Release characteristics and water washing of heavy metals from electroplating sludge during low-temperature drying

2021 ◽  
Vol 236 ◽  
pp. 76-87
Author(s):  
Huaiyu Liu ◽  
Xiaoting Hong ◽  
Keming Wu ◽  
Kwan San Hui
2018 ◽  
Vol 69 (3) ◽  
pp. 571-574
Author(s):  
Mihaela Andreea Mitiu ◽  
Maria Iuliana Marcus ◽  
Maria Vlad ◽  
Cristina Mihaela Balaceanu

This paper presents the results of the research activity in order to etablish the stability and leaching potential of ceramic tiles which have been developed using glazes colored with pigments obtained by the extraction of chromium and iron metals from electroplating sludge. All these ceramic tiles contain various amounts of heavy metals in their glazes due to the pigments composition. The ceramic samples have been subjected to leaching tests in order to detect if various elements of relevance such as chromium, lead, cadmium, zinc or iron migrated to any great extent into test solutions. Leaching tests have been performed following the international standard SR ISO 10545-15 method for specific metals leaching into 4% acetic acid solutions at 220C after a 24h period and the international standard SR EN 12457/1-4 method with distilled water as leaching agent at LSR of 10 l/kg, for 24h period. Amounts of heavy metals have been negligible or non-detectable (iron) in the leaching solutions, being well below the limit values established by the legislation in force.


1979 ◽  
Vol 22 (6) ◽  
pp. 1439-1443 ◽  
Author(s):  
I. J. Ross ◽  
O. J. Loewer ◽  
G. M. White

2015 ◽  
Vol 39 (3) ◽  
pp. 237-246 ◽  
Author(s):  
Odoli Cyprian ◽  
Minh Van Nguyen ◽  
Kolbrun Sveinsdottir ◽  
Asbjorn Jonsson ◽  
Gudjon Thorkelsson ◽  
...  

Processes ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 375
Author(s):  
Timilehin Martins Oyinloye ◽  
Won Byong Yoon

We investigated the effect of chlorine dioxide (ClO2) under low temperature drying to suppress rice cake stickiness during the cutting process by initiating the onset of retrogradation until the stickiness is minimized for shelf-life extension. The intermittent ClO2 application at low-temperature drying was conducted at 10 °C for different drying periods (0, 6, 12, 18, and 24 h). Texture analysis showed significant differences with increasing values of hardness (901.39 ± 53.87 to 12,653 ± 1689.35 g) and reduced values of modified adhesiveness (3614.37 ±578.23 to 534.81 ± 89.37 g). The evaluation of rice cake stickiness during the cutting process revealed an optimum drying period of 18 h with no significant difference (p ≤ 0.05) compared to the 24 h drying process. Microbial contamination during the drying process increased, with microbial load from 6.39 ± 0.37 to 7.94 ± 0.29 CFU/g. Intermittent ClO2 application at 22 ppm successfully reduced the microbial load by 63% during drying process. The inhibitory property of ClO2 was further analyzed on a sample with high initial microbial load (3.01 ± 0.14 CFU/g) using primary and modified secondary growth models fitted to all experimental storage temperatures (5–25 °C) with R2 values > 0.99. The model demonstrated a strong inhibition by ClO2 with microbial growth not exceeding the accepted population threshold (106 CFU/g) for toxin production. The shelf-life of rice cake was increased by 86 h and 432 h at room temperature (25 °C) and 5 °C respectively. Microbial inactivation via ClO2 treatment is a novel method for improved food storage without additional thermal sterilization or the use of an additional processing unit.


2003 ◽  
Vol 21 (3) ◽  
pp. 539-554 ◽  
Author(s):  
V. Sosle ◽  
G. S. V. Raghavan ◽  
R. Kittler

RSC Advances ◽  
2017 ◽  
Vol 7 (28) ◽  
pp. 17095-17106 ◽  
Author(s):  
Nan Sun ◽  
Wenxin Shi ◽  
Lixin Ma ◽  
Shuili Yu

Attapulgite (ATP) is a type of natural magnesium aluminum silicate mineral and has been applied as an adsorbent to remove organic pollutants and heavy metals in aqueous solution.


1972 ◽  
Vol 15 (2) ◽  
pp. 0310-0316 ◽  
Author(s):  
Peter D. Bloome and Gene C. Shove

Sign in / Sign up

Export Citation Format

Share Document