scholarly journals Multiple Lines of Evidence for a Potentially Seismogenic Fault Along the Central-Apennine (Italy) Active Extensional Belt–An Unexpected Outcome of the MW6.5 Norcia 2016 Earthquake

2021 ◽  
Vol 9 ◽  
Author(s):  
Federica Ferrarini ◽  
Rita de Nardis ◽  
Francesco Brozzetti ◽  
Daniele Cirillo ◽  
J Ramón Arrowsmith ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Tectonic Setting ◽  
Central Italy ◽  
Stress Transfer ◽  
Normal Fault ◽  
Normal Faults ◽  
Coulomb Stress ◽  
Seismic Sequence ◽  
Seismogenic Fault ◽  
Seismogenic Source

The Apenninic chain, in central Italy, has been recently struck by the Norcia 2016 seismic sequence. Three mainshocks, in 2016, occurred on August 24 (MW6.0), October 26 (MW 5.9) and October 30 (MW6.5) along well-known late Quaternary active WSW-dipping normal faults. Coseismic fractures and hypocentral seismicity distribution are mostly associated with failure along the Mt Vettore-Mt Bove (VBF) fault. Nevertheless, following the October 26 shock, the aftershock spatial distribution suggests the activation of a source not previously mapped beyond the northern tip of the VBF system. In this area, a remarkable seismicity rate was observed also during 2017 and 2018, the most energetic event being the April 10, 2018 (MW4.6) normal fault earthquake. In this paper, we advance the hypothesis that the Norcia seismic sequence activated a previously unknown seismogenic source. We constrain its geometry and seismogenic behavior by exploiting: 1) morphometric analysis of high-resolution topographic data; 2) field geologic- and morphotectonic evidence within the context of long-term deformation constraints; 3) 3D seismological validation of fault activity, and 4) Coulomb stress transfer modeling. Our results support the existence of distributed and subtle deformation along normal fault segments related to an immature structure, the Pievebovigliana fault (PBF). The fault strikes in NNW-SSE direction, dips to SW and is in right-lateral en echelon setting with the VBF system. Its activation has been highlighted by most of the seismicity observed in the sector. The geometry and location are compatible with volumes of enhanced stress identified by Coulomb stress-transfer computations. Its reconstructed length (at least 13 km) is compatible with the occurrence of MW≥6.0 earthquakes in a sector heretofore characterized by low seismic activity. The evidence for PBF is a new observation associated with the Norcia 2016 seismic sequence and is consistent with the overall tectonic setting of the area. Its existence implies a northward extent of the intra-Apennine extensional domain and should be considered to address seismic hazard assessments in central Italy.

scholarly journals Coulomb stress transfer and fault interaction over millennia on non-planar active normal faults: the Mw 6.5–5.0 seismic sequence of 2016–2017, central Italy

2017 ◽  
Vol 210 (2) ◽  
pp. 1206-1218 ◽  
Author(s):  
Zoe K. Mildon ◽  
Gerald P. Roberts ◽  
Joanna P. Faure Walker ◽  
Francesco Iezzi
Keyword(s):  
Main Shock ◽  
Central Italy ◽  
Stress Transfer ◽  
Historical Record ◽  
Normal Faults ◽  
Coulomb Stress ◽  
Seismic Sequence ◽  
Fault Interaction ◽  
Slip Rates ◽  
Stress Changes

