scholarly journals Evaluation of Reservoir Fluids Mobility, Mauddud Reservoir (Albian), Khabbaz Oil Field, Kirkuk Area, NE Iraq

2021 ◽  
Vol 54 (2B) ◽  
pp. 42-54
Author(s):  
Basim Al-Qayim
Keyword(s):  
Water Saturation ◽  
Laboratory Data ◽  
Oil Field ◽  
Neutron Density ◽  
Produce Water ◽  
Porosity Variation ◽  
Average Porosity ◽  
Resistivity Logs ◽  
Bulk Volume ◽  
Porosity Logs

The Albian Mauddud reservoir of the Khabbaz Oil Field is consisting of 170 m alternating shelf carbonates and pervasive dolomite horizons of coarse to fine crystalline mosaic. Core analysis and log measurements reveal the occurrence of three electrofacies units (A, B, and C) with variable petrophysical properties. Unit A with good reservoir quality shows average porosity of 18.8 % and average permeability of 27.5 md. The other two units (B and C) are less attractive and have an average porosity of 9.6 % and 9.2 % consequently. Pore size ranges between macro to meso types and related mainly to vugs, fractures and intercrystalline porosity, especially in the dolomite units. The reservoir fluids saturation, bulk volume, and mobility are evaluated using resistivity logs measurements and porosity logs (Neutron-Density porosities) in addition to other reservoir laboratory data. Calculations and cross data plotting of the related petrophysical parameters were applied to the three units of the Mauddud reservoir in seven wells of the field. It shows an overall good reservoir fluids mobility. Results indicate that the formation water of Khabbaz Oil Feld is a non-movable type especially for the crestal wells which make most of these wells produce water-free hydrocarbon. Variability within well’s hydrocarbon mobility is noticed and related to units and subunits lithology and porosity variation. Other variations seem to be related mainly to permeability, pores geometry and variability of water saturation in addition to the location of well with respect to oil pool within the field structure.

scholarly journals Characterization of Mishrif Formation Reservoir in Amara Oil Field, Southeast Iraq, Using Geophysical Well-logging

2021 ◽  
pp. 4702-4711
Author(s):  
Asmaa Talal Fadel ◽  
Madhat E. Nasser
Keyword(s):  
Reservoir Characterization ◽  
Gamma Ray ◽  
Water Saturation ◽  
Total Porosity ◽  
Effective Porosity ◽  
Oil Field ◽  
Neutron Density ◽  
Reservoir Water ◽  
Resistivity Logs ◽  
Reliable Knowledge

     Reservoir characterization requires reliable knowledge of certain fundamental properties of the reservoir. These properties can be defined or at least inferred by log measurements, including porosity, resistivity, volume of shale, lithology, water saturation, and permeability of oil or gas. The current research is an estimate of the reservoir characteristics of Mishrif Formation in Amara Oil Field, particularly well AM-1, in south eastern Iraq. Mishrif Formation (Cenomanin-Early Touronin) is considered as the prime reservoir in Amara Oil Field. The Formation is divided into three reservoir units (MA, MB, MC). The unit MB is divided into two secondary units (MB1, MB2) while the unit MC is also divided into two secondary units (MC1, MC2). Using Geoframe software, the available well log images (sonic, density, neutron, gamma ray, spontaneous potential, and resistivity logs) were digitized and updated. Petrophysical properties, such as porosity, saturation of water, saturation of hydrocarbon, etc. were calculated and explained. The total porosity was measured using the density and neutron log, and then corrected to measure the effective porosity by the volume content of clay. Neutron -density cross-plot showed that Mishrif Formation lithology consists predominantly of limestone. The reservoir water resistivity (Rw) values of the Formation were calculated using Pickett-Plot method.   

