scholarly journals Seismogenesis in Central Apennines, Italy: an integrated analysis of minor earthquake sequences and structural data in the Amatrice-Campotosto area

2009 ◽  
Vol 47 (6) ◽  
Author(s):  
P. Boncio ◽  
G. Lavecchia ◽  
G. Milana ◽  
B. Rozzi
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Normal Fault ◽  
Structural Data ◽  
Integrated Analysis ◽  
Fault Plane Solutions ◽  
Small Magnitude ◽  
Fault Surface ◽  
Displacement Profile ◽  
Earthquake Sequences

We present a seismotectonic study of the Amatrice-Campotosto area (Central Italy) based on an integrated analysis of minor earthquake sequences, geological data and crustal rheology. The area has been affected by three small-magnitude seismic sequences: August 1992 (M=3.9), June 1994 (M=3.7) and October 1996 (M=4.0). The hypocentral locations and fault plane solutions of the 1996 sequence are based on original data; the seismological features of the 1992 and 1994 sequences are summarised from literature. The active WSWdipping Mt. Gorzano normal fault is interpreted as the common seismogenic structure for the three analysed sequences. The mean state of stress obtained by inversion of focal mechanisms (WSW-ENE-trending deviatoric tension) is comparable to that responsible for finite Quaternary displacement, showing that the stress field has not changed since the onset of extensional tectonics. Available morphotectonic data integrated with original structural data show that the Mt. Gorzano Fault extends for ~28 km along strike. The along-strike displacement profile is typical of an isolated fault, without significant internal segmentation. The strong evidence of late Quaternary activity in the southern part of the fault (with lower displacement gradient) is explained in this work in terms of displacement profile readjustment within a fault unable to grow further laterally. The depth distribution of seismicity and the crustal rheology yield a thickness of ~15 km for the brittle layer. An area of ~530 km2 is estimated for the entire Mt. Gorzano Fault surface. In historical times, the northern portion of the fault was probably activated during the 1639 Amatrice earthquake (I = X, M~ 6.3), but this is not the largest event we expect on the fault. We propose that a large earthquake might activate the entire 28 km long Mt. Gorzano Fault, with an expected Mmax up to 6.7.

scholarly journals Multiple Lines of Evidence for a Potentially Seismogenic Fault Along the Central-Apennine (Italy) Active Extensional Belt–An Unexpected Outcome of the MW6.5 Norcia 2016 Earthquake

2021 ◽  
Vol 9 ◽  
Author(s):  
Federica Ferrarini ◽  
Rita de Nardis ◽  
Francesco Brozzetti ◽  
Daniele Cirillo ◽  
J Ramón Arrowsmith ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Tectonic Setting ◽  
Central Italy ◽  
Stress Transfer ◽  
Normal Fault ◽  
Normal Faults ◽  
Coulomb Stress ◽  
Seismic Sequence ◽  
Seismogenic Fault ◽  
Seismogenic Source

The Apenninic chain, in central Italy, has been recently struck by the Norcia 2016 seismic sequence. Three mainshocks, in 2016, occurred on August 24 (MW6.0), October 26 (MW 5.9) and October 30 (MW6.5) along well-known late Quaternary active WSW-dipping normal faults. Coseismic fractures and hypocentral seismicity distribution are mostly associated with failure along the Mt Vettore-Mt Bove (VBF) fault. Nevertheless, following the October 26 shock, the aftershock spatial distribution suggests the activation of a source not previously mapped beyond the northern tip of the VBF system. In this area, a remarkable seismicity rate was observed also during 2017 and 2018, the most energetic event being the April 10, 2018 (MW4.6) normal fault earthquake. In this paper, we advance the hypothesis that the Norcia seismic sequence activated a previously unknown seismogenic source. We constrain its geometry and seismogenic behavior by exploiting: 1) morphometric analysis of high-resolution topographic data; 2) field geologic- and morphotectonic evidence within the context of long-term deformation constraints; 3) 3D seismological validation of fault activity, and 4) Coulomb stress transfer modeling. Our results support the existence of distributed and subtle deformation along normal fault segments related to an immature structure, the Pievebovigliana fault (PBF). The fault strikes in NNW-SSE direction, dips to SW and is in right-lateral en echelon setting with the VBF system. Its activation has been highlighted by most of the seismicity observed in the sector. The geometry and location are compatible with volumes of enhanced stress identified by Coulomb stress-transfer computations. Its reconstructed length (at least 13 km) is compatible with the occurrence of MW≥6.0 earthquakes in a sector heretofore characterized by low seismic activity. The evidence for PBF is a new observation associated with the Norcia 2016 seismic sequence and is consistent with the overall tectonic setting of the area. Its existence implies a northward extent of the intra-Apennine extensional domain and should be considered to address seismic hazard assessments in central Italy.