Abstract In order to investigate the importance of including strike-variable geometry and the knowledge of historical and palaeoseismic earthquakes when modelling static Coulomb stress transfer and rupture propagation, we have examined the August–October 2016 A.D. and January 2017 A.D. central Apennines seismic sequence (Mw 6.0, 5.9, 6.5 in 2016 A.D. (INGV) and Mw 5.1, 5.5, 5.4, 5.0 in 2017 A.D. (INGV)). We model both the coseismic loading (from historical and palaeoseismic earthquakes) and interseismic loading (derived from Holocene fault slip-rates) using strike-variable fault geometries constrained by fieldwork. The inclusion of the elapsed times from available historical and palaeoseismological earthquakes and on faults enables us to calculate the stress on the faults prior to the beginning of the seismic sequence. We take account the 1316–4155 yr elapsed time on the Mt. Vettore fault (that ruptured during the 2016 A.D. seismic sequence) implied by palaeoseismology, and the 377 and 313 yr elapsed times on the neighbouring Laga and Norcia faults respectively, indicated by the historical record. The stress changes through time are summed to show the state of stress on the Mt. Vettore, Laga and surrounding faults prior to and during the 2016–2017 A.D. sequence. We show that the build up of stress prior to 2016 A.D. on strike-variable fault geometries generated stress heterogeneities that correlate with the limits of the main-shock ruptures. Hence, we suggest that stress barriers appear to have control on the propagation and therefore the magnitudes of the main-shock ruptures.

scholarly journals On the complexity of surface ruptures during normal faulting earthquakes: excerpts from the 6 April 2009, L'Aquila (central Italy) earthquake (<i>M</i><sub>w</sub> 6.3)

2013 ◽  
Vol 5 (2) ◽  
pp. 2043-2079
Author(s):  
L. Bonini ◽  
D. Di Bucci ◽  
G. Toscani ◽  
S. Seno ◽  
G. Valensise
Keyword(s):  
Surface Deformation ◽  
Central Italy ◽  
Normal Faults ◽  
Normal Faulting ◽  
Seismogenic Fault ◽  
Earthquake Catalogues ◽  
Central Italy Earthquake ◽  
Seismological Data ◽  
Seismogenic Source ◽  
Earthquake Potential

Abstract. Over the past few years the assessment of the earthquake potential of large continental faults has increasingly relied on field investigations. State-of-the-art seismic hazard models are progressively complementing the information derived from earthquake catalogues with geological observations of active faulting. Using these observations, however, requires full understanding of the relationships between seismogenic slip at depth and surface deformation, such that the evidence indicating the presence of a large, potentially seismogenic fault can be singled out effectively and unambiguously. We used observations and models of the 6 April 2009, Mw 6.3, L'Aquila, normal faulting earthquake to explore the relationships between the activity of a large fault at seismogenic depth and its surface evidence. This very well-documented earthquake is representative of mid-size yet damaging earthquakes that are frequent around the Mediterranean Basin, and is somehow paradigmatic of the nature of the associated geologic evidence along with observational difficulties and ambiguities. Thanks to available high-resolution geologic, geodetic and seismological data aided by analogue modeling, we reconstructed the full geometry of the seismogenic source in relation with surface and sub-surface faults. We find that the earthquake was caused by seismogenic slip in the range 3–10 km depth, and that the slip distribution was strongly controlled by inherited discontinuities. We also contend that faulting was expressed at the surface by pseudo-primary breaks resulting from coseismic crustal bending and by sympathetic slip on secondary faults. Based on our results we propose a scheme for hierarchizing normal faults through which all surface occurrences related to faulting at depth can be interpreted in the frame of a single, mechanically coherent model. Appreciating such complexity is crucial to avoid severe over- or under-estimation of the local seismogenic potential.

scholarly journals On the complexity of surface ruptures during normal faulting earthquakes: excerpts from the 6 April 2009 L'Aquila (central Italy) earthquake (<i>M</i><sub>w</sub> 6.3)

Solid Earth ◽  
2014 ◽  
Vol 5 (1) ◽  
pp. 389-408 ◽  
Author(s):  
L. Bonini ◽  
D. Di Bucci ◽  
G. Toscani ◽  
S. Seno ◽  
G. Valensise
Keyword(s):  
Surface Deformation ◽  
Central Italy ◽  
Normal Fault ◽  
Normal Faulting ◽  
Seismogenic Fault ◽  
Geological Evidence ◽  
Central Italy Earthquake ◽  
Seismological Data ◽  
Seismogenic Source ◽  
Earthquake Potential

