scholarly journals Physicochemical Characteristics, Identification of Fungi and Optimization of Different Parameters for Degradation of Dye from Tannery Effluent

2020 ◽  
Vol 24 (7) ◽  
pp. 1203-1208
Author(s):  
Ashley B. Ben ◽  
E. Amutha ◽  
E Pushpalaksmi ◽  
Samraj J. Jenson ◽  
G. Annadurai
Keyword(s):  
Aspergillus Niger ◽  
Physicochemical Parameters ◽  
Copper Chloride ◽  
Dye Decolorization ◽  
Tannery Effluent ◽  
Curvularia Lunata ◽  
Isolation And Identification ◽  
Tannery Effluents ◽  
Fungal Isolation ◽  
Identification Of Fungi

This study was carried out to find out the qualities of tannery effluents with the assessment of physicochemical parameters of effluent, isolation, and identification of fungi and their optimization of different parameters on dye decolorization. In the present study, various physicochemical parameters such as Color, Odor, pH, EC, TSS, TDS, BOD, COD, Chromium, Copper, Chloride, and Sodium of untreated tannery effluent wasstudied. The results of the parameters showed that the effluent was blackish with a disagreeable odor, alkaline in pH with a high organic and inorganic loads such as EC, TDS, BOD, COD, TSS, Chromium, Copper, Chloride and Sodium. The physicochemical parameters were determined as per the standards prescribed by CPCB. Four fungal species were isolated and identified by LPCB staining namely Aspergillus niger, Aspergillus flavus, Penicillium citrinum, and Curvularia lunata. To test the activity of these fungi on different dyes, experiments were carried out for the optimization of different parameters. The maximum decolorization of dye was achieved by Aspergillus niger. From this study, it was found that the maximum biotransformation of dye effluent can help to solve the pollution problem. Keywords: physicochemical parameters, fungal isolation, and identification, Aspergillus niger, 

scholarly journals Isolation And Identification of Fungi Associated with Different Species of Stored Graines

2020 ◽  
Vol 23 (2) ◽  
pp. 246-258
Author(s):  
Khadeeja A. Saido ◽  
Halben I. Mohammed ◽  
Raed A. Haleem
Keyword(s):  
Agar Plate ◽  
Lima Bean ◽  
Single Species ◽  
Fungal Species ◽  
Isolation And Identification ◽  
Plate Method ◽  
Fungal Isolation ◽  
Identification Of Fungi ◽  
Rhizopus Sp ◽  
Penicillium Spp

This study was conducted on different species of stored grains obtained from Duhok Province, Kurdistan Region, of Iraq to investigate the occurrence of seed borne fungi. Nine types of grains were collected and two methods were selected (agar plate method and blotter method) for fungal isolation. A total of 19 species assigned to 13 genera were identified. The high frequent genera were Aspergillus (4 species), Penicillium, Alternaria and Fusarium (2 species), while other genera include Rhizopus, Cladosporium, Stemphylium, Ulocladium, Humicola, Bipolaris, Curvularia Phoma and Rhizoctonia were represented only in a single species. The results showed a variation in the fungal species and contamination percentage according to the detection and incubation methods. The lowest occurrence percentage was detected in lentils seeds with only one genus represented by Penicillium spp., while the highest occurrence percentage was detected with Chickpea seeds represent by six genera. The most common fungal genera displayed by agar plate method in wheat and chickpea were Rhizoctonia sp. (34.1%) and Penicillium sp. (42.5%) respectively. The highest fungal detection by blotter method was recorded with barley seeds while the lowest was chickpea seeds. The most common fungal genera recorded by blotter method under room temperature after 7 days and 14 days was Penicillium spp, with a percent 100% from chickpea seeds followed by Aspergillus spp with percent of (66.7%, 47.6%) from barley and raisin seeds respectively. While the highest frequent fungus in seeds incubated at 25°C after 7 and 14 days was Aspergillus parasiticus (88.9%) from mash seeds and Rhizopus sp. (80.1%) from lima bean respectively. Blotter method considered an efficient and economically reliable method.

scholarly journals Selection, isolation, and identification of fungi for bioherbicide production

2017 ◽  
Vol 48 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Angélica Rossana Castro de Souza ◽  
Daiana Bortoluzzi Baldoni ◽  
Jessica Lima ◽  
Vitória Porto ◽  
Camila Marcuz ◽  
...  
Keyword(s):  
Isolation And Identification ◽  
Identification Of Fungi

scholarly journals Isolation and Identification of Heavy Metal Tolerant Bacteria from Tannery Effluents

2016 ◽  
Vol 29 (1) ◽  
pp. 23-26
Author(s):  
M Iqbal Hossain ◽  
M Nural Anwar
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Bacillus Coagulans ◽  
Bacillus Firmus ◽  
Chemical Parameters ◽  
High Concentration ◽  
Isolation And Identification ◽  
Tannery Effluents ◽  
Physical And Chemical ◽  
Metal Tolerant Bacteria