scholarly journals The active Nea Anchialos Fault System (Central Greece): comparison of geological, morphotectonic, archaeological and seismological data

1996 ◽  
Vol 39 (3) ◽  
Author(s):  
R. Caputo
Keyword(s):  
Stress Field ◽  
Late Quaternary ◽  
Slip Rate ◽  
Structural Data ◽  
Fault Slip ◽  
Fault System ◽  
Middle Pleistocene ◽  
Integrated Analysis ◽  
Archaeological Data ◽  
Seismological Data

The Nea Anchialos Fault System has been studied integrating geological, morphological, structural, archaeological and seismic data. This fault system forms the northern boundary of the Almyros Basin which is one of the Neogene-Quaternary tectonic basins of Thessaly. Specific structural and geomorphological mapping were carried out and fault-slip data analysis allowed the Late Quaternary palaeo-stress field to be estimated. The resulting N-S trending purely extensional regime is consistent with the direction of the T-axes computed from the focal mechanisms of the summer 1980, Volos seismic sequence and the April 30, 1985 Almyros earthquake. A minor set of structural data indicates a WNW-ESE extension which has been interpreted as due to a local and second order stress field occurring during the N-S regional extension. Furthermore, new archaeological data, discovered by the author, have improved morphology and tectonics of the area also allowing a tentative estimate of the historic (III-IV century AD. to Present) fault slip rate. Several topographic profiles across the major E- W topographic escarpment as well as along the streams, have emphasised scarps and knick-points, further supporting the occurrence of very recent morphogenic activity. In the last section, the structural, morphological and archaeological data are compared with the already existing seismological data and their integrated analysis indicates that the Nea Anchialos Fault System has been active since Lower(?)-Middle Pleistocene.

scholarly journals Late Quaternary faulting in southern Matese (central Italy): implications for earthquake potential in the southern Apennines

2021 ◽  
Author(s):  
Paolo Boncio ◽  
Eugenio Auciello ◽  
Vincenzo Amato ◽  
Pietro Aucelli ◽  
Paola Petrosino ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Slip Rate ◽  
Normal Fault ◽  
Historical Earthquakes ◽  
Fault System ◽  
Southern Apennines ◽  
Mountain Front ◽  
Point Data ◽  
Earthquake Potential

Abstract. We studied in detail the Gioia Sannitica active normal fault (GF) along the Southern Matese Fault system in the southern Apennines of Italy. The current activity of the fault system and its potential to produce strong earthquakes have been underestimated so far, and are now defined. Precise mapping of the GF fault trace on a 1 : 20,000 geological map and several point data on geometry, kinematics and throw rate are made available in electronic format. The GF, and in general the entire fault system along the southern Matese mountain front, is made of slowly-slipping faults, with a long active history revealed by the large geologic offsets, mature geomorphology, and complex fault pattern and kinematics. Present activity has resulted in Late Quaternary fault scarps resurrecting the foot of the mountain front, and Holocene surface faulting. The slip rate varies along-strike, with maximum Late Pleistocene – Holocene throw rate of ~0.5 mm/yr. Activation of the 11.5 km-long GF can produce up to M 6.1 earthquakes. If activated together with the 18 km-long Ailano-Piedimonte Matese fault (APMF), the seismogenic potential would be M 6.8. The slip history of the two faults is compatible with a contemporaneous rupture. The observed Holocene displacements on the GF and APMF are compatible with activations during some poorly known historical earthquakes, such as the 1293 (M 5.8), 1349 (M 6.8; southern prolongation of the rupture on the Aquae Iuliae fault?) and CE 346 earthquakes. A fault rupture during the 847 poorly-constrained historical earthquake is also compatible with the dated displacements.