Abstract. Over the past few years the assessment of the earthquake potential of large continental faults has increasingly relied on field investigations. State-of-the-art seismic hazard models are progressively complementing the information derived from earthquake catalogs with geological observations of active faulting. Using these observations, however, requires full understanding of the relationships between seismogenic slip at depth and surface deformation, such that the evidence indicating the presence of a large, potentially seismogenic fault can be singled out effectively and unambiguously. We used observations and models of the 6 April 2009, Mw 6.3, L'Aquila, normal faulting earthquake to explore the relationships between the activity of a large fault at seismogenic depth and its surface evidence. This very well-documented earthquake is representative of mid-size yet damaging earthquakes that are frequent around the Mediterranean basin, and was chosen as a paradigm of the nature of the associated geological evidence, along with observational difficulties and ambiguities. Thanks to the available high-resolution geologic, geodetic and seismological data aided by analog modeling, we reconstructed the full geometry of the seismogenic source in relation to surface and sub-surface faults. We maintain that the earthquake was caused by seismogenic slip in the range 3–10 km depth, and that the slip distribution was strongly controlled by inherited discontinuities. We also contend that faulting was expressed at the surface by pseudo-primary breaks resulting from coseismic crustal bending and by sympathetic slip on secondary faults. Based on our results we propose a scheme of normal fault hierarchization through which all surface occurrences related to faulting at various depths can be interpreted in the framework of a single, mechanically coherent model. We stress that appreciating such complexity is crucial to avoiding severe over- or under-estimation of the local seismogenic potential.

scholarly journals The first month of the 2016 central Italy seismic sequence: fast determination of time domain moment tensors and finite fault model analysis of the ML 5.4 aftershock

2016 ◽  
Vol 59 ◽  
Author(s):  
Laura Scognamiglio ◽  
Elisa Tinti ◽  
Matteo Quintiliani
Keyword(s):  
Time Domain ◽  
Moment Tensor ◽  
Central Italy ◽  
Model Analysis ◽  
Fault Model ◽  
Normal Faults ◽  
Seismic Sequence ◽  
Moment Tensors ◽  
Finite Fault ◽  
Finite Fault Model

<p>We present the revised Time Domain Moment Tensor (TDMT) catalogue for earthquakes with M_L larger than 3.6 of the first month of the ongoing Amatrice seismic sequence (August 24th - September 25th). Most of the retrieved focal mechanisms show NNW–SSE striking normal faults in agreement with the main NE-SW extensional deformation of Central Apennines. We also report a preliminary finite fault model analysis performed on the larger aftershock of this period of the sequence (M_w 5.4) and discuss the obtained results in the framework of aftershocks distribution.</p>

scholarly journals Seismogenesis in Central Apennines, Italy: an integrated analysis of minor earthquake sequences and structural data in the Amatrice-Campotosto area

2009 ◽  
Vol 47 (6) ◽  
Author(s):  
P. Boncio ◽  
G. Lavecchia ◽  
G. Milana ◽  
B. Rozzi
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Normal Fault ◽  
Structural Data ◽  
Integrated Analysis ◽  
Fault Plane Solutions ◽  
Small Magnitude ◽  
Fault Surface ◽  
Displacement Profile ◽  
Earthquake Sequences

