scholarly journals Effect of Riffle Height and Spacing of a Sluice Board on Placer Gold Recovery

2017 ◽  
Vol 17 (1) ◽  
pp. 64-72
Author(s):  
G. Agyei ◽  
J. J. Gordon
Keyword(s):  
Cost Effective ◽  
Processing Technique ◽  
Gold Recovery ◽  
Small Scale ◽  
Mining Site ◽  
Placer Gold ◽  
Gold Particles ◽  
Artisanal Miners ◽  
The University ◽  
Gold Bearing

Sluicing is the preferred mineral processing technique for the treatment of placer gold-bearing alluvium for small scale and artisanal miners in Ghana because sluice board is perceived to be the most cost effective device. However, there are differences in approaches from design to operation.  In this work, about 50 kg of ore was obtained from “Peace School” small scale mining site near the University of Mines and Technology, Tarkwa. It was processed to determine the effects of riffle height and spacing on gold recovery. It was confirmed that, in order to trap a greater percentage of gold particles, the height of the riffle ought to be higher than the suspension height of the gold. The suspension heights of the gold particles of the various operational regimes of the sluice board at superficial velocities of 0.5 m/s, 1.0 m/s, 1.5 m/s and 2.0 m/ were   0.9 cm, 1.2 cm, 1.5 cm and 2.9 cm respectively. Analysis of concentrates showed that, 85.4% of gold was recovered during sluicing at approximately 1.0 cm riffle height.  The lowest recovery was recorded at 0.5 cm riffle height. Gold recovery was also affected by riffles spacing.  For the indicated speeds and the riffle heights the necessary spacing should not be more than 20 cm. The peak recovery was obtained at a riffle height of 1.0 cm but dropped after 20.0 cm spacing. Keywords: Sluice Board, Riffle Height, Gold, Rifle Spacing 

Solar Photovoltaic Water Pumping to Alleviate Drought in Remote Locations

2006 ◽  
Author(s):  
Kala Meah ◽  
Steven Fletcher ◽  
Yu Wan ◽  
Sadrul Ula
Keyword(s):  
Performance Monitoring ◽  
Cost Effective ◽  
Small Scale ◽  
Solar Water ◽  
Small Water ◽  
Water Pumping ◽  
Western Us ◽  
Water Right ◽  
And Performance ◽  
The University

Many parts of the western US is rural in nature and consequently do not have electrical distribution lines in many parts of farms and ranches. Distribution line extension costs can run from $15,000 to $25,000 per mile, thereby making availability of electricity to small water pumping projects economically unattractive. Solar photo-voltaic (PV) powered water pumping is more cost effective in these small scale applications. Many western states including Wyoming are passing through fifth year of drought with the consequent shortages of water for many applications. Wyoming State Climatologist is predicting a possible 5–10 years of drought. Drought impacts the surface water right away, while it takes much longer to impact the underground aquifers. To mitigate the effect on the livestock and wildlife, Wyoming Governor Dave Freudenthal initiated a solar water pumping initiative in cooperation with the University of Wyoming, County Conservation Districts, Rural Electric Cooperatives, and ranching organizations. Solar water pumping has several advantages over traditional systems; for example, diesel or propane engines require not only expensive fuels, they also create noise and air pollution in many remote pristine areas. Solar systems are environment friendly, low maintenance and have no fuel cost. In this paper the design, installation and performance monitoring of the solar system for small scale remote water pumping will be presented.

scholarly journals Metodología geometalúrgica para mejorar el proceso de extracción de oro en pequeña escala de la mina Gualconda en Nariño – Colombia

2020 ◽  
Vol 20 (1) ◽  
Author(s):  
Gabriel Kamilo Pantoja-Barrios ◽  
Eliana Katherine Molina-Ramírez ◽  
Silvia Natalia Fuentes-Torres ◽  
Fabian Andrés Ramírez ◽  
Jaime Mojica ◽  
...  
Keyword(s):  
Particle Size ◽  
Low Cost ◽  
Size Reduction ◽  
Gold Recovery ◽  
Small Scale ◽  
Operational Parameters ◽  
Particle Size Reduction ◽  
Mineralogical Characterization ◽  
Analytical Technique ◽  
Gold Bearing