scholarly journals Instrumental seismicity of the Amatrice earthquake epicentral area: a review 

2016 ◽  
Vol 59 ◽  
Author(s):  
Maria Grazia Ciaccio
Keyword(s):  
Moment Tensor ◽  
Central Italy ◽  
Central Area ◽  
Seismic Sequence ◽  
Centroid Moment Tensor ◽  
Fault Plane Solutions ◽  
Small Magnitude ◽  
Epicentral Area ◽  
Seismic Sequences ◽  
Seismogenic Structures

<p><em>This study presents a review of the instrumental seismicity of the Norcia-Amatrice area (central Italy) where a still on-going seismic sequence started on August 24th 2016 with a Mw6.0 earthquake.</em></p><p><em>The review is based on the analysis of the </em><em>seismic catalogs 1981-2016, the CMT (Centroid Moment Tensor) solutions and the TDMT (Time Domain Moment Tensor) solutions, dividing the area into three regions based on the main seismic sequences preceding the Amatrice 2016 mainshock.</em><em></em></p><p><em>The seismicity of this region is characterized by different types of activity: single events, minor sequences and swarms with hypocenters within the upper 15 km of the crust. </em><em>Small-magnitude seismic sequences on March 2007 with maximum Mw3.9, and one earthquake on March 2012, Mw37, not followed by significant seismicity, affected the area east of the Norcia, close to the Mw 5.4 aftershock of the Amatrice 2016 sequence. In the central area, near Accumoli, and in the southern sector close to Amatrice, minor seismic sequences occurred on February 2014 Ml3.5 and on November 2013 Mw3.7 respectively.</em><em></em></p><p><em>We integrated hypocentral locations and fault plane solutions to give a first look at the main features of the instrumental seismicity compared to the present seismic sequence in order to relate the seismicity patterns to seismogenic structures of this area of the central Italy.</em><em></em></p>

Quantification of excess 231Pa in late Quaternary igneous baddeleyite

2020 ◽  
Vol 105 (12) ◽  
pp. 1830-1840 ◽  
Author(s):  
Yi Sun ◽  
Axel K. Schmitt ◽  
Lucia Pappalardo ◽  
Massimo Russo
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Direct Analysis ◽  
Weight Percent ◽  
Volcanic Field ◽  
Distribution Coefficients ◽  
Secular Equilibrium ◽  
Melt Distribution ◽  
D Values ◽  
Significant Figures

Abstract Initial excess protactinium (231Pa) is a frequently suspected source of discordance in baddeleyite (ZrO2) geochronology, which limits accurate U/Pb dating, but such excesses have never been directly demonstrated. In this study, Pa incorporation in late Holocene baddeleyite from Somma-Vesuvius (Campanian Volcanic Province, central Italy) and Laacher See (East Eifel Volcanic Field, western Germany) was quantified by U-Th-Pa measurements using a large-geometry ion microprobe. Baddeleyite crystals isolated from subvolcanic syenites have average U concentrations of ~200 ppm and are largely stoichiometric with minor abundances of Nb, Hf, Ti, and Fe up to a few weight percent. Measured (231Pa)/(235U) activity ratios are significantly above the secular equilibrium value of unity and range from 3.4(8) to 14.9(2.6) in Vesuvius baddeleyite and from 3.6(9) to 8.9(1.4) in Laacher See baddeleyite (values within parentheses represent uncertainties in the last significant figures reported as 1σ throughout the text). Crystallization ages of 5.12(56) ka (Vesuvius; MSWD = 0.96, n = 12) and 15.6(2.0) ka (Laacher See; MSWD = 0.91, n = 10) were obtained from (230Th)/(238U) disequilibria for the same crystals, which are close to the respective eruption ages. Applying a corresponding age correction indicates average initial (231Pa)/(235U)0 of 8.8(1.0) (Vesuvius) and 7.9(5) (Laacher See). For reasonable melt activities, model baddeleyite-melt distribution coefficients of DPa/DU = 5.8(2) and 4.1(2) are obtained for Vesuvius and Laacher See, respectively. Speciation-dependent (Pa4+ vs. Pa5+) partitioning coefficients (D values) from crystal lattice strain models for tetra- and pentavalent proxy ions significantly exceed DPa/DU inferred from direct analysis of 231Pa for Pa5+. This is consistent with predominantly reduced Pa4+ in the melt, for which D values similar to U4+ are expected. Contrary to common assumptions, baddeleyite-crystallizing melts from Vesuvius and Laacher See appear to be dominated by Pa4+ rather than Pa5+. An initial disequilibrium correction for baddeleyite geochronology using DPa/DU = 5 ± 1 is recommended for oxidized phonolitic melt compositions.