We present a seismotectonic study of the Amatrice-Campotosto area (Central Italy) based on an integrated analysis of minor earthquake sequences, geological data and crustal rheology. The area has been affected by three small-magnitude seismic sequences: August 1992 (M=3.9), June 1994 (M=3.7) and October 1996 (M=4.0). The hypocentral locations and fault plane solutions of the 1996 sequence are based on original data; the seismological features of the 1992 and 1994 sequences are summarised from literature. The active WSWdipping Mt. Gorzano normal fault is interpreted as the common seismogenic structure for the three analysed sequences. The mean state of stress obtained by inversion of focal mechanisms (WSW-ENE-trending deviatoric tension) is comparable to that responsible for finite Quaternary displacement, showing that the stress field has not changed since the onset of extensional tectonics. Available morphotectonic data integrated with original structural data show that the Mt. Gorzano Fault extends for ~28 km along strike. The along-strike displacement profile is typical of an isolated fault, without significant internal segmentation. The strong evidence of late Quaternary activity in the southern part of the fault (with lower displacement gradient) is explained in this work in terms of displacement profile readjustment within a fault unable to grow further laterally. The depth distribution of seismicity and the crustal rheology yield a thickness of ~15 km for the brittle layer. An area of ~530 km2 is estimated for the entire Mt. Gorzano Fault surface. In historical times, the northern portion of the fault was probably activated during the 1639 Amatrice earthquake (I = X, M~ 6.3), but this is not the largest event we expect on the fault. We propose that a large earthquake might activate the entire 28 km long Mt. Gorzano Fault, with an expected Mmax up to 6.7.

Sequential modelling of the 2016 Central Italy earthquake cluster using multisource satellite observations and quantitative assessment of Coulomb stress change

2020 ◽  
Vol 221 (1) ◽  
pp. 451-466 ◽  
Author(s):  
Qian Xu ◽  
Qiang Chen ◽  
Jingjing Zhao ◽  
Xianwen Liu ◽  
Yinghui Yang ◽  
...  
Keyword(s):  
Surface Deformation ◽  
Central Italy ◽  
Normal Fault ◽  
Satellite Observations ◽  
Fault System ◽  
Potential Zone ◽  
Seismic Zone ◽  
Seismogenic Fault ◽  
Positive Effects ◽  
Sequence Of Events

SUMMARY A sequence of earthquake events consisting of three large shocks occurred in Central Italy from August to October in 2016 with the duration of almost 2 months. The preliminary study on the seismic mechanism suggests that the sequence of events is the result from the activity of the SW dipping Mt Bove–Mt Vettore–Mt Gorzano normal fault system. For investigation and understanding of the coseismic faulting of the seismogenic fault alignment, we collect a set of comprehensive satellite observations including the Sentinel-1A, ALOS-2/PALSAR-2 and GPS data to map the coseismic surface deformation and estimate the source models in this study. The derived faulting model for the first Amatrice event is characterized by two distinct slip asperities suggesting that it is a predominantly normal dip-slip motion with slight strike-slip component. The second event, Visso earthquake is almost a purely normal rupture. The third Norcia event is dominated by the normal dip-slip rupture of the seismogenic fault, and has propagated up to the ground with significant slip. The three faulting models are then utilized to quantify the Coulomb failure stress (CFS) change over the seismic zone. First, the CFS change on the subsequent two seismogenic faults of the earthquake sequence is estimated, and the derived positive CFS change induced by the preceding earthquakes suggests that the early events have positive effects on triggering the subsequent seismicity. We then explore the response relation of the aftershocks including 961 events with magnitudes larger than M 3.0 to the CFS change over the seismic zone. It suggests that the rupture pattern of the aftershocks is similar to the major shocks with predominantly normal dip-slip. To assess the risk of the future seismic hazard, we analyse quantitatively the spatial distribution of aftershock occurrence and CFS transfer at the seismogenic depth, indicating that the ruptures of the three major shocks do partly release the accumulated strain on the associated fault alignment as well as the dense aftershock, but the CFS increase zone with few aftershocks in the southwest of the eastern Quaternary fault alignment of Central Italy poses the potential of further rupture. In particular, the distribution of aftershock migration also suggests that the north extension of the Mt Bove fault is the potential zone with rupture risk.

scholarly journals Neoproterozoic (Torridonian) alluvial fan succession, northwest Scotland, and its tectonic setting and provenance

