DESAIN SARANA BAWA ALAT PERKEBUNAN

ABSTRACTGardening is an activity cultural ancestors which has been passed down from generation to generation that is on the face of this earth until humans are present. Gardening can not only be done on vast land but also in the yard of the house. The large number of garden tools such as sputters, chainsaws, sekateur, hand scrapers, hand forks, and machetes. carrying a special bag to make things easier bring the equipment is before the equipment is only placed in a backpack along with other equipment, so it must be unpacked when the equipment will be used. then often every time using gardening tools but after wearing it we sometimes forget to put and left behind after being used to scattered and cluttered everywhere.Therefore it is necessary to create special means to carry and tidy up the plantation equipment. The design method used is collecting data, analyze the data, determine the design concept, create alternative design, developing alternative designs, to final design. To that end, with the "design of plantation tool bag", users can carry and store gardening equipment, with a more ergonomic design, and aesthetically modern.Keywords: gardening, bag, take, tools.

Download Full-text

DESAIN SARANA BAWA OLAHRAGA SUMPIT

Jurnal Kreatif : Desain Produk Industri dan Arsitektur ◽

10.46964/jkdpia.v6i1.33 ◽

2020 ◽

Vol 6 (1) ◽

Author(s):

Andi Farid Hidayanto ◽

Fuad Azmi

Keyword(s):

Design Method ◽

Design Concept ◽

Alternative Design ◽

Final Design

Abstrak Menyumpit adalah sebuah kegiatan yang dilakukan suku Dayak untuk berburu. Di Kalimantan timur terdapat Festival Erau yang betujuan melestarikan budaya kutai. Di ajang perlombaan tersebut para peserta lomba menyumpit kesulitan membawa sumpit yang sangat panjang saat berlomba. Motif Dayak adalah merupakan perpaduan antara suatu pola dasar yang memiliki artinya masing-masing, kemudian dikreasikan dalam berbagai perpaduan beberapa motif dasar sehingga menjadi satu kesatuan rangkaian makna yang berarti. Penulis ingin mendesain tas sumpit, yaitu wadah untuk membawa peralatan sumpit tersebut. Metode perancangan yang dilakukan yaitu melakukan pengumpulan data, analisa data, menentukan konsep desain, membuat desain alternatif, mengembangkan desain alternatif, hingga desain akhir. Untuk itu dengan adanya “Desain Sarana Bawa Olahraga Sumpit”, peserta lomba dapat membawa sumpit dengan nyaman dan aman saat berlomba dengan desain yang ergonmis serta estetis, karena sarana bawa ini memiliki motif Dayak Kalimantan Timur. Dilengkapi dengan konfigurasi yang teratur dan rapi, dan mengutamakan kenyamanan dan keamanan bagi peserta lomba. Sehingga semua dapat terakomodir dalam tas. Kata kunci: sumpit, tas, olahraga, dayak Abstract Blowguns are an activity that Dayak tribes do to hunt. In eastern Kalimantan there is the Erau Festival which aims to preserve the culture of Kutai. In contest, the competitors contend with the difficulty of carrying very long Blowguns while competing. Dayak motif is a combination of an archetype that has its own meaning, then creation in various combinations of several basic motives that become a unity meaning meaningful circuit. The author wants to design a Blowgun bag, the container to carry the Blowguns. The design method is to collect data, analyze the data, determine the design concept, create alternative design, develop alternative design, until the final design. For that with the "Design Of Blowgun Sport Bag", users can carry Blowguns comfortably and safely while competing with ergonomic and aesthetic designs, because the vehicle has East Dayak motifs. Equipped with an orderly and neat configuration, and prioritizes comfort and safety for the users. So that all can be accommodated in the bag. Keywords: Blowguns, bags, sports, Dayak

Download Full-text

DESAIN SARANA KERJA MENJAHIT

Jurnal Kreatif : Desain Produk Industri dan Arsitektur ◽

10.46964/jkdpia.v6i1.34 ◽

2020 ◽

Vol 6 (1) ◽

Author(s):

Darius Shyafary ◽

Ameliya Mamesah

Keyword(s):