In the gold beneficiation processes, the degree of particle size reduction is strongly influenced by the size and shape of the mineral species associated with the economically important metals. The capacity, energy consumption, and costs of the gold-bearing ore processing depend mainly on the operational parameters of the equipment of comminution and gravimetric concentration; therefore, it is essential to characterize the liberation degree of the minerals of interest as function of particle size. The small-scale mining beneficiation plants usually do not consider the liberation of sulfide particles as a requirement to define the grinding size reduction ratio, this is determined empirically, evaluating in which size a higherpercentage of gold recovery is obtained. The methodology proposed in this paper constitutes a low cost analytical technique, using the free software IMAGE-J, to determine the appropriate liberation size for sulfide particles and associated gold particles,as well as the size distribution of gold ore particles. Additionally, the Molycop-Tools software was used to simulate the best grinding strategy based on the liberation results obtained.Through the methodology of automatic image analysis to determine the liberation degree of sulfides, the mineralogical characterization, and the recommendation of a metallurgical processing strategy for the gold-bearing ore based on steady-state simulations, it was possible to establish the appropriate parameters of ball mill grinding and gravimetric concentration of the Gualconda mine in the Department of Nariño, in order to improve the gold recovery and increase the plant capacity.

scholarly journals Introduction of Mercury-Free Gold Extraction to Small-Scale Miners in the Cabo Delgado Province in Mozambique

2018 ◽  
Vol 8 (19) ◽  
Author(s):  
Birgitte Stoffersen ◽  
Peter WU Appel ◽  
Leoncio D Na-Oy ◽  
Asta Selloane Sekamane ◽  
Ivan Zahinos Ruiz ◽  
...  
Keyword(s):  
Urban Areas ◽  
Extraction Method ◽  
Extraction Methods ◽  
Gold Recovery ◽  
Small Scale ◽  
Gold Extraction ◽  
Governmental Organization ◽  
Free Gold ◽  
Financial Interests ◽  
Gold Bearing

Background. The majority of small-scale gold miners worldwide, including those in Mozambique, use mercury to extract gold. Over the last fifty years, gold production from small-scale mining has been accelerating and consequently the amount of mercury released to the environment has increased dramatically, causing major global health problems. In 2018, a team from the Danish non-governmental organization Diálogos introduced the mercury-free gold extraction method in the Cabo Delgado province in Mozambique in the villages of Waqueia and Nanlia. Objectives. The objective of this project was to teach local miners this method to reduce mercury pollution. An additional objective was to compare the local gold extraction method and the mercury-free gold extraction method in terms of gold recovery. The hypothesis was that the level of gold recovery would be higher with the mercury-free method compared to the locally used amalgamation method. Materials and Methods. An experimental study comparing the two gold extraction methods was carried out where local miners processed gold-bearing ore using their standard procedures with the amalgamation method and the Diálogos team processed an equivalent amount of gold-bearing ore with the mercury-free gold extraction method. The tests were carried out once at each mining site. Results. Under even circumstances in a controlled setting, the mercury-free method yielded up to 78% more gold than the amalgamation method normally used by the miners. Conclusions. The strengths of the mercury-free gold extraction method include low costs, higher gold yield, benign environmental impact, legality and needed chemicals are more readily available compared with the amalgamation method. However, the mercury-free method may be more time consuming than the amalgamation method, especially for beginners. Borax is typically available in developed urban areas, as it is commonly used in the welding industry and by jewelers, but can be hard to find in more remote villages. Competing Interests. The authors declare no competing financial interests.

scholarly journals Mobile phone intervention for Sri Lankan mushroom producers

2014 ◽  
Vol 9 (1) ◽  
pp. 57-63 ◽  
Author(s):  
Mahinda Wijeratne ◽  
Nilantha De Silva
Keyword(s):  
Mobile Phone ◽  
Financial Management ◽  
Agricultural Sector ◽  
Interactive Voice Response ◽  
Scientific Information ◽  
Cost Effective ◽  
Climatic Conditions ◽  
Small Scale ◽  
Technology Dissemination ◽  
The University

It is well-known that traditional methods of technology dissemination are not cost-effective; and that extension agencies are limited very much by personnel resources in approaching the clientele they need to contact. Therefore, at present, many sectors of the world economies are attracted to the use of ICT for technology dissemination. However, such interventions are not common in the agricultural sector, especially in developing countries. Realizing this, the Department of Agricultural Economics and Extension at the University of Ruhuna, Sri Lanka, implemented a programme ‘Lifelong Learning for Farmers’ (L3F), employing ICT as one of its components. For this programme, the University of Ruhuna collaborated with the mobile phone company Mobitel(PLC) Ltd and developed an IVR (interactive voice response) system to approach clients. Mushroom production is essentially small-scale and remains a cottage industry. In order to raise the living standards, it is necessary to provide scientific information to scattered production units. Such efforts will turn them into commercial producers and provide an opportunity to compete in the local and foreign markets. This investigation focuses on the use ofmobile phones for technology dissemination to small-scale mushroom producers. The IVR system embedded different two-minute messages employing ODL techniques over six months. The entire series of lessons included the establishment of a mushroom shed; the preparation of the growing medium; filling bags and sterilization; inoculation and incubation of mushroom spawns; harvesting; pests and disease control; processing and preservation; seed production; and business planningand financial management. The results showed that 5,583 clients listen to the lessons; and, according to the spatial distribution, the majority of them were from wet zone districts as the climatic conditions are favourable for the enterprise. However, feedback is still limited.

