scholarly journals Rekayasa Klasifikasi Pencarian Abstrak Tentang Mikrokontroler e-Journal Instek dengan Algoritma Naive Bayes

2020 ◽  
Vol 1 (1) ◽  
pp. 34-45
Author(s):  
Faisal ◽  
A.MUHAMMAD SYAFAR ◽  
UMMI AZIZAH MUKADDIM

Abstrak Objektif. Jurnal Instek merupakan jurnal elektronik yang ada di Teknik Informatika UIN Alauddin Makassar. E-Journal merupakan representasi elektronik sederhana dari jurnal. Dalam kebanyakan kasus peningkatan volume informasi yang berbentuk E-Journal menimbulkan kesulitan untuk mengelompokkan E-Journal sesuai dengan kategorinya. Berdasarkan hal tersebut maka dirancang sebuah website untuk mengelompokkan E-Journal agar sesuai dengan kateogrinya, pengelompokkan E-Journal terdiri dari empat kategori yaitu, Data Mining, Game, Multimedia, dan Sistem Informasi, sehingga mempermudah seseorang untuk mengelompokkan E-Journal sesuai dengan kategorinya. Material and Metode.. Dalam penelitian ini, jenis penelitian yang digunakan adalah penelitian deskriptif kualitatif adapun metode kualitatif. Adapun metode perancangannya menggunakan unified modeling (UML). Analisis yang dilakukan mencakup analisis sistem yang berjalan dan analisi sistem yang diusulkan. Hasil. Hasil penelitian ini berupa website yang dapat mengelompokkan E-Journal berdasarkan klasifikasi. Sistem yang dibangun menggunakan algoritma Naïve Bayes untuk mengelompokkan atau mengklasifikasikan E-Journal. Kesimpulan.. Berdasarkan hasil perhitungan Klasifikasi sampel data 1 diperoleh 0,0666 sebagai jumlah tertinggi dengan kategori Mikrokontroller. Abstrak Objektive. Instek Journal is an electronic journal in the Informatics Engineering UIN Alauddin Makassar. E-Journal is a simple electronic representation of a journal. In most cases an increase in the volume of information in the form of an E-Journal makes it difficult to group the E-Journal according to its category. Based on this, a website is designed to classify E-Journal to fit its category, the grouping of E-Journal consists of four categories, namely, Data Mining, Games, Multimedia, and Information Systems, making it easier for someone to group E-Journal according to its category. Materials and Methode. In this research, the type of research used is descriptive qualitative research as for the qualitative method. The design method uses unified modeling (UML). The analysis carried out includes analysis of the running system and analysis of the proposed system. Results. The results of this study in the form of a website that can classify E-Journal based on classification. The system is built using the Naïve Bayes algorithm to classify or classify E-Journal. Conclusion Based on the calculation results of the classification of sample data 1 obtained 0.0666 as the highest number with the category of microcontroller

Tech-E ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 44
Author(s):  
Rino Rino

Heart disease is a condition of the presence of fatty deposits in the coronary arteries in the heart which changes the role and shape of the arteries so that blood flow to the heart is obstructed. Data mining methods can predict this disease, some of the methods are C4.5 Algorithm and Naive Bayes which are often used in research.The data set in this research was obtained from the uci machine learning repository site, where the dataset has 3546 records and 13 attributes.The accuracy value of the Naïve Bayes algorithm has a high value of 81.40% compared to the C4.5 algorithm which only has an accuracy value of 79.07%. Based on the calculation results, it can be concluded that the Naïve Bayes Algorithm is a very good clarification because it has a value between 0.709 - 1.00.From conclusion above, the Naïve Bayes algorithm has a higher accuracy value than the C4.5 algorithm so the researchers decided to use the Naïve Bayes algorithm in predicting heart disease.


2021 ◽  
Vol 5 (3) ◽  
pp. 527-533
Author(s):  
Yoga Religia ◽  
Amali Amali

The quality of an airline's services cannot be measured from the company's point of view, but must be seen from the point of view of customer satisfaction. Data mining techniques make it possible to predict airline customer satisfaction with a classification model. The Naïve Bayes algorithm has demonstrated outstanding classification accuracy, but currently independent assumptions are rarely discussed. Some literature suggests the use of attribute weighting to reduce independent assumptions, which can be done using particle swarm optimization (PSO) and genetic algorithm (GA) through feature selection. This study conducted a comparison of PSO and GA optimization on Naïve Bayes for the classification of Airline Passenger Satisfaction data taken from www.kaggle.com. After testing, the best performance is obtained from the model formed, namely the classification of Airline Passenger Satisfaction data using the Naïve Bayes algorithm with PSO optimization, where the accuracy value is 86.13%, the precision value is 87.90%, the recall value is 87.29%, and the value is AUC of 0.923.