Data Analysis ◽

Design Concept ◽

Ergonomic Design ◽

Alternative Design ◽

Complete Work ◽

Final Design ◽

Designing Method

Abstrak Menjahit merupakan sebuah kerajinan tangan yang menggunakan jarum dan benang untuk mengikat sesuatu atau menyambungkan sesuatu, akan tetapi agar kegiatan menjahit menjadi lebih mudah tentunya ada beberapa persiapan yang harus direncanakan secara matang seperti mempersiapkan peralatan menjahit secara lengkap, menyediakan sarana atau tempat membuat pola, memotong pola, menyetrika kain yang menyediakan kebutuhan penjahit dalam bekerja secara lengkap sehingga penulis ingin mendesain “ Desain Sarana Kerja Menjahit” yang dapat meringankan pekerjaan penjahit. Metode perancangan yang dilakukan yaitu dengan melakukan pengumpulan data, analisis data, menentukan konsep desain, membuat desain alternatif, mengembangkan desain alternatif, mengembangkan desain alternatif, hingga desain akhir. Untuk itu, dengan adanya “Desain Sarana Kerja Menjahit” pengguna dapat melakukan aktivitas menjahit secara mudah dengan desain yang lebih ergonomis, dan estetis yang bernuansa modern dilengkapi dengan konfigurasi yang teratur dan rapi, serta mengutamakan kenyamanan dan keamanan bagi pengguna sehingga semua dapat terakomodir dalam satu produk. Kata kunci : Menjahit, modern, peralatan menjahit. Abstract Sewing is a handicraft that uses needles and threads to tie something or connect something, but for sewing activities to be easier there must be some preparations that must be carefully planned such as preparing complete sewing equipment, providing a means or place to make patterns, cut patterns, ironing stitched fabrics, and a special table for sewing. Currently there is still no product that provides tailor needs in complete work so that the author wants to design "Sewing desing Working Facility" which can ease the tailor's work. Designing method is done by doing data, data analysis, determine the design concept, create alternative design, develop alternative design, develop alternative design, until the final design. For that purpose, with "Sewing Working Facility" users can easily tailor activities with a more ergonomic design, and the aesthetically modern nuances are equipped with a neat and orderly configuration, and give priority to the comfort and safety of the users so that all can be accommodated in one product. Keywords: Sewing, modern, sewing equipment.

Download Full-text

DESAIN SARANA BAWA PERALATAN OLAHRAGA ANGGAR UNTUK KEPERLUAN LATIHAN RUTIN

Jurnal Kreatif : Desain Produk Industri dan Arsitektur ◽

10.46964/jkdpia.v5i2.47 ◽

2020 ◽

Vol 5 (2) ◽

Author(s):

Royke Vincentius ◽

Ilosa Dwi H

Keyword(s):

Martial Arts ◽

Design Method ◽

Design Concept ◽

Alternative Design ◽

Data Collecting ◽

Final Design ◽

Is Design ◽

High Skill

AbstractFencing is a martial arts using weapons that had been develoed into an agility sport with weapons that emphasize on ability techniques such as cutting, stabbing or fending off opponent's weapons by using the skill in utilizing hand agility. In order to gain high skill the athletes must do routine exercises. For the purpose the athletes need some carrying device that is design accordingly. The research conduct in order to design specific carrying device for this specific purposes. The design method begin with data collecting, analysing the data, determine the design concept, create alternative design, develop alternative design, until the final design. A special carrying device for placing the fencing equipment is then designed for specific purpose that is for routine exercise. Equipped with a regular and neat configuration, and prioritizes comfort and security for users the carrying device is design adopting the Vintage style, for a more luxurious, elegant, yet traditional.Keywords: fencing, evintage, fencing equipment, carrying tool.

Download Full-text

The coastal design of the Sumur Tiga beach as a coastal tourism destination

IOP Conference Series Earth and Environmental Science ◽

10.1088/1755-1315/879/1/012020 ◽

2021 ◽

Vol 879 (1) ◽

pp. 012020

Author(s):

M Kamal ◽

D R Anwar

Keyword(s):

