scholarly journals Thermal Conductivity of Teak Wood from Thinned Stands

2021 ◽  
Vol 6 (2) ◽  
pp. 49-53
Author(s):  
Veriawan Setyo Wibowo ◽  
Joko Sulistyo
Keyword(s):  
Thermal Conductivity ◽  
Moisture Content ◽  
Longitudinal Direction ◽  
Tree Age ◽  
Fiber Direction ◽  
Heat Conductor ◽  
Plantation Forest ◽  
Result Show ◽  
Dry Conditions ◽  
Teak Wood

Wood has been utilized as a heat conductor or insulator. Hence, this research aims to discover the thermal conductivity of teak wood using thinned stands from the Perhutani plantation forest. The samples obtained had varying moisture content and fiber direction, and were of distinct tree ages, at 12, 15, 20, 25, and 60 years. This result show that the thermal conductivity in air-dry conditions and fiber saturation points were 0.116 to 0.128 and 0.338 to 0.151 in W/Mk, respectively. The analysis of variance showed that the thermal conductivity of teak wood was affected by the interaction of fiber directions and moisture content but not significantly by tree age. Also, there was a weak relationship found between thermal conductivity and specific gravity in air-dry conditions and longitudinal direction.

Properties of Gliricidia Wood (Gliricidia sepium) lntercropped with Cocoa (Theobroma cocoa) in Malaysia

2014 ◽  
Vol 11 (1) ◽  
pp. 51
Author(s):  
Mohd Helmy Ibrahim ◽  
Mohd Nazip Suratman ◽  
Razali Abd Kader
Keyword(s):  
Cell Wall ◽  
Specific Gravity ◽  
Moisture Content ◽  
Wall Thickness ◽  
Age Groups ◽  
Gliricidia Sepium ◽  
Cell Wall Thickness ◽  
Tree Age ◽  
Lumen Diameter ◽  
Significant Difference

Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia sepium is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G. sepium at three intervals according to age groups ( three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years ofage as compared to five (0.41) and three (0.35) years age group with a mean of 0.43 (p<0.05). Mean moisture content was 58.3% with no significant difference existing between the tree age groups. Fibre diameter (22.4 mm) was significantly lower (p<0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 mm and 24. 7 mm), respectively. Means of fibre length, lumen diameter and cell wall thickness were 0.83 mm, 18.3 mm, and 6.2 mm, respectively, with no significant differences detected between trees in all age groups. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G.sepium may have the potential for insulation board manufacturing and paper making. However, future studies should experiment the utilisation of this species for these products to determine its full potential.

ANALYSIS OF SOUND SPEED IN LONGITUDINAL DIRECTION AT REFERENCE MOISTURE CONTENT (w = 12 %) IN SAWMILL ASSORTMENTS (FAGUS SYLVATICA, L.)

Akustika ◽  
2020 ◽  
pp. 45-50
Author(s):  
Alena Rohanová
Keyword(s):  
Moisture Content ◽  
Modulus Of Elasticity ◽  
Dynamic Modulus ◽  
Sound Speed ◽  
Longitudinal Direction ◽  
Structural Timber ◽  
Sound Speeds ◽  
Dynamic Modulus Of Elasticity ◽  
Round Timber

This paper explores the analysis of sound speeds in the longitudinal direction and their reduction to the reference moisture content w = 12 %. The sound speed cw was determined with Sylvatest Duo device. Moisture content of beech sawmill assortments (round timber: N = 16, logs: N = 2 × 16, structural boards: N = 54) in the range of 12 – 72 % was measured. For the analysis purposes, the sound speed was converted to reference conditions (c12, uref = 12%). A second-degree polynomial (parabola) with a regression equation of the form: c// = 5649 - 27,371 × w + 0.0735 × w2 was used to convert cw to c12, and correction of measured and calculated values was used as well. The sound speeds c12 in sawmill assortments (c12,round, c12,log, c12,board) were evaluated by linear dependences. Dependence was not confirmed for c12,round and c12,board1 (r = 0.168), in contrast for c12,round and c12,log2 the dependence is statistically very significant (r = 0.634). The results of testing showed that the most suitable procedure for predicting quality of structural timber is the first step round timber – log2, the second step: log2 - board2. More exact results of the construction boards were obtained from log2 than from log1. The sound speed is used in the calculation of dynamic modulus of elasticity (Edyn). EN 408 mentions the possibility of using dynamic modulus of elasticity as an alternative method in predicting the quality of structural timber.

scholarly journals Influence of Temperature and Moisture Content on Thermal Performance of Green Roof Media

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2421
Author(s):  
Bohan Shao ◽  
Caterina Valeo ◽  
Phalguni Mukhopadhyaya ◽  
Jianxun He
Keyword(s):  
Thermal Conductivity ◽  
Moisture Content ◽  
Green Roof ◽  
Green Roofs ◽  
Power Functions ◽  
Thick Substrate ◽  
Different Temperatures ◽  
Test Cells ◽  
Substrate Moisture ◽  
Phase Transition Zone

The influence of moisture content on substrate thermal conductivity at different temperatures was investigated for four different commercially available substrates for green roofs. In the unfrozen state, as moisture content increased, thermal conductivity increased linearly. In the phase transition zone between +5 and −10 °C, as temperature decreased, thermal conductivity increased sharply during the transition from water to ice. When the substrate was frozen, thermal conductivity varied exponentially with substrate moisture content prior to freezing. Power functions were found between thermal conductivity and temperature. Two equally sized, green roof test cells were constructed and tested to compare various roof configurations including a bare roof, varying media thickness for a green roof, and vegetation. The results show that compared with the bare roof, there is a 75% reduction in the interior temperature’s amplitude for the green roof with 150 mm thick substrate. When a sedum mat was added, there was a 20% reduction in the amplitude of the inner temperature as compared with the cell without a sedum mat.

