Archaeoseismic Evidence of Surface Faulting in 1703 Norcia Earthquake (Central Italian Apennines, Mw 6.9)

We present the first evidence of surface rupture along the causative fault of the 14 January 1703 earthquake (Mw 6.9, Italian central Apennines). This event was sourced by the ~30 km-long, Norcia fault system, responsible for another catastrophic event in Roman times, besides several destructive earthquakes in the last millennium. A dozen paleoseismological excavations have already investigated the surface ruptures occurred during the Holocene along the Cascia-Mt Alvagnano segments, as well as along secondary splays close to the Medieval Norcia Walls. Remarkably, the master fault bounding the Norcia-Campi basins have never be proved to rupture at the surface. An antique limekiln that was improvidently set across the main fault scarp provides the amazing evidence of an abrupt offset in the 1703 earthquake, which likely occurred during a liming process of carbonate stones. Obviously, the limekiln became useless, and was progressively buried by slope debris. The amount of the offset and the kinematics indicators surveyed in the site allow the strengthening of our knowledge on the seismogenic potential of the Norcia fault system, on its geomorphic rule, and on its impact on the human activities.

Benefits of Defining Geological Sensitive Zones in the Mitigation of Disasters Along Earthquake Fault Zones in Taiwan – The Case of Milun Fault

In Taiwan, the main purpose of earthquake fault zone legislation is to prevent earthquake-related disasters around the surface traces of active faults, particularly in urban areas. Here, the Geologically Sensitive Area (GSA) of the Milun Fault (Milun Earthquake Fault Zone) is used as an example to reveal the importance of such legislation. Field data collected along the Milun Fault before and after the 2018 Hualien Earthquake were used to reveal the reappearance of damages within the GSA. The 2018 Hualien Earthquake represents one of the shortest recurrence intervals (67 years) among all major faults in Taiwan. Most of the surface ruptures and damaged buildings in Hualien City were within the Milun Fault GSA and concentrated on the hanging wall of the fault. Moreover, 61% (91/148) of the damaged buildings and 83% (692/835) of the surface ruptures occurred within 100 m of the fault line. The results of this study demonstrate the importance of defining GSAs of active faults for mitigating earthquake hazards.

Surface Slip Distribution and Earthquake Rupture Model of the Fuyun Fault, China, Based on High-Resolution Topographic Data

The characteristics of earthquake surface ruptures, such as geometry, slip distribution, and coseismic deformation, contain important information about the earthquake rupture process, and so investigations and analyses of earthquake surface rupture have played a crucial role in modern earthquake hazard studies, especially with the increasing availability of high-resolution topographic and imagery data for tectono-geomorphic interpretation. In this study, we use Structure from Motion (SfM) photogrammetry to build a 1 m resolution digital elevation model (DEM) of the fault and combine this with filed observations to map the surface ruptures of the 1931 M8.0 Fuyun earthquake, China. These high-resolution topographic data enable to identify and measure the displaced gullies, and so the rupture locations and along-strike slip distribution are obtained in detail. Four paleoearthquake events are identified through the offset cluster characteristics. The coseismic offset of the 1931 Fuyun earthquake is extracted from the offset distribution, which shows four continuous undulations along the fault strike, corresponding to the four segments of surface rupture. Moreover, a high offset gradient is observed in the step area connected by the rupture segment. These findings, combined with the width and bending angle of the step area at the joint of the rupture segment, indicate that the 1931 Fuyun earthquake was a cascade rupture formed by four rupture segments. This study expands the available offset measurement data of Fuyun fault and confirms the applicability of high-resolution topographic data to active tectonic research.

Seismic Activity of the Manisa Fault Zone in Western Turkey Constrained by Cosmogenic 36Cl Dating

This study reports on the cosmogenic 36Cl dating of two normal fault scarps in western Turkey, that of the Manastır and Mugırtepe faults, beyond existing historical records. These faults are elements of the western Manisa Fault Zone (MFZ) in the seismically active Gediz Graben. Our modeling revealed that the Manastır fault underwent at least two surface ruptures at 3.5 ± 0.9 ka and 2.0 ± 0.5 ka, with vertical displacements of 3.3 ± 0.5 m and 3.6 ± 0.5 m, respectively. An event at 6.5 ± 1.6 ka with a vertical displacement of 2.7 ± 0.4 m was reconstructed on the Mugırtepe fault. We attribute these earthquakes to the recurring MFZ ruptures, when also the investigated faults slipped. We calculated average slip rates of 1.9 and 0.3 mm yr−1 for the Manastır and Mugırtepe faults, respectively.