scholarly journals Criteria for Determining the Genesis of Placers and Their Different Sources Based on the Morphological Features of Placer Gold

Minerals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 381
Author(s):  
Zinaida Nikiforova
Keyword(s):  
Native Gold ◽  
Morphological Characteristics ◽  
Gold Deposits ◽  
Primary Sources ◽  
Gold Content ◽  
Placer Gold ◽  
Gold Particles ◽  
Search Criterion ◽  
Different Sources ◽  
Gold Bearing

Based on the identified typomorphic features of placer gold, a set of determined morphogenetic criteria is proposed to identify the genesis of placer gold content and different sources in the platform areas, which allow more correctly selecting search methods and improving the efficiency of forecasting ore and placer gold deposits.Goldparticles larger than 0.25 mm with signs of wind-worn processing indicate the formation of autochthonous aeolian placers.Gold particles with signs of wind-worn processing with a size of 0.1–0.25 mm, forming an extensive halo of dispersion, indicate the formation of allochthonous placers in Quaternary deposits.Deflationary (autochthonous) placers of native gold can be found by the halo of its distribution of toroidal and sphericalhollow forms, which, of course, are the search morphogenetic criterion of aeolian placers.The presence of disc-shaped and lamellar gold particles with ridgelike edges in alluvial placers is typical for placers of heterogeneous origin, formed due to deflation of proluvialplacers.The discovery of pseudo-ore gold in alluvial placers indicates the arrival of gold from intermediate gold-bearing sources of different ages and not from primary sources, which is a morphogenetic criterion for determining different sources of the placer.In modern gold placers, the presence of gold of a pseudo-ore appearance can serve as a search criterion for the discovery of gold-bearing conglomerates with high gold content. The developed method for diagnosing the genotype of placer gold by its morphological characteristics (alluvial, aeolian, pseudo-ore) can be successfully used by industrial geological organizations to search and explore ore and placer gold deposits.

Urban pollution control strategy: SBR technology to treat agricultural waste from pig farm in Indonesia

2019 ◽  
Vol 2 (2) ◽  
pp. 21
Author(s):  
Lindawati Lindawati
Keyword(s):  
Cost Estimation ◽  
Batch Reactor ◽  
Agricultural Waste ◽  
Cost Effective ◽  
Land Application ◽  
Pig Manure ◽  
Small Scale ◽  
Piggery Wastewater ◽  
Pig Farm ◽  
Number Of Customers

Reduction of food rations and shortages is one of the impacts of the increasing human population. Food sector industries then try to cope with the fast growing number of customers. Agribusiness sector gains its popularity in these recent years, including pig farm. The increase trend of animal farming industry is likely to bring increasing pollution problem unless effective treatment methods are used. The main problems related to the pig farm include odor nuisance and pig manure disposal. The existing land application of piggery wastewater is the traditional way to discharge the wastewater. This may yield in land and water contamination, due to the accumulation of unused nutrients by crop plant. A case study of a large commercial pig farm from Australia is proposed to apply in smaller scale in Indonesia. Operational strategies for the small-scale SBR (Sequencing Batch Reactor) treating piggery effluent were developed based on lab-scale experiments. Due to SBR characteristics, which are money-saving and space-saving, it is very suitable to be applied in urban area. An economic evaluation was made of various process options. The cost estimation showed that SBR is a cost effective process, allowing operational batches to be adjusted to reduce unnecessary aeration cost. A reduction in the aeration cost was achieved by shortening the batch time from 24-h to 8-h. A comparison of three different SBR options showed that smaller size reactors could be more flexible and cost effective when compared with the larger ones.

scholarly journals Diversity minimization through part combination – a Portuguese railway infrastructure case study

2020 ◽  
Vol 7 (1) ◽  
pp. 86-94
Author(s):  
Diogo Rechena ◽  
Luís Sousa ◽  
Virgínia Infante ◽  
Elsa Henriques
Keyword(s):  
Economies Of Scale ◽  
Product Family ◽  
Cost Effective ◽  
Added Value ◽  
Small Scale ◽  
Railway Infrastructure ◽  
Sustainable Services ◽  
Market Needs ◽  
Design Diversity ◽  
Requirement Changes

Abstract With increasing market needs for product and service variety, companies struggle to provide diversity in cost-effective ways. Through standardization of components with a low perceived added value, companies can take advantage of economies of scale while maintaining product diversity. Railway infrastructure managers face similar challenges of providing economically sustainable services while dealing with the costs of maintaining the system diversity. Typically, unintended design diversity stems from design practices in which existing solutions are not reused for new problems and new solutions are rarely planned considering the dynamics of requirement changes. In this paper we provide a methodology to assess how to standardize different designs to minimize design diversity and to assess design divergence in a product family. The developed methodology is able to take into account any set of standardization compatibility constraints that the user can define. The methodology was applied in the context of a small-scale railway infrastructure manager using a dataset of 223 unique designs of functionally similar components from its electrification system. Depending on the activated compatibility constraints, results indicate that over 60% of components can be reduced to a set of 86 unique designs.