Evaluation of Reservoir’s Petrophysical Parameters, Niger Delta, Nigeria

2017 ◽  
Vol 5 (1) ◽  
pp. 19
Author(s):  
Ubong Essien ◽  
Akaninyene Akankpo ◽  
Okechukwu Agbasi
Keyword(s):  
Niger Delta ◽  
Gamma Ray ◽  
Water Saturation ◽  
Petrophysical Parameters ◽  
Niger Delta Region ◽  
Average Porosity ◽  
Irreducible Water Saturation ◽  
Open Hole ◽  
Bulk Volume ◽  
Niger Delta Basin

Petrophysical analysis was performed in two wells in the Niger Delta Region, Nigeria. This study is aimed at making available petrophysical data, basically water saturation calculation using cementation values of 2.0 for the reservoir formations of two wells in the Niger delta basin. A suite of geophysical open hole logs namely Gamma ray; Resistivity, Sonic, Caliper and Density were used to determine petrophysical parameters. The parameters determined are; volume of shale, porosity, water saturation, irreducible water saturation and bulk volume of water. The thickness of the reservoir varies between 127ft and 1620ft. Average porosity values vary between 0.061 and 0.600; generally decreasing with depth. The mean average computed values for the Petrophysical parameters for the reservoirs are: Bulk Volume of Water, 0.070 to 0.175; Apparent Water Resistivity, 0.239 to 7.969; Water Saturation, 0.229 to 0.749; Irreducible Water Saturation, 0.229 to 0.882 and Volume of Shale, 0.045 to 0.355. The findings will also enhance the proper characterization of the reservoir sands.

scholarly journals HYDROCARBON POTENTIALITY OF FACHA RESERVOIR IN ASWAD OIL FIELD, SIRT BASIN, LIBYA

2020 ◽  
Vol 3 (1) ◽  
pp. 62-77
Author(s):  
A. A. Kushlaf ◽  
A. E. El Mezweghy
Keyword(s):  
Water Saturation ◽  
Oil Field ◽  
Reservoir Rock ◽  
Physical Parameters ◽  
Structural Framework ◽  
Average Porosity ◽  
Average Water ◽  
Exploratory Wells ◽  
Hydrocarbon Potentiality ◽  
Sirt Basin

This paper is to study the structural framework, stratigraphy, and the petro-physical characteristics of Facha reservoir of Gir Formation in Aswad oil field, which is located in Block NC74B at the Zella Trough, south-west of Sirt basin, Libya. The data used have been got from well-logging records of nine exploratory wells distributed in Aswad oil field. These data have been analyzed and interpreted through using analytical cross-plots in order to calculate the petro-physical parameters. The results revealed that the lithological facies consists mainly of dolomite. Moreover, they revealed that the lateral distribution of the petro-physical parameters of Facha reservoir indicates that average porosity is 10-23%, average water saturation is 52- 93%, and net pay is of 62.44 ft. This shows that Facha member is a good reservoir rock. The variations in values between wells have been affected by the trend of faults; this indicates that the area is structurally controlled.

scholarly journals Petrophysical Properties and Digenetic Evolution of Shuaiba Formation in Nasiriyah Oil Field, Southern Iraq

2021 ◽  
pp. 4810-4818
Author(s):  
Marwah H. Khudhair
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Middle Part ◽  
Effective Porosity ◽  
Oil Field ◽  
Neutron Density ◽  
Petrophysical Properties ◽  
Secondary Porosity ◽  
Primary Porosity ◽  
Gamma Ray Log

     Shuaiba Formation is a carbonate succession deposited within Aptian Sequences. This research deals with the petrophysical and reservoir characterizations characteristics of the interval of interest in five wells of the Nasiriyah oil field. The petrophysical properties were determined by using different types of well logs, such as electric logs (LLS, LLD, MFSL), porosity logs (neutron, density, sonic), as well as gamma ray log. The studied sequence was mostly affected by dolomitization, which changed the lithology of the formation to dolostone and enhanced the secondary porosity that replaced the primary porosity. Depending on gamma ray log response and the shale volume, the formation is classified into three zones. These zones are A, B, and C, each can be split into three rock intervals in respect to the bulk porosity measurements. The resulted porosity intervals are: (I) High to medium effective porosity, (II) High to medium inactive porosity, and (III) Low or non-porosity intervals. In relevance to porosity, resistivity, and water saturation points of view, there are two main reservoir horizon intervals within Shuaiba Formation. Both horizons appear in the middle part of the formation, being located within the wells Ns-1, 2, and 3. These intervals are attributed to high to medium effective porosity, low shale content, and high values of the deep resistivity logs. The second horizon appears clearly in Ns-2 well only.