2001 ◽  
Vol 138 (2) ◽  
pp. 161-184 ◽  
Author(s):  
GEORGE E. WILLIAMS
Keyword(s):  
Tectonic Setting ◽  
Normal Fault ◽  
Source Area ◽  
Alluvial Fan ◽  
Normal Faults ◽  
Main Body ◽  
The West ◽  
The North ◽  
Divergent Flow ◽  
Laurentian Margin

The presence of alluvial fan deposits in the lower Neoproterozoic Torridon Group in northwest Scotland illuminates Torridonian basin development at the eastern Laurentian margin. The 450 m thick Cape Wrath Member of the Applecross Formation consists of alluvial fan conglomerate and arkose succeeded by more distal, braidplain feldspathic sandstone. Palaeocurrent data comprising >2650 measurements on trough cross-bedding are of low variability and show overall eastward flow. The projection upcurrent of regionally divergent flow directions for the lower part of the member indicates a fan of c. 50 km radius with its apex 30 km to the west near a basement (pre-Caledonian) normal fault with downthrow to the east beneath the north Minch Basin. Extensional tectonics controlled deposition of the Applecross Formation. Regional uplift, causing erosion of a youthful topography on the Lewisian Gneiss, was followed by the development of the Applecross extensional basin in two main stages. Uplift of a western source area by movement on basin-bounding normal faults occurred first in the north and caused pediplanation and alluvial fan deposition in the Cape Wrath area, with subsequent uplift of the source area for the main body of the Applecross Formation occurring further to the west and south along the line of the Minch Fault. The bulk of the Applecross Formation was derived from a weathered terrain of felsic crystalline and related supracrustal rocks reaching from the Outer Hebrides region westward for up to c. 250 km onto what are now the continental margins of the North Atlantic. The tectonic events may mark an early phase in the crustal extension that led ultimately to the opening of the Iapetus ocean.

scholarly journals Late Quaternary faulting in southern Matese (central Italy): implications for earthquake potential in the southern Apennines

2021 ◽  
Author(s):  
Paolo Boncio ◽  
Eugenio Auciello ◽  
Vincenzo Amato ◽  
Pietro Aucelli ◽  
Paola Petrosino ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Slip Rate ◽  
Normal Fault ◽  
Historical Earthquakes ◽  
Fault System ◽  
Southern Apennines ◽  
Mountain Front ◽  
Point Data ◽  
Earthquake Potential

Abstract. We studied in detail the Gioia Sannitica active normal fault (GF) along the Southern Matese Fault system in the southern Apennines of Italy. The current activity of the fault system and its potential to produce strong earthquakes have been underestimated so far, and are now defined. Precise mapping of the GF fault trace on a 1 : 20,000 geological map and several point data on geometry, kinematics and throw rate are made available in electronic format. The GF, and in general the entire fault system along the southern Matese mountain front, is made of slowly-slipping faults, with a long active history revealed by the large geologic offsets, mature geomorphology, and complex fault pattern and kinematics. Present activity has resulted in Late Quaternary fault scarps resurrecting the foot of the mountain front, and Holocene surface faulting. The slip rate varies along-strike, with maximum Late Pleistocene – Holocene throw rate of ~0.5 mm/yr. Activation of the 11.5 km-long GF can produce up to M 6.1 earthquakes. If activated together with the 18 km-long Ailano-Piedimonte Matese fault (APMF), the seismogenic potential would be M 6.8. The slip history of the two faults is compatible with a contemporaneous rupture. The observed Holocene displacements on the GF and APMF are compatible with activations during some poorly known historical earthquakes, such as the 1293 (M 5.8), 1349 (M 6.8; southern prolongation of the rupture on the Aquae Iuliae fault?) and CE 346 earthquakes. A fault rupture during the 847 poorly-constrained historical earthquake is also compatible with the dated displacements.

Sign in / Sign up

Export Citation Format

Share Document