2020 ◽  
Vol 12 (2) ◽  
pp. 104-107
Author(s):  
Nurhayati . ◽  
Nuraeny Septianti ◽  
Nani Retnowati ◽  
Arief Wibowo

Data processing is imperative for the development of information technology. Almost any field of work has information about data. The data is made use of the analysis of the job. Nowadays, information data is imperatively processed to help workers in making decisions. This study discusses student prediction graduation rates by using the naïve Bayes method. That aims at providing information to college if they can use it properly to utilize the data of students who graduated by processing data mining. Based on the data mining process, steps founded that used producing information, namely predicting student graduation on time. The method of this study is Naïve Bayes with classification techniques. At this study, researchers used a six-phase data mining process of industry crossing standards in data mining known as CRISP-DM. The results of research concluded that the application of the Naive Bayes algorithm uses 4 (four) parameters namely ips, ipk, the number of credits, and graduation by getting an accuracy value of 80.95%.


Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2067
Author(s):  
Nilsa Duarte da Silva Lima ◽  
Irenilza de Alencar Nääs ◽  
João Gilberto Mendes dos Reis ◽  
Raquel Baracat Tosi Rodrigues da Silva

The present study aimed to assess and classify energy-environmental efficiency levels to reduce greenhouse gas emissions in the production, commercialization, and use of biofuels certified by the Brazilian National Biofuel Policy (RenovaBio). The parameters of the level of energy-environmental efficiency were standardized and categorized according to the Energy-Environmental Efficiency Rating (E-EER). The rating scale varied between lower efficiency (D) and high efficiency + (highest efficiency A+). The classification method with the J48 decision tree and naive Bayes algorithms was used to predict the models. The classification of the E-EER scores using a decision tree using the J48 algorithm and Bayesian classifiers using the naive Bayes algorithm produced decision tree models efficient at estimating the efficiency level of Brazilian ethanol producers and importers certified by the RenovaBio. The rules generated by the models can assess the level classes (efficiency scores) according to the scale discretized into high efficiency (Classification A), average efficiency (Classification B), and standard efficiency (Classification C). These results might generate an ethanol energy-environmental efficiency label for the end consumers and resellers of the product, to assist in making a purchase decision concerning its performance. The best classification model was naive Bayes, compared to the J48 decision tree. The classification of the Energy Efficiency Note levels using the naive Bayes algorithm produced a model capable of estimating the efficiency level of Brazilian ethanol to create labels.


2021 ◽  
Vol 328 ◽  
pp. 04011
Author(s):  
Alwin Ali ◽  
Amal Khairan ◽  
Firman Tempola ◽  
Achmad Fuad

The amount of rainfall that occurs cannot be determined with certainty, but it can be predicted or estimated. In predicting the potential for rain, data mining techniques can be used by classifying data using the naive Bayes method. Naïve Bayes algorithm is a classification method using probability and statistical methods. The purpose of this study is how to implement the naive Bayes method to predict the potential for rain in Ternate City, and be able to calculate the accuracy of the Naive Bayes method from system created. The highest calculation results with new data with a total of 400 training data and 30 test data, obtained 30 correct data with 100% precision, 100% recall and 100% accuracy and the lowest calculation results with new data with a total of 500 training data and 50 test data, obtained 38 correct data and 12 incorrect data with a percentage of precision 61.29%, recall 100% and accuracy 76%.


2020 ◽  
Vol 4 (3) ◽  
pp. 117
Author(s):  
Hardian Oktavianto ◽  
Rahman Puji Handri

Breast cancer is one of the highest causes of death among women, this disease ranks second cause of death after lung cancer. According to the world health organization, 1 million women get a diagnosis of breast cancer every year and half of them die, in general this is due to early treatment and slow treatment resulting in new cancers being detected after entering the final stage. In the field of health and medicine, machine learning-based classification has been carried out to help doctors and health professionals in classifying the types of cancer, to determine which treatment measures should be performed. In this study breast cancer classification will be carried out using the Naive Bayes algorithm to group the types of cancer. The dataset used is from the Wisconsin breast cancer database. The results of this study are the ability of the Naive Bayes algorithm for the classification of breast cancer produces a good value, where the average percentage of correctly classified data reaches 96.9% and the average percentage of data is classified as incorrect only 3.1%. While the level of effectiveness of classification with naive bayes is high, where the average value of precision and recall is around 0.96. The highest precision and recall values are when the test data uses a percentage split of 40% with the respective values reaching 0.974 and 0.973.