The aim and objective of the study was to isolate and characterize heavy metal tolerant microorganisms from tannery effluents. Six effluent samples were collected aseptically and their physical and chemical parameters were determined. A total of 40 bacterial colonies were isolated from these effluent samples. Among them, six bacterial isolates were characterized provisionally as Alcaligenes aquamarinus, Bacillus coagulans, Bacillus firmus, Enterobacter cloacae, Pseudomonas alcaligens and Pseudomonas mendocina based on morphological, cultural and biochemical characteristics. The survibality and tolerance to heavy metals (Cr and Cu) of these isolates were examined. All the isolates were found to grow at high concentration of CuSO4 (95ppm/ml) and varying degrees of chromium (K2Cr2O7). The highest tolerance was shown by Alcaligenes aquamarinus. These heavy metal tolerant organisms could be potential agents for bioremediation of heavy metals polluted environment.Bangladesh J Microbiol, Volume 29, Number 1, June 2012, pp 23-26

scholarly journals Isolation and identification of fungi associated with some Libyan foods

2015 ◽  
Vol 9 (7) ◽  
pp. 406-410 ◽  
Author(s):  
Alkenz S ◽  
A Sassi A ◽  
S Abugnah Y ◽  
B Alryani M
Keyword(s):  
Isolation And Identification ◽  
Identification Of Fungi

scholarly journals Bioreduction of Cr(VI) by Viable Cells and Cell-Free Extract of a Moderate Halophile, Halomonas Smyrnensis KS802 and Evaluation of Their in Vitro Efficacy in Tannery Effluent

2020 ◽  
Author(s):  
Jhuma Biswas ◽  
AK Paul
Keyword(s):  
Reductase Activity ◽  
Basal Medium ◽  
Tannery Effluent ◽  
Chromate Reduction ◽  
Cell Free Extract ◽  
Tannery Effluents ◽  
Moderate Halophile ◽  
Viable Cells ◽  
Reducing Ability ◽  
Halomonas Smyrnensis

Abstract The present study was aimed to characterize the chromate reducing ability of cells and cell-free extract (CFE) of Halomonas smyrnensis KS802 (GenBank Accession No. KU982965) and evaluate their effectiveness in tannery effluents. Viable cells of the strain reduced 200 µM Cr(VI) in basal medium for halophiles (MH) in 10 h and was inversely proportional to Cr(VI) concentrations. The rapid reduction by cells (10⁹ cells/mL) was achieved with 7.5% NaCl, at pH 7 and 37°C which increased with increasing cell density (10¹° cells/mL). While acetate, Cu³⁺, Fe³⁺, SO₄²⁻, and CO₃²⁻ were stimulating the reduction, the inhibitors retarded the process significantly. The NADH-dependent chromate reduction of the CFE was found to be constitutive with Km and Vmax values of 56.58 µM and 3.37 µM/min/mg protein respectively. The optimal reductase activity of the CFE was evident at 200 µM Cr(VI), 10% NaCl, pH 8.0 and at 45°C. A higher concentration of CFE and electron donors increased the enzyme activity but was impacted negatively by toxic metals and anions. Both the cells and CFE were capable of reducing Cr(VI) remarkably from tannery effluent. FTIR and XRD spectra of chromate reducing cells confirmed possible complexation of reduced Cr-species with functional groups on cell surface.

scholarly journals Inventarisasi Jamur Patogen Tular-Benih pada Lima Varietas Padi

2020 ◽  
Vol 3 (1) ◽  
pp. 1-15
Author(s):  
Sifa Sobianti ◽  
Loekas Soesanto ◽  
Suciati Hadi
Keyword(s):  
Aspergillus Niger ◽  
Rhizoctonia Solani ◽  
Aspergillus Flavus ◽  
Rhizopus Oryzae ◽  
Curvularia Lunata ◽  
Fusarium Semitectum

Penelitian ini bertujuan untuk mengetahui (1) beragam spesies jamur patogen tular-benih pada lima varietas padi, dan (2) persentase daya kecambah lima varietas padi. Penelitian dilaksanakan di Laboratorium Karantina Pertanian Kelas I Semarang, dari bulan Maret sampai dengan Mei 2019. Penelitian ini menggunakan Rancangan Acak Lengkap dengan 5 perlakuan dan 5 ulangan, perlakuan terdiri atas Varietas Inpago Unsoed 1, Inpago Unsoed Parimas, IR64, Ciherang, dan Situ Bagendit. Isolasi dan identifikasi jamur patogen tular-benih dilakukan pada blotter test dan medium PDA, dengan pengamatan di bawah mikroskop stereo dan kompon, kemudian dibandingkan dengan pustaka. Variabel yang diamati yaitu morfologi koloni patogen, morfologi patogen, dan daya kecambah. Hasil penelitian menunjukkan bahwa (1) pada semua varietas benih padi terdapat jamur patogen tular-benih, tetapi tidak semua jamur tersebut dijumpai pada setiap varietas. Jenis jamur patogen tular-benih yang dijumpai, yaitu Alternaria padwickii Ganguly, Aspergillus flavus Link, Aspergillus niger van Tieghem, Curvularia lunata (Wakker) Boedjin, Curvularia pallescens Boedjin, Drechslera oryzae Breda de Haan, Fusarium semitectum Berk. & Rav. [W&R, G,B,J], Rhizoctonia solani J. G. Kuhn, Rhizopus oryzae Went & Prins. Geerl., dan Tilletia barclayana Bref., dan (2) uji daya kecambah menunjukkan bahwa masing-masing varietas benih padi memilki persentase daya kecambah benih yang berbeda. Daya kecambah benih berturut-turut pada varietas IR64, Ciherang, Inpago Unsoed 1, Inpago Unsoed Parimas, dan Situ Bagendit sebesar 85,75, 81,75, 80,25, 76,5, dan 70%.

Sign in / Sign up

Export Citation Format

Share Document