East Coast ◽

Design Concept ◽

Sea Waves ◽

Coastal Tourism ◽

Economic Sectors ◽

Environmental Preservation ◽

Wind Speeds ◽

Final Design ◽

Quantitative Descriptive ◽

Alternative Designs

Abstract The East Coast of Weh Island, Aceh has good ecological conditions with high coral fish biomass. The coastal tourism activities spread over the east coast of Weh Island, especially at Sumur Tiga Beach. The tourism activities in Weh Island especially Sumur Tiga Beach can certainly contribute to the development and economic sectors and also have an impact on the surrounding environment. Thus, an alternative landscape design is needed for structuring the site to create environmental preservation, and sustainable tourism. This study aims to identify the elements and characteristics of the site, analyze-synthesize the potential and constraints of its coastal landscape, and create the concept and design of the landscape. The study was located in Sumur Tiga Beach, Sabang City, Ie Maulee District, Sukajaya Village, Weh Island, Aceh. The method includes several aspects, such as physical and biophysical, tourism, social, and hydro oceanography which is using both qualitative and quantitative descriptive and spatial analysis. The basic concept is “Adat ngon hukom lagee dzat ngon sifeuet” which is implemented into three concepts, such as hablumminallah, hablumminannas, and hablumminalalam. This concept is used to determine the design concept. then the development concept and block plan are determined then used as a reference in developing alternative designs for the site. And from these alternatives, the final design for the site is concluded. The design concept is a metaphor of “Ragam Hias” refer to the Acehnese motifs, such as pucuk reubong, awan si on, awan meucanek, putra taloe dua, and sulur. Such as gazebo, main gate, main hall, main signage by a form that comes from a pucuk reubong motif with the additional pattern of acehnese culture, also plantation and circulation patterns using a combination of pucuk reubong, awan si on, awan meucanek, putra taloe dua, and sulur motifs. There are also seawalls on the shoreline to avoid abrasion due to high sea waves and wind speeds that blow quite fast during the east season.

Download Full-text

Development of a Novel Double-Ring Deployable Mesh Antenna

International Journal of Antennas and Propagation ◽

10.1155/2012/375463 ◽

2012 ◽

Vol 2012 ◽

pp. 1-10 ◽

Cited By ~ 10

Author(s):

Yan Xu ◽

Fuling Guan ◽

Xian Xu ◽

Hongjian Wang ◽

Yao Zheng

Keyword(s):

Low Frequency ◽

Design Concept ◽

Design Parameters ◽

Accuracy Measurement ◽

Double Ring ◽

Reflective Surface ◽

Final Design ◽

Geometric Relationship ◽

Relationship Of ◽

Adjustment Test

This paper addresses a type of deployable mesh antenna consisting of the double-ring deployable truss edge frame and the cable net reflector. The structural design concept of the deployable antennas is presented. The deployable truss is designed and the geometric relationship of each strut length is formulated. Two types of radial truss elements are described and compared. The joint pattern and the active cables of the final design concept are determined. The pattern of the cable net is the three-orientation grid. Two connection schemes between the reflector and the deployable edge frame are investigated. The design parameters and the shape adjustment mechanism of this cable net are determined. The measurement test technologies of the antennas on the ground including test facilities, deployment test, and measurement and adjustment test are proposed. The antenna patterns are analyzed based on the real surfaces of the reflector obtained by the reflective surface accuracy measurement. The tests and analytic results indicated that the accuracy of the reflective surface is high and is suitable for low-frequency communication.

Download Full-text

HOTEL RESORT DI TELAGA SARANGAN

Arsitektura ◽

10.20961/arst.v14i1.9164 ◽

2017 ◽

Vol 14 (1) ◽

Author(s):

Dewi Saraswati ◽

Ahmad Farkhan ◽

Amin Sumadyo

Keyword(s):

Architectural Design ◽

Negative Impact ◽

Design Method ◽

Building Design ◽

Problem Formulation ◽

Design Concept ◽

Preliminary Design ◽

Literature Study ◽

Initial Idea ◽

Resort Hotel

The design of Sarangan Lake resort done by the needs of tourist on its area, unfullfield of tourist needs on accommodation facilities, increasing number of uncare building towards negative impact to the environment, so the purpose from this design is to get a building design that could provide accommodation facilities to the tourist of Sarangan Lake, with the design that concern about environment. The design issue is how ecological architect can be applied into design of Sarangan Lake resort. Design method is using architectural design, started from initial idea, preliminary understanding of architecture about the planned object, research and problem formulation, literature study as substantial reference, data analysis and information, analysis of general and specific approach towards designed object and formulation of design concept, analysis of design concept approach which more specific about the to-be-designed object, and architectural design transformation and preliminary design as well. The result is a design concept of resort hotel facilities as lodging accommodations by applying the characteristic of the ecological architect to the building design.

Download Full-text

Space for Place

10.26686/wgtn.14811219 ◽

2021 ◽

Author(s):

Annabel Childs

Keyword(s):

Social Identity ◽

Built Environment ◽

Public Space ◽

Spatial Differentiation ◽

Final Design ◽

The Face ◽

Harbour Water ◽

Rich Sense ◽

Attachment To Place ◽

Spatial Identity

The consequence of homogenised place is becoming a growing concern across New Zealand’s built environment (Najafi, 2011). In a time where placelessness, sameness and architectural standardization threaten the concept of spatial identity, there is an opportunity to research further into how we can design to maintain cultural and spatial differentiation within New Zealand’s cities. Wellington City is New Zealand’s capital, it is an old city with copious layers of topographic and environmental depth. With the harbour water and undulating terrain greatly contributing to the city’s identity, the somewhat disenfranchised population that occupy Wellingtons Streets are lacking this connection to place. This research is looking to defend the notion of a bounded place through reinterpreting our architectural identity. This research searches for continuity in the face of change, where takings from the environment’s past and present will come together to create one unified future identity. This thesis investigates design opportunities within Wellington’s Civic square, design explorations and interventions seek to encourage and foster a rich sense of attachment to place. Architectural qualities are used as tools, with which to think through and create connections around which people actively create identities. The final design outcome aims to facilitate discussion of those qualities of public space that encourage and sustain concern for Wellington’s social identity and its contribution to a sense of place.

