Intercity passenger rail impact on housing

Keyword(s):  
2021 ◽  
Vol 720 (1) ◽  
pp. 012047
Author(s):  
S A Merkushev ◽  
S R Khusnutdinova ◽  
R R Khusnutdinov

Author(s):  
Karina Jacobsen

Abstract The Federal Railroad Administration’s Office of Research, Development and Technology has been conducting research into passenger fuel tank crashworthiness. The occurrence of a fuel tank puncture during passenger rail collisions and derailments increases the potential of serious injury and fatality for crew and passengers due to the possibility of fire. The purpose of the FRA research is to help support regulatory and standard development with technical data. In the last decade, the research has focused on understanding how fuel tanks are punctured during an impact and how various tank designs respond to common types of loading in collisions, derailments and general operation. Throughout the research, surveys have been conducted to determine the most likely scenarios that are causing fuel tank punctures. A previous FRA survey found that fuel tank punctures occur under two types of loading conditions: a blunt impact or a raking impact. A limited number of accident/incidents were evaluated in this survey. These incidents showed that fuel tanks are punctured on any side that is not protected or shielded. The purpose of this paper is to report on a recently conducted fuel tank puncture survey updated to include the last decade. This paper identifies and describes accidents and incidents that led to breached fuel tanks in freight and passenger trains traveling on the general railroad system in the U.S. between 2008 and 2020. The results include data from the FRA’s Railroad Accident/Incident Reporting System (RAIRS), queried from 1995 to 2020. This data include the number of recorded accidents/incidents and other trends like fuel spillage, operating authority and cause of accident/incident. RAIRS data showed accidents/incidents with fuel tank puncture ranging from 10 to 55 accidents/incidents per year. Additionally, more detailed results are shared from field investigations recently conducted by the FRA or Volpe Center. These more detailed investigations provide additional insight into the types of loading that may lead to a fuel tank puncture. This survey supplements the RAIRS data with more detailed information from field investigations. The paper finally discusses the conditions that lead to fire and the associated hazards.


Author(s):  
John Tunna ◽  
Jingjun Zhang ◽  
Adrian Gorski

The Passenger Rail Investment and Improvement Act (PRIIA) Section 305 Next Generation Equipment Committee’s specification for diesel-electric locomotives has several challenging requirements. Among these is limiting P2 Force to 82,000 pound force (lbf) at 125 miles per hour (mph). To achieve this, the locomotive designer would have to balance unsprung mass and axle load. A design envelope exists within which that balance can be achieved. Advanced designs of traction and braking systems are required, and attention has to be paid to minimizing the overall mass of the locomotive.


2018 ◽  
Vol 32 (11) ◽  
pp. 5179-5188 ◽  
Author(s):  
Stasys Steišūnas ◽  
Gintautas Bureika ◽  
Gediminas Vaičiūnas ◽  
Marijonas Bogdevičius ◽  
Olegas Lunys

2019 ◽  
Vol 36 (1) ◽  
pp. 435-448 ◽  
Author(s):  
Xiaoqiang Zhang ◽  
Lin Li ◽  
Scott Le Vine ◽  
Xiaobo Liu

Sign in / Sign up

Export Citation Format

Share Document