Combined Application of Deep Boundary Detection Tool, Multilayer Data Inversion and 3D Visualization of Seismic Data in Real Time for Geosteering on the Oilfield in the Russian Federation

2021 ◽  
Author(s):  
Chingis Oshakbayev ◽  
Roman Romanov ◽  
Valentin Vlassenko ◽  
Simon Austin ◽  
Sergey Kovalev ◽  
...  
Keyword(s):  
Real Time ◽  
Oil Recovery ◽  
Seismic Data ◽  
3D Visualization ◽  
Structural Data ◽  
Boundary Detection ◽  
Integrated Analysis ◽  
Horizontal Section ◽  
Recovery Method ◽  
Detection Tool

Abstract Currently drilling of horizontal wells is a common enhanced oil recovery method. Geosteering services are often used for accurate well placement, which makes it possible to achieve a significant increase in production at relatively low cost. This paper describes the result of using seismic data in three-dimensional visualization for high-quality geosteering using a deep boundary detection tool and multilayer inversion in real time. Crossing the top of the reservoir while drilling horizontal sections at the current oilfield is unacceptable, due to the presence of reactive mudstones. In case of crossing the top of reservoir, further work on running and installing the liner becomes impossible due to instability and may lead to well collapse. Based on prewell analysis of the structural data, the well was not supposed to approach the top of the target formation along the planned profile. However, while preparing geosteering model and analyzing seismic data it became possible to reveal that risk, elaborate its mitigation and eventually increase the length of the horizontal section. Such integrated analysis made it possible to maintain the wellbore within the target reservoirs, as well as to update the structural bedding of the top based on the multilayer inversion results.

Recent earthquake sequences at Coso: Evidence for conjugate faulting and stress loading near a geothermal field

1999 ◽  
Vol 89 (3) ◽  
pp. 785-795 ◽  
Author(s):  
Joydeep Bhattacharyya ◽  
Susanna Gross ◽  
Jonathan Lees ◽  
Mike Hastings
Keyword(s):  
Geothermal Field ◽  
Fault System ◽  
Fault Plane Solutions ◽  
Temporal Decay ◽  
Background Seismicity ◽  
Surface Ruptures ◽  
Temporal And Spatial Characteristics ◽  
Coso Geothermal Field ◽  
The One ◽  
Earthquake Sequences

Abstract Two recent earthquake sequences near the Coso geothermal field show clear evidence of faulting along conjugate planes. We present results from analyzing an earthquake sequence occurring in 1998 and compare it with a similar sequence that occurred in 1996. The two sequences followed mainshocks that occurred on 27 November 1996 and 6 March 1998. Both mainshocks ruptured approximately colocated regions of the same fault system. Following a comparison with the background seismicity of the Coso region, we have detected evidence of stress loading within the geothermal field that appears to be in response to the 1998 earthquakes. The ML = 5.2 mainshock in the 1998 sequence occurred at 5:47 a.m. UTC and was located approximately 45 km north of the town of Ridgecrest in the Coso range. The mainshock of the 1996 sequence had an ML magnitude of 5.3. There have been no observable surface ruptures associated with either of these sequences. Though the mainshocks for both sequences were located about 900 m apart and have nearly the same local magnitudes, the sequences differ in both their temporal and spatial characteristics. An analysis of the fault-plane solutions of the mainshocks and the aftershock locations suggests that the two sequences ruptured fault planes that are perpendicular to one another. We observe a much faster temporal decay of the 1998 sequence compared to the one in 1996; moreover, while the 1996 sequence was not followed by any sizeable (i.e., ML &gt; 4.0) aftershocks, the 1998 sequence had four such events. From an estimate of the tectonic stressing rate on the fault that produced the 1998 sequence, we infer a repeat cycle of 135 years for an earthquake of comparable magnitude at Coso.

Sign in / Sign up

Export Citation Format

Share Document