The Seismogenic Structure of the 2017 Mw 6.9 Milin, Tibet, Earthquake: A Possible Newly Active Fault at the Eastern Himalayan Syntaxis

On 18 November 2017, an Mw 6.9 earthquake occurred in Milin, Tibet, with the epicenter at the top of the Namche Barwa syntaxis. This event did not produce surface ruptures, and its seismogenic structure remains unclear or controversial. Using the locations of the Milin mainshock and aftershocks, locations of regional small earthquakes and focal mechanism solutions from 2007 to 2009, this work analyzed the causative fault and tectonic setting of the Milin earthquake and assessed the regional seismic risk. The results suggest that the seismogenic structure of the Milin earthquake was a secondary fault, the southern branch of the XiXingla fault (XXLF). Within 28 hr after the mainshock, the aftershocks of the Milin event spread northeastward to the secondary north branch fault of the XXLF and the secondary south branch fault of the Palong–Pangxin fault. Across the top of the Namche Barwa syntaxis (Namche Barwa block) and the Chayu block in the southeast, an earthquake dense belt (EDB) has developed. This EDB has similar deep structures beneath the two blocks, in which several northeast-dipping structural planes exit, and different portions of the EDB imply a unified tectonic stress field. Combining these data with the foreshock–mainshock–aftershock data for the 1950 Mw 8.6 Chayu, Tibet, earthquake, we speculate that the structural planes produced by the EDB at depth in the two blocks have already been connected or tended to connect, resulting in a new fault system trending northwest and approximately 280 km long. The 2017 Mw 6.9 Milin earthquake occurred at the northwestern end of this fault system. At present, the development stage, maturity, and fine structure of this new fault system remain unclear but should receive additional attention. Based on its maximum rupture area, this new fault system is capable of generating an Mw 7.7 earthquake in the future.

Holocene surface-rupturing earthquakes on the Dinaric Fault System, western Slovenia

The Dinaric Fault System in western Slovenia, consisting of NW–SE-trending, right-lateral strike-slip faults, accommodates the northward motion of Adria with respect to Eurasia. These active faults show a clear imprint in the morphology, and some of them hosted moderate instrumental earthquakes. However, it is largely unknown if the faults also had strong earthquakes in the late Quaternary. This hampers our understanding of the regional tectonics and the seismic hazard. Geological evidence of co-seismic surface ruptures only exists for one historical event, the 1511 Idrija earthquake with a magnitude of ∼ M 6.8, but the causative fault is still disputed. Here we use geomorphological data, near-surface geophysical surveys, and paleoseismological trenching to study two of these faults: the Predjama Fault and the Idrija Fault. In a paleoseismological trench across the Predjama Fault we found deformation features that may have been caused by an earthquake between 13–0.7 ka, very likely not earlier than 8.4 ka. At the Idrija Fault, a surface-rupturing earthquake happened around 2.5 ka. We show that instrumental and historical seismicity data do not capture the strongest events in this area.

The March 2021 Damasi Earthquake Sequence, Central Greece: Reactivation Evidence across the Westward Propagating Tyrnavos Graben

On 3 March 2021, a strong shallow earthquake affected northern Thessaly, Greece, with an epicenter close to Damasi village causing significant destruction of many stone houses. In this contribution, we provide fieldwork observations, satellite radar interferometry, mapping of the active faults exposed in the epicentral area, liquefactions and coseismic surface ruptures, and preliminary geomorphological analyses of the epicentral area. The geomorphological analysis is based on air photographs, digital surface models analysis, Real-Time Kinematik (RTK) measurements with Global Navigation Satellite System (GNSS) receivers, and data from UAV flight campaigns. Although the seismotectonic setting of the area is complex and there is an apparent mismatch between field and interferometric data, the results of our investigations suggest that at least three fault segments were reactivated by the major shocks of the March seismic sequence. These tectonic structureslikely represent the westward propagation of the Tyrnavos Graben, where newly formed and inherited low-angle faults interplay in a complex manner.

Shortcut Faults and Lateral Spreading Activated in a Pull-Apart Basin by the 2018 Palu Earthquake, Central Sulawesi, Indonesia

Our understanding of pull-apart basins and their fault systems has been enhanced by analog experiments and simulations. However, there has been scarce interest to compare the faults that bound pull-apart basins with surface ruptures during earthquakes. In this study, we investigated the effects of a 2018 earthquake (Mw 7.5) on a pull-apart basin in the Palu–Koro fault system, Sulawesi Island, Indonesia, using geomorphic observations on digital elevation models and optical correlation with pre- and post-earthquake satellite images. A comparison of active fault traces determined by geomorphology with the locations of surface ruptures from the 2018 earthquake shows that some of the boundary faults of the basin are inactive and that active faulting has shifted to basin-shortcut faults and relay ramps. We also report evidence of lateral spreading, in which alluvial fan materials moved around the end of the alluvial fan. These phenomena may provide insights for anticipating the location of future surface ruptures in pull-apart basins.

Shortcut Faults and Lateral Spreading Activated in a Pull-Apart Basin by the 2018 Palu Earthquake, Central Sulawesi, Indonesia

Our understanding of pull-apart basins and their fault systems has been enhanced by analog experiments and simulations. However, there has been no opportunity to compare the faults that constitute pull-apart basins with surface ruptures during earthquakes. In this study, we investigated the effects of a 2018 earthquake (Mw 7.5) on a pull-apart basin in the Palu-Koro fault system, Sulawesi Island, Indonesia, using geomorphic observations in digital elevation models, optical correlation with pre- and post-earthquake satellite images. A comparison of active fault traces determined by geomorphology with the locations of surface ruptures from the 2018 earthquake shows that some of the boundary faults of the basin are inactive and that active faulting has shifted to basin-shortcut faults and relay ramps. We also report evidence of lateral spreading, in which alluvial fan materials moved around the end of the alluvial fan. These phenomena may provide insights for anticipating the location of future surface ruptures in pull-apart basins.