2021 ◽  
Vol 5 (1) ◽  
pp. 32
Author(s):  
Hartatik Hartatik

<p>Abstrak :</p><p>Prediksi tentang status kelulusan mahasiswa menjadi persoalan tersendiri di perguruan tinggi. Perguruan tinggi utamanya di era Big Data sangatlah penting untuk melakukan prediksi perilaku akademik mahasiswa aktif sehingga dapat di ketahui kemungkinan mahasiswa bisa studi secara tepat waktu serta dapat diketahui langkah preventive dalam membuat prpgram perencanaan. Salah satu cara yang digunakan adalah teknik data mining yaitu menggunakan Algoritma <em>naive bayes</em>. Algoritma <em>Naive bayes</em> merupakan salah satu metode yang digunakan untuk memprediksi kelulusan mahasiswa.  Peneliti  dalam hal ini menerapkan  metode  <em>Naive bayes</em> menggunakan parameter Indeks prestasi kumulatif( IPK) dan membandingkan dengan menggunakan prediksi <em>naive bayes methods</em> berdasarkan parameter IPK dan sosial parameter yaitu jenis kelamin dan status tinggal. Dalam penelitian ini menggunakan parameter akademis  dan dilakukan optimasi menggunakan parameter sosial yang melekat pada mahasiswa. Berdasarkan hasil evaluasi untuk mendapatkan akurasi, hasil dari penelitian ini mendapatkan nilai akurasi untuk metode <em>Naive bayes</em>  sebesar 75% dan akurasi untuk model prediksi dengan parameter sosial  sebesar 85% dengan selisih akurasi 10%.</p><p>__________________________</p><p>Abstract : </p><p><em>Predictions about a student's graduation status are a problem in college. Major tertiary institutions in the era of Big Data are very important to predict the behavior of active students so that they can find out the possibility of students in a timely manner and can determine preventive steps in making program planning. One method used is data mining techniques using the Naive bayes Algorithm. The Naive bayes algorithm is one of the methods used to predict student graduation. Researchers in this case applied the Naive bayes method using the cumulative achievement index (GPA) parameter and compared using the prediction of the Naive bayes method based on the GPA parameters and social parameters, namely gender and status. This study uses academic parameters and is carried out optimally using social parameters inherent in students. Based on the results of the evaluation to get an accuracy value, the results of this study get an accurate value for the Naive bayes method of 75% and accurate for prediction models with social parameters of 85% with a difference of 10%.</em></p>


Author(s):  
Ade Riani ◽  
Yessy Susianto ◽  
Nur Rahman

Heart disease is a disease with a high mortality rate in the world of health. The disease is usually rarely realized the cause. However, there are several parameters that can be used to predict whether a person has a risk of heart disease or not. As for this study, researchers will use several indicators including Age, Sex, Chest pain type, Trestbps, Cholesterol, Fasting blood sugar, Resting ECG, Max heart rate, Exercise-induced angina, Oldpeak, Slope, Number of vessels coloured, and Thal This research will perform calculations using the Data Mining method with the Naive Bayes Algorithm. The results of this study get an accuracy of 86% for the 303 datasets tested. 


Author(s):  
Oman Somantri ◽  
Dyah Apriliani

<p>Conducting an assessment of consumer sentiments taken from social media in assessing a culinary food gives useful information for everyone who wants to get this information especially for migrants and tourists, in th other hand that information is very valuable for food stall and restaurant owners as information in improvinf food quality. Overcoming this problem, a sentiment analysis classification model using naïve bayes algorithm (NB) was applied to get this information. This problem occurs is the level of accuracy of classification of consumer ratings of culinary food is still not optimal because the weight of values in the data preprocessing process are not optimal. In this paper proposed a hybrid feature selection models to overcome the problems in the process of selecting the feature attributes that have not been optimal by using a combination of information gain (IG) and genetic algorithm (GA) algorithms. The result of this research showed that after the experiment and compared to using others algorithms produce the best of the level occuracy is 93%.</p>


Sign in / Sign up

Export Citation Format

Share Document