Gravity-flotation gold-bearing ore concentration

2021 ◽  
Vol 1 (1) ◽  
pp. 4-15
Author(s):  
P. K. Fedotov ◽  
A. E. Senchenko ◽  
K. V. Fedotov ◽  
A. E. Burdonov
Keyword(s):  
High Performance ◽  
Gold Recovery ◽  
Gold Content ◽  
Flotation Concentrate ◽  
Stage Scheme ◽  
Study Results ◽  
Ore Minerals ◽  
Concentrate Yield ◽  
Flotation Concentration ◽  
Gold Bearing

The paper focuses on the study of the gold-bearing ore dressability. According to technological research, the average gold content is 11.88 g/t. The silver content is insignificant – 2.43 g/t. Main ore minerals in the sample are pyrite and pyrrhotite. According to mineralogical and X-ray structural analysis, the average content of these minerals in the ore is about 6 % (in total). Main rock-forming minerals of the original ore are: quartz (60.1 %), quartz-chlorite-mica aggregates (3.8 %), carbonates (7.1 %). According to the study results, it was found that the gold recovery in the GRG test was 72.75 % with a total concentrate yield of 1.34 % and a content of 664.78 g/t. At the same time, the gold content in tailings was 3.29 g/t. A stage test showed that it is advisable to use a two-stage scheme for ore processing by gravity technology only. The first stage is in the grinding cycle with the 60–70 % ore size, and the second stage is with the final classifier overflow size of 90 % –0.071 mm. Centrifugal separation has high performance as a free gold recovery operation in the grinding cycle. A concentrate with a gold content of 2426 g/t was obtained with a yield of 0.31 % and a recovery of 63.74 %. The beneficiation of first stage tailings ground to 90 % –0.071 mm at the KC-CVD concentrator (modeling) made it possible to extract gold into a total gravity concentrate (KC-MD + KC-CVD) of 87.25 % with a concentrate yield of 22.63 %. The gold content in tailings was 1.97 g/t. The results of gravity and flotation concentration of the original ore indicate the feasibility of using a combined gravity-flotation technological scheme. In a closed experiment of the initial ore beneficiation according to the gravity-flotation scheme at a natural pH of the pulp (without adding acid), the following products were obtained: gravity concentrate with a gold content of 2426 g/t at a yield of 0.31 % and recovery of 64.06 %; flotation concentrate (after the II cleaning) with a gold content of 122 g/t at a yield of 2.90 % and recovery of 33.01 %; the total gold recovery in the gravity-flotation concentrate was 94.07 % with a yield of 3.21 % and an Au content of 345.87 g/t, the gold content in the flotation tailings was 0.72 g/t.

Enhancing the application potential of dissipative controlled rocking connections through detailing and design

2021 ◽  
Author(s):  
Brandon McHaffie ◽  
Peter Routledge ◽  
Alessandro Palermo
Keyword(s):  
Linear Time ◽  
Time History ◽  
Cost Effective ◽  
Real Structure ◽  
Construction Costs ◽  
Alternative Design ◽  
Design Philosophy ◽  
History Analysis ◽  
Application Potential ◽  
The University

<p>Research on low-damage systems has been significant in the past decade. These systems combine post- tensioning, which provides self-centring; and typically use replaceable devices, which give energy dissipation. WSP has used recent research, carried out at the University of Canterbury, on low-damage bridge piers and applied this into a real structure – the Wigram-Magdala Link Bridge. This is believed to be the first bridge in New Zealand and possibly worldwide to adopt such a system. Given this was the first application of the system to a real structure, there were some valuable learnings during design and construction. Firstly, the application of axial dissipaters has some limitations due to available material sizes, construction difficulty and aesthetics. Secondly, there is still some additional cost and complexity associated with using the low-damage system. Given these difficulties, this paper presents an alternative design philosophy which better captures the benefits of the low-damage system, which include cost-effective repair method, controlled damage and additional robustness and resilience. The alternative design philosophy presented is expected to result in reduced construction costs by reducing pier and foundation demands. Peak displacements and forces will be compared to the results from non-linear time history analysis to verify the performance of the low-damage connection using scaled ground motions. Furthermore, the paper will present the possible application of an alternative dissipation device, the lead extrusion damper, which can further improve the performance of low-damage connections.</p>

Sign in / Sign up

Export Citation Format

Share Document