scholarly journals Petrophysical Properties of Nahr Umar Formation in Nasiriya Oil Field

2020 ◽  
Vol 21 (3) ◽  
pp. 9-18
Author(s):  
Ahmed Abdulwahhab Suhail ◽  
Mohammed H. Hafiz ◽  
Fadhil S. Kadhim
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Oil Field ◽  
Well Logs ◽  
High Porosity ◽  
Reservoir Properties ◽  
Petrophysical Parameters ◽  
Resistivity Logs ◽  
Lithology Prediction ◽  
Porosity And Permeability

   Petrophysical characterization is the most important stage in reservoir management. The main purpose of this study is to evaluate reservoir properties and lithological identification of Nahr Umar Formation in Nasiriya oil field. The available well logs are (sonic, density, neutron, gamma-ray, SP, and resistivity logs). The petrophysical parameters such as the volume of clay, porosity, permeability, water saturation, were computed and interpreted using IP4.4 software. The lithology prediction of Nahr Umar formation was carried out by sonic -density cross plot technique. Nahr Umar Formation was divided into five units based on well logs interpretation and petrophysical Analysis: Nu-1 to Nu-5. The formation lithology is mainly composed of sandstone interlaminated with shale according to the interpretation of density, sonic, and gamma-ray logs. Interpretation of formation lithology and petrophysical parameters shows that Nu-1 is characterized by low shale content with high porosity and low water saturation whereas Nu-2 and Nu-4 consist mainly of high laminated shale with low porosity and permeability. Nu-3 is high porosity and water saturation and Nu-5 consists mainly of limestone layer that represents the water zone.

Joint petrophysical interpretation of multidetector nuclear measurements in the presence of invasion, shoulder-bed, and well-deviation effects

Geophysics ◽  
2017 ◽  
Vol 82 (1) ◽  
pp. D13-D30 ◽  
Author(s):  
Edwin Ortega ◽  
Mathilde Luycx ◽  
Carlos Torres-Verdín ◽  
William E. Preeg
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Total Porosity ◽  
Neutron Density ◽  
Layer By Layer ◽  
Fluid Type ◽  
Fluid Properties ◽  
Radial Length ◽  
Neutron Porosity ◽  
Porosity Logs

Recent advances in logging-while-drilling sigma measurements include three-detector thermal-neutron and gamma-ray decay measurements with different radial sensitivities to assess the presence of invasion. We have developed an inversion-based work flow for the joint interpretation of multidetector neutron, density, and sigma logs to reduce invasion, shoulder-bed, and well-deviation effects in the estimation of porosity, water saturation, and hydrocarbon type, whenever the invasion is shallow. The procedure begins with a correction for matrix and fluid effects on neutron and density-porosity logs to estimate porosity. Multidetector time decays are then used to assess the radial length of the invasion and estimate the virgin-zone sigma while simultaneously reducing shoulder-bed and well-deviation effects. Density and neutron porosity logs are corrected for invasion and shoulder-bed effects using two-detector density and neutron measurements with the output from the time-decay (sigma) inversion. The final step invokes a nuclear solver in which corrected sigma, inverse of migration length, and density in the virgin zone are used to estimate water saturation and fluid type. The fluid type is assessed with a flash calculation and Schlumberger’s Nuclear Parameter calculation code to account for the nuclear properties of different types of hydrocarbon and water as a function of pressure, temperature, and salinity. Results indicate that accounting for invasion effects is necessary when using density and neutron logs for petrophysical interpretation beyond the calculation of total porosity. Synthetic and field examples indicate that the mitigation of invasion effects becomes important in the case of salty mud filtrate invading gas-bearing formations. The advantage of the developed inversion-based interpretation method is its ability to estimate layer-by-layer petrophysical, compositional, and fluid properties that honor multiple nuclear measurements, their tool physics, and their associated borehole geometrical and environmental effects.

