactions. Previously we demonstrated that foam insulation and glues, in particular, on ACS insulations were colonized by fungi such as Aspergillus, Aureobasidium, Cladosporium, and Penicillium. Such fungi often are implicated in colonization of similar substrates in buildings categorized with the sick building syndrome.A total of 42 ACS from the United States, Europe and Central America have been examined by cabin air sampling culture swab, direct microscopy or a combination of these techniques.

scholarly journals Analysis of Energy Consumption in Different European Cities: The Adaptive Comfort Control Implemented Model (ACCIM) Considering Representative Concentration Pathways (RCP) Scenarios

2020 ◽  
Vol 10 (4) ◽  
pp. 1513 ◽  
Author(s):  
Daniel Sánchez-García ◽  
David Bienvenido-Huertas ◽  
Jesús A. Pulido-Arcas ◽  
Carlos Rubio-Bellido
Keyword(s):  
Climate Change ◽  
Thermal Comfort ◽  
Energy Saving ◽  
Greenhouse Gas ◽  
Air Conditioning ◽  
Rcp Scenarios ◽  
Assessment Report ◽  
European Cities ◽  
Adaptive Thermal Comfort ◽  
Air Conditioning Systems

Reports of Intergovernmental Panel on Climate Change have set various greenhouse gas emissions scenarios, through which the evolution of the temperature of the planet can be estimated throughout the 21st century. The reduction of the emissions from the different activities carried out by mankind is crucial to mitigate greenhouse gas emissions. One of the most significant activities is users’ behaviour within buildings, particularly the use of Heating, Ventilation and Air-Conditioning systems. Modifying users’ behaviour patterns to guarantee acceptable thermal conditions inside buildings could lead to considerable energy saving percentages, and adaptive thermal comfort models could be an opportunity to achieve important savings. For this reason, this study analyzes the potential to apply adaptive thermal comfort models to use artificial air-conditioning systems by modifying setpoint temperatures. The analysis was conducted in five major European cities (Barcelona, Berlin, Bern, Rome, and Vienna) and in five climate change scenarios in the year 2050. The results showed that, in general, the energy saving achieved by adaptive strategies was larger in the cities with a greater cooling demand. Also, in both Representative Concentration Pathways (RCP) of the Fifth Assessment Report (AR5) considered, the energy saving were decreased in the cities of Barcelona and Rome, with values lower than those of the Fourth Assessment Report (AR4) scenarios considered, whereas in the cities of Berlin, Bern, and Vienna, the saving in the RCP scenarios is greater than those in the other scenarios.

CFD SIMULATION OF THERMAL COMFORT USING INDIVIDUALIZED AIR CONDITIONING SYSTEMS

2015 ◽  
Author(s):  
Rafael Prata Ritzinger ◽  
Nathane Ventura de Miranda ◽  
Álvaro M. Bigonha Tibiriçá ◽  
Alexandre Navarro da Silva ◽  
Henrique Márcio Pereira Rosa ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Air Conditioning ◽  
Cfd Simulation ◽  
Air Conditioning Systems
Sign in / Sign up

Export Citation Format

Share Document