Urban pollution control strategy: SBR technology to treat agricultural waste from pig farm in Indonesia

2019 ◽  
Vol 2 (2) ◽  
pp. 21
Author(s):  
Lindawati Lindawati

Reduction of food rations and shortages is one of the impacts of the increasing human population. Food sector industries then try to cope with the fast growing number of customers. Agribusiness sector gains its popularity in these recent years, including pig farm. The increase trend of animal farming industry is likely to bring increasing pollution problem unless effective treatment methods are used. The main problems related to the pig farm include odor nuisance and pig manure disposal. The existing land application of piggery wastewater is the traditional way to discharge the wastewater. This may yield in land and water contamination, due to the accumulation of unused nutrients by crop plant. A case study of a large commercial pig farm from Australia is proposed to apply in smaller scale in Indonesia. Operational strategies for the small-scale SBR (Sequencing Batch Reactor) treating piggery effluent were developed based on lab-scale experiments. Due to SBR characteristics, which are money-saving and space-saving, it is very suitable to be applied in urban area. An economic evaluation was made of various process options. The cost estimation showed that SBR is a cost effective process, allowing operational batches to be adjusted to reduce unnecessary aeration cost. A reduction in the aeration cost was achieved by shortening the batch time from 24-h to 8-h. A comparison of three different SBR options showed that smaller size reactors could be more flexible and cost effective when compared with the larger ones.

2000 ◽  
Vol 41 (1) ◽  
pp. 123-126 ◽  
Author(s):  
B.D. Edgerton ◽  
D. McNevin ◽  
C.H. Wong ◽  
P. Menoud ◽  
J.P. Barford ◽  
...  

Currently the accepted practice for swine wastewater disposal is lagoon stabilisation followed by land application. This disposal method can exacerbate odour emissions and contribute to soil contamination and eutrophication of waterways. Intensification of the pig industry has increased the impact of individual piggeries; this combined with tightening legislation is causing the pig industry in Australia to look at alternative treatment methods. A pilot scale sequencing batch reactor (SBR) was built to treat piggery wastewater. It achieved NH4+ and odour reductions of greater than 99% as well as 79% removal of COD and a 49% reduction of PO43−on a mass balance basis. The reactor experienced problems with foaming for the first 2 months of operation, which was controlled with vegetable oil until the foaming stopped. Struvite formation also occurred within the reactor and influent pipes but it was calculated that sufficient nutrients were removed to prevent precipitation down stream of the SBR.


2020 ◽  
Vol 21 (6) ◽  
pp. 467-479
Author(s):  
Mohammed H. Aldosari ◽  
Marcel den Hartog ◽  
Hubertina Ganizada ◽  
Martijn J.W. Evers ◽  
Enrico Mastrobattista ◽  
...  

Objective: The high cost of orphan drugs limits their access by many patients, especially in low- and middle-income countries. Many orphan drugs are off-patent without alternative generic or biosimilar versions available. Production of these drugs at the point-of-care, when feasible, could be a cost-effective alternative. Methods: The financial feasibility of this approach was estimated by setting up a small-scale production of recombinant human acid alpha-glucosidase (rhGAA). The commercial version of rhGAA is Myozyme™, and Lumizyme™ in the United States, which is used to treat Pompe disease. The rhGAA was produced in CHO-K1 mammalian cells and purified using multiple purification steps to obtain a protein profile comparable to Myozyme™. Results: The established small-scale production of rhGAA was used to obtain a realistic cost estimation for the magistral production of this biological drug. The treatment cost of rhGAA using bedside production was estimated at $3,484/gram, which is 71% lower than the commercial price of Myozyme ™. Conclusion: This study shows that bedside production might be a cost-effective approach to increase the access of patients to particular life-saving drugs.