Water saturation and permeability from resistivity, dielectric, and porosity logs

Geophysics ◽  
1995 ◽  
Vol 60 (6) ◽  
pp. 1756-1764 ◽  
Author(s):  
Olivar A. L. de Lima
Keyword(s):  
Volume Fraction ◽  
Water Saturation ◽  
Laboratory Data ◽  
Type Equation ◽  
Oil Well ◽  
Exchange Cation ◽  
Potiguar Basin ◽  
Porosity Logs ◽  
New Equation ◽  
Type Parameter

An analytical approach previously proposed to model the electrical properties of shaly sands has been adapted to obtain the cementation exponent (m), the water saturation [Formula: see text], and the shaliness distribution from electromagnetic and porosity log measurements in an oil well. Shaliness is described by the clay volume fraction (p) and by the clay type parameter [Formula: see text] in the sand. For a shale‐coating structure these parameters can be related to the exchange cation density [Formula: see text]. Based on an equivalent flow regime inside this granular model, a Kozeny‐Carman type equation has been derived, expressing the intrinsic permeability (k) of the medium in terms of a porosity‐tortuosity factor [Formula: see text] and of the parameter [Formula: see text]. The power‐law derived expression shows that k decreases with the amount of clay, not only because a high [Formula: see text] implies a narrowing of the pore channels, but also because it modifies the hydraulic tortuosity of the medium. This new equation has been statistically tested with extensive petrophysical laboratory data for different types of sandstones and satisfactorily applied to core and log data of an oil well from Potiguar Basin, Rio Grande do Norte, Brazil.

scholarly journals GEOPHYSICAL AND WELL CORELLATION ANALYSIS OF OGO FIELD: A CASE STUDY IN NIGER DELTA BASIN OF NIGERIA

2017 ◽  
Vol 36 (3) ◽  
pp. 729-733
Author(s):  
MO Ehigiator ◽  
NC Chigbata
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Average Porosity ◽  
Resistivity Logs ◽  
Hydrocarbon Formation ◽  
Formation Resistivity ◽  
Well Correlation ◽  
Niger Delta Basin ◽  
4D Seismic ◽  
Bottom To Top

A suite of geophysical wire line logs were run in hole. The wells data were acquired from bottom to top and not top to bottom. Basically, we have the qualitative and the quantitative evaluation techniques.Qualitative means is usually used for identification of the type of lithology and also for the component of the formation. Quantitative is used to estimate numerically, the value of what is in the formation. The logs used for evaluation were: Spontaneous potential logs and the Gamma ray logs. These were used to determine the lithology of the formation. Resistivity logs were run in hole to also determine the water saturation in the formation. The Formation Density and the compensated Neutron logs were run in hole to differentiate the gaseous zone from the oil zone in the Hydrocarbon Formation Ogo1, Ogo2 and Ogo3 from well correlation depicts that the subsurface stratigraphy is that of sand – shale intercalations.  Two prominent hydrocarbon bearing reservoirs (R1and R2), at Depth 1563m and 1642mm respectively were identified. The reservoirs were found to have average porosity of 0.22, water saturation 0.43 and Hydrocarbon saturation of 0.57. The reservoirs have permeability of 1376m, volume of oil in place for reservoir 1 and 2 is 39900m3  and 9647 m3   respectively. More. Well correlations are recommended for proper drilling and well completions. 4D seismic acquisitions should be encouraged for proper view of the formation. http://dx.doi.org/10.4314/njt.v36i3.10

scholarly journals Petrophysical Properties and Well Log Interpretations of Tertiary Reservoir in Khabaz Oil Field / Northern Iraq