Download Full-text

Urban Ensembles: An integrated approach to design in steep, urban landscapes

10.26686/wgtn.17008027.v1 ◽

2021 ◽

Author(s):

◽

Myren Burnett

Keyword(s):

Architectural Design ◽

Landscape Architecture ◽

Design Method ◽

Methodological Approach ◽

Strong Relationship ◽

Integrated Approach ◽

Urban Site ◽

Urban Landscapes ◽

Final Design ◽

Urban Terrain

Urban Ensembles explores the way in which landscape and architecture can be employed together within the design of a steep, urban site. Lyttelton is a small port town on the border of Christchurch, settled in the foothills of a harbour formed by a major volcanic eruption. This rugged setting, with steeply sloping urban terrain, presents an interesting challenge when designing an urban development. The site was badly damaged in a series of earthquakes in 2010-2011, and many of the town’s oldest buildings, heritage structures dating back to the colonial settlement era, were destroyed. This has left a void in the heart of Lyttelton, and caused the loss of much of the tourism business that the town relies upon for its income. This thesis takes a methodological approach to the design of landscape architecture on such a challenging site. A range of techniques are explored, drawing from both landscape and architecture to explore the roles that each discipline plays in the design of urban spaces. The frequent imbalance between disciplines is addressed both through the literature review and design method, as this landscape architecture thesis draws on architectural design as a tool for generating spaces which fall somewhere in between the two ideals of interior and exterior. The final design proposal is an alternative rebuild plan for the central business area to the south of London St, and also addresses the relationships between that site and the surrounding context, both urban and environmental. The aim of this design is to create a series of interconnected spaces which have a strong relationship to the surrounding harbour setting, and also to facilitate development of the pedestrian spaces throughout the block and encouraging the development of activity at the street level, through the interface between buildings and landscape.

Download Full-text

The House Reformed: A Reaction to Suburban Monotony

10.26686/wgtn.17019665 ◽

2021 ◽

Author(s):

◽

Florence Mangan

Keyword(s):

Design Method ◽

Well Being ◽

Mass Scale ◽

Life Styles ◽

Hands On ◽

Final Design ◽

Manual Methods ◽

The Aesthetic ◽

House Design ◽

Made In

Joyless rows of monotonous houses are be- ginning to define the suburban typology of tomorrow. Quality and innovation is being compromised for speed and quantity and there is a distinct lack of consideration for the home’s potential to enrich and influence the life-styles and well-being of its occupants. This thesis is a reaction to the researcher’s dis- satisfaction with New Zealand’s suburban typology and seeks to identify and demonstrate an alternative design approach. The research- er considers that a house should enable its occupants to flourish by instigating moments of joy and surprise whilst maximising economy of space. The thesis uses an investigative research method of five different design tests. Each test reveals strategies to aid the approach of designing the suburban typology, focusing on maximising joy, surprise and economy of space. Both digital and manual methods are used, revealing their respective strengths and flaws. The Digital method used in the Data House and Rigid x Fluid house tests lacked the ability to apply tangible aesthetic qualities to a de- sign. The manual hands on method of used in the Patchwork House and House Reformed tests was hugely beneficial for the aesthetic qualities of design, however it lacked the rigor and capacity to apply individuality on a mass scale. Discoveries made in the thesis investigations are collated in a final design outcome, the House Reformed. This house design demonstrates a compilation of the successful strategies identified in the research and reveals the benefits of approaching home design with qualities of joy, surprise and economy of space. The most successful strategies used to achieve these aims were establishing a great- er connection with the outdoors, providing flexible spaces through the use of innovative partitions and furniture and injecting unexpected aesthetic moments through the use of interesting texture and colour. Overall the research reveals a successful de- sign outcome and provides interesting in- sights into design method. It explores worth- while questions and issues related to the lived domestic experience such as the lack of joy, surprise and economy of space in suburban housing and demonstrates the importance of designing with such qualities.

Download Full-text