Anomalous thermal expansion behaviors of wood under dry and low-temperature conditions

Holzforschung ◽  
2014 ◽  
Vol 68 (5) ◽  
pp. 567-574 ◽  
Author(s):  
Tsunehisa Miki ◽  
Hiroyuki Sugimoto ◽  
Yuzo Furuta ◽  
Ichinori Shigematsu ◽  
Kozo Kanayama
Keyword(s):  
Thermal Expansion ◽  
Linear Thermal Expansion ◽  
Longitudinal Direction ◽  
Mechanical Analysis ◽  
Solid Wood ◽  
Compression Pressure ◽  
Thermal Expansion Behavior ◽  
Expansion Behavior ◽  
Dry Conditions ◽  
Anomalous Thermal Expansion

Abstract The thermal expansion behavior of dry solid wood was investigated by dynamic dilatometry and thermal mechanical analysis. Anomalous thermal expansion behavior was observed concerning the displacement change under a constant compression pressure, which was not previously reported. Wood submitted to temperatures below 0°C under dry conditions exhibited a large increment in the linear thermal expansion coefficient (CLTE) and a sudden drop in the CLTE around 50°C as well as above 130°C during heating. In subsequent cooling/heating processes, these anomalous behaviors remained at temperatures below 100°C, although less pronounced, and disappeared at temperatures above 100°C. These behaviors were clearly perceptible in the radial and tangential directions but not in the longitudinal direction. The CLTE depended strongly on the heat and moisture history of the samples and the effects are species-specific.

Measuring the Thermo-Technical Parameters of Autoclaved Aerated Concrete

2016 ◽  
Vol 824 ◽  
pp. 100-107 ◽  
Author(s):  
Alena Struhárová
Keyword(s):  
Thermal Conductivity ◽  
Moisture Content ◽  
Physical Properties ◽  
Bulk Density ◽  
Capillary Absorption ◽  
Measuring Device ◽  
Technical Parameters ◽  
Autoclaved Aerated Concrete ◽  
Aerated Concrete ◽  
Technical Properties

Bulk density and moisture content are factors that significantly affect the physical properties of autoclaved aerated concrete (AAC) including thermal conductivity and other thermo-technical characteristics. This article shows the results of measurements of compressive strength, capillary absorption, water absorption and porosity of AAC (ash on fluidized fly ash) at different bulk density and also the results of thermal conductivity of AAC at different bulk density and variable moisture content of the material. The thermo-technical properties were measured using the Isomet 2104, a portable measuring device. Acquired results demonstrate dependence of physical properties including thermal conductivity of AAC on bulk density and moisture content. The reliability and accuracy of the method of measuring was also shown.

The influence of moisture content on the thermal conductivity of external thermal mortars

2017 ◽  
Vol 135 ◽  
pp. 279-286 ◽  
Author(s):  
M. Glória Gomes ◽  
I. Flores-Colen ◽  
L.M. Manga ◽  
A. Soares ◽  
J. de Brito
Keyword(s):  
Thermal Conductivity ◽  
Moisture Content

scholarly journals Thermal conductivity and deformation of Taxodium hybrid ‘Zhongshanshan’ during heat transfer process

BioResources ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 2645-2655
Author(s):  
Yuehua Zhu ◽  
Yaoli Zhang ◽  
Biao Pan
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Moisture Content ◽  
Transfer Process ◽  
Dimensional Change ◽  
Testing Temperature ◽  
Scientific Basis ◽  
Heat Transfer Process ◽  
Wood Moisture Content ◽  
Wood Moisture

The thermal conductivity and the deformation of wood from the Taxodium hybrid ‘Zhongshanshan’ were studied in the process of heat transfer. The results showed that the average thermal conductivity of this wood was 0.1257 W/(m·K) under the condition of 12% wood moisture content and 30 °C heat transfer temperature. When the testing temperature exceeded 0 °C, the thermal conductivity increased linearly with both temperature and wood moisture content and was affected by the moisture content of the wood. During the heat transfer process, the deformation of features caused repeated swelling and shrinkage in the longitudinal, radial, and tangential directions. The dimensional change was greatly affected by the wood’s moisture content and was less affected by the temperature. These results are of great meaning for the study of the heat transfer process of Taxodium hybrid ‘Zhongshanshan’ wood. Furthermore, it provides a scientific basis for the heat preservation effect, drying treatment, and pyrolysis treatment of Taxodium hybrid ‘Zhongshanshan’ wood for use as a building material.

Sign in / Sign up

Export Citation Format

Share Document