2020 ◽  
Vol 26 (6) ◽  
pp. 18-34
Author(s):  
Yousif Najeeb Abdul-majeed ◽  
Ahmad Abdullah Ramadhan ◽  
Ahmed Jubiar Mahmood
Keyword(s):  
Water Saturation ◽  
Total Porosity ◽  
Effective Porosity ◽  
Oil Field ◽  
Neutron Density ◽  
Petrophysical Properties ◽  
Secondary Porosity ◽  
Northern Iraq ◽  
Sonic Log ◽  
Oil Concentration

The aim of this study is interpretation well logs to determine Petrophysical properties of tertiary reservoir in Khabaz oil field using IP software (V.3.5). The study consisted of seven wells which distributed in Khabaz oilfield. Tertiary reservoir composed from mainly several reservoir units. These units are : Jeribe, Unit (A), Unit (A'), Unit (B), Unit (BE), Unit (E),the Unit (B) considers best reservoir unit because it has good Petrophysical properties (low water saturation and high porous media ) with high existence of hydrocarbon in this unit. Several well logging tools such as Neutron, Density, and Sonic log were used to identify total porosity, secondary porosity, and effective porosity in tertiary reservoir. For Lithological identification for tertiary reservoir units using (NPHI-RHOB) cross plot composed of dolomitic-limestone and mineralogical identification using (M/N) cross plot consist of calcite and dolomite. Shale content was estimated less than (8%) for all wells in Khabaz field. CPI results were applied for all wells in Khabaz field which be clarified movable oil concentration in specific units are: Unit (B), Unit (A') , small interval of Jeribe formation , and upper part of Unit (EB).

scholarly journals Petrophysical Analysis of Well Logs for Asmari Reservoir in Abu Ghirab Oil Field, South Eastern Iraq

2020 ◽  
pp. 2979-2990
Author(s):  
Buraq Adnan Al-Baldawi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Bulk Water ◽  
Computer Processing ◽  
Oil Field ◽  
Well Logs ◽  
Asmari Formation ◽  
Petrophysical Properties ◽  
Resistivity Logs ◽  
Environmental Corrections

The present study includes the evaluation of petrophysical properties and lithological examination in two wells of Asmari Formation in Abu Ghirab oil field (AG-32 and AG-36), Missan governorate, southeastern Iraq. The petrophysical assessment was performed utilizing well logs information to characterize Asmari Formation. The well logs available, such as sonic, density, neutron, gamma ray, SP, and resistivity logs, were converted into computerized data using Neuralog programming. Using Interactive petrophysics software, the environmental corrections and reservoir parameters such as porosity, water saturation, hydrocarbon saturation, volume of bulk water, etc. were analyzed and interpreted. Lithological, mineralogical, and matrix recognition studies were performed using porosity combination cross plots. Petrophysical characteristics were determined and plotted as computer processing interpretation (CPI) using Interactive Petrophysics program. Based on petrophysical properties, Asmari Reservoir in Abu Ghirab oil field is classified into three sub formations: Jeribe/ Euphrates and Kirkuk group which is divided into two zones: upper Kirkuk zone, and Middle-Lower Kirkuk zone. Interpretation of well logs of Asmari Formation indicated a commercial Asmari Formation production with medium oil evidence in some ranges of the formation, especially in the upper Kirkuk zone at well X-1. However, well X-2, especially in the lower part of Jeribe/ Euphrates and Middle-Lower Kirkuk zone indicated low to medium oil evidence. Lithology of Asmari Formation demonstrated a range from massive dolomite in Jeribe/ Euphrates zone to limestone in upper Kirkuk zone and limestone and sandstone in middle-lower Kirkuk zone, whereas mineralogy of the reservoir showed calcite and dolomite with few amounts of anhydrite.

Sign in / Sign up

Export Citation Format

Share Document