2001 ◽  
Vol 43 (3) ◽  
pp. 123-130 ◽  
Author(s):  
W. G. Raper ◽  
J. M. Green

Food processing effluents often contain high levels of nutrients, particularly N. Conventionally, anaerobic ponds are used to purify these effluents in Australia, giving cost-effective removal of BOD but little nutrient removal. It has become apparent that disposal by irrigation as presently practised normally exceeds sustainable N application rates, thus reduction of nutrient levels before irrigation is becoming mandatory. Meatworks effluent is often discharged to country town sewers, frequently accounting for 50-75% of the nutrient load. Meatworks effluents contain 1,000-4,000 mg/L BOD, 200-400 mg/L TKN and 20-50 mg/L P. Conventional BNR technology can readily remove nutrients from such effluents, either alone or in combination with anaerobic ponds but sludge handling on such a small scale poses economic problems. Laboratory scale trials showed that both BOD removal from meatworks effluent and sludge disposal could be achieved readily in conventional anaerobic ponds. The pond effluent, together with the town sewage if required, could be treated in a sequencing batch reactor (SBR) designed for nitrification/denitrification service. Optimisation of the anaerobic pond operation was required to ensure production of the minimum BOD:N ratio needed for N removal. This paper will describe the design and commissioning of two plants; a demonstration plant installed at a typical sized meatworks in Gippsland, Victoria, and a full scale plant for treatment of combined domestic sewage and effluent from a large meatworks at Longford, Tasmania. In neither case (for different reasons) has P removal yet been required. It was demonstrated that 98% of BOD and up to 95% N removal may be cheaply and readily achieved in the SBR. Where lagoons are used, levels of N suitable for river discharge can be achieved. P can be readily removed by alum treatment when required.


Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 203
Author(s):  
Ana Sánchez-Zurano ◽  
Martina Ciardi ◽  
Tomás Lafarga ◽  
José María Fernández-Sevilla ◽  
Ruperto Bermejo ◽  
...  

Animal production inevitably causes the emission of greenhouse gases and the generation of large amounts of slurry, both representing a serious environmental problem. Photosynthetic microorganisms such as microalgae and cyanobacteria have been proposed as alternative strategies to bioremediate agricultural waste while consuming carbon dioxide and producing valuable biomass. The current study assessed the potential of the microalga Scenedesmus sp. to remove nutrients from piggery wastewater (PWW) and the influence of the microalga on the microbial consortia. Maximum N-NH4+ consumption was 55.3 ± 3.7 mg·L−1·day−1 while P-PO43− removal rates were in the range 0.1–1.9 mg·L−1·day−1. N-NH4+ removal was partially caused by the action of nitrifying bacteria, which led to the production of N-NO3−. N-NO3− production values where lower when microalgae were more active. This work demonstrated that the photosynthetic activity of microalgae allows us to increase nutrient removal rates from PWW and to reduce the coliform bacterial load of the effluent, minimising both their environmental impact and health risks. Microalgae assimilated part of the N-NH4+ present in the media to produce biomass and did not to convert it into N-NO3− as in traditional processes.


Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2189
Author(s):  
Cesare Caputo ◽  
Ondřej Mašek

Energy access and waste management are two of the most pressing developmental and environmental issues on a global level to help mitigate the accelerating impacts of climate change. They are particularly relevant in Sub–Saharan Africa where electrification rates are significantly below global averages and rural areas are lacking a formal waste management sector. This paper explores the potential of integrating solar energy into a biomass pyrolysis unit as a potentially synergetic solution to both issues. The full design of a slow pyrolysis batch reactor targeted at biochar production, following a strict cost minimization approach, is presented in light of the relevant considerations. SPEAR is powered using a Cassegrain optics parabolic dish system, integrated into the reactor via a manual tracking system and optically optimized with a Monte-Carlo ray tracing methodology. The design approach employed has led to the development an overall cost efficient system, with the potential to achieve optical efficiencies up 72% under a 1.5° tracking error. The outputs of the system are biochar and electricity, to be used for soil amendment and energy access purposes, respectively. There is potential to pyrolyze a number of agricultural waste streams for the region, producing at least 5 kg of biochar per unit per day depending on the feedstock employed. Financial assessment of SPEAR yields a positive Net Present Value (NPV) in nearly all scenarios evaluated and a reasonable competitiveness with small scale solar for electrification objectives. Finally, SPEAR presents important positive social and environmental externalities and should be feasibly implementable in the region in the near term.


Microbiome ◽  
2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Ishi Keenum ◽  
Robert K. Williams ◽  
Partha Ray ◽  
Emily D. Garner ◽  
Katharine F. Knowlton ◽  
...  

Abstract Background Research is needed to delineate the relative and combined effects of different antibiotic administration and manure management practices in either amplifying or attenuating the potential for antibiotic resistance to spread. Here, we carried out a comprehensive parallel examination of the effects of small-scale (> 55 °C × 3 days) static and turned composting of manures from dairy and beef cattle collected during standard antibiotic administration (cephapirin/pirlimycin or sulfamethazine/chlortetracycline/tylosin, respectively), versus from untreated cattle, on “resistomes” (total antibiotic resistance genes (ARGs) determined via shotgun metagenomic sequencing), bacterial microbiota, and indicator ARGs enumerated via quantitative polymerase chain reaction. To gain insight into the role of the thermophilic phase, compost was also externally heated to > 55 °C × 15 days. Results Progression of composting with time and succession of the corresponding bacterial microbiota was the overarching driver of the resistome composition (ANOSIM; R = 0.424, p = 0.001, respectively) in all composts at the small-scale. Reduction in relative abundance (16S rRNA gene normalized) of total ARGs in finished compost (day 42) versus day 0 was noted across all conditions (ANOSIM; R = 0.728, p = 0.001), except when externally heated. Sul1, intI1, beta-lactam ARGs, and plasmid-associated genes increased in all finished composts as compared with the initial condition. External heating more effectively reduced certain clinically relevant ARGs (blaOXA, blaCARB), fecal coliforms, and resistome risk scores, which take into account putative pathogen annotations. When manure was collected during antibiotic administration, taxonomic composition of the compost was distinct according to nonmetric multidimensional analysis and tet(W) decayed faster in the dairy manure with antibiotic condition and slower in the beef manure with antibiotic condition. Conclusions This comprehensive, integrated study revealed that composting had a dominant effect on corresponding resistome composition, while little difference was noted as a function of collecting manure during antibiotic administration. Reduction in total ARGs, tet(W), and resistome risk suggested that composting reduced some potential for antibiotic resistance to spread, but the increase and persistence of other indicators of antibiotic resistance were concerning. Results indicate that composting guidelines intended for pathogen reduction do not necessarily provide a comprehensive barrier to ARGs or their mobility prior to land application and additional mitigation measures should be considered.


2020 ◽  
Vol 7 (1) ◽  
pp. 86-94
Author(s):  
Diogo Rechena ◽  
Luís Sousa ◽  
Virgínia Infante ◽  
Elsa Henriques

Abstract With increasing market needs for product and service variety, companies struggle to provide diversity in cost-effective ways. Through standardization of components with a low perceived added value, companies can take advantage of economies of scale while maintaining product diversity. Railway infrastructure managers face similar challenges of providing economically sustainable services while dealing with the costs of maintaining the system diversity. Typically, unintended design diversity stems from design practices in which existing solutions are not reused for new problems and new solutions are rarely planned considering the dynamics of requirement changes. In this paper we provide a methodology to assess how to standardize different designs to minimize design diversity and to assess design divergence in a product family. The developed methodology is able to take into account any set of standardization compatibility constraints that the user can define. The methodology was applied in the context of a small-scale railway infrastructure manager using a dataset of 223 unique designs of functionally similar components from its electrification system. Depending on the activated compatibility constraints, results indicate that over 60% of components can be reduced to a set of 86 unique designs.


1993 ◽  
Vol 28 (10) ◽  
pp. 267-274 ◽  
Author(s):  
M. Imura ◽  
E. Suzuki ◽  
T. Kitao ◽  
S. Iwai

In order to apply a sequencing batch reactor activated sludge process to small scale treatment facilities, various experiments were conducted by manufacturing an experimental apparatus made of a factory-produced FRP cylinder transverse tank (Ø 2,500mm). Results of the verification test conducted for one year by leading the wastewater discharged from apartment houses into the experimental apparatus were as follows. Excellent performance was achieved without any addition of carbon source, irrespective of the organic compound concentration and the temperature of raw wastewater. Organic substances, nitrogen and phosphorus were removed simultaneously. Due to the automated operation format, stable performance was obtained with only periodic maintenance. Though water depth of the experimental plant was shallow, effective sedimentation of activated sludge was continued during the experimental period. Regarding the aerobic and anaerobic process, nitrification and denitrification occurred smoothly.


Author(s):  
X. C. Nguyen ◽  
Komla Miheaye ◽  
Mun-gyu Kim ◽  
Howard Newman ◽  
Dong-hoon Yoo ◽  
...  

This study describes a FLNG specifically designed to monetize Associated Gas (AG) of producing oil fields located within convenient distance of an existing LNG Plant or Port with LNG storage facility. Limited production capacity combined with short range small capacity shuttles and limited LNG storage capacity, provide a cost effective means for LNG production. This FLNG is designed to service an existing industry and does not require development of stranded gas discoveries.


Sign in / Sign up

Export Citation Format

Share Document