scholarly journals Impact of planetary boundary layer turbulence on model climate and tracer transport

2015 ◽  
Vol 15 (13) ◽  
pp. 7269-7286 ◽  
Author(s):  
E. L. McGrath-Spangler ◽  
A. Molod ◽  
L. E. Ott ◽  
S. Pawson
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Richardson Number ◽  
Surface Wind ◽  
Specific Humidity ◽  
Boreal Summer ◽  
Tracer Transport ◽  
Bulk Richardson Number ◽  
Turbulent Length Scale ◽  
Near Surface

Abstract. Planetary boundary layer (PBL) processes are important for weather, climate, and tracer transport and concentration. One measure of the strength of these processes is the PBL depth. However, no single PBL depth definition exists and several studies have found that the estimated depth can vary substantially based on the definition used. In the Goddard Earth Observing System (GEOS-5) atmospheric general circulation model, the PBL depth is particularly important because it is used to calculate the turbulent length scale that is used in the estimation of turbulent mixing. This study analyzes the impact of using three different PBL depth definitions in this calculation. Two definitions are based on the scalar eddy diffusion coefficient and the third is based on the bulk Richardson number. Over land, the bulk Richardson number definition estimates shallower nocturnal PBLs than the other estimates while over water this definition generally produces deeper PBLs. The near-surface wind velocity, temperature, and specific humidity responses to the change in turbulence are spatially and temporally heterogeneous, resulting in changes to tracer transport and concentrations. Near-surface wind speed increases in the bulk Richardson number experiment cause Saharan dust increases on the order of 1 × 10−4 kg m−2 downwind over the Atlantic Ocean. Carbon monoxide (CO) surface concentrations are modified over Africa during boreal summer, producing differences on the order of 20 ppb, due to the model's treatment of emissions from biomass burning. While differences in carbon dioxide (CO2) are small in the time mean, instantaneous differences are on the order of 10 ppm and these are especially prevalent at high latitude during boreal winter. Understanding the sensitivity of trace gas and aerosol concentration estimates to PBL depth is important for studies seeking to calculate surface fluxes based on near-surface concentrations and for studies projecting future concentrations.

scholarly journals Impact of planetary boundary layer turbulence on model climate and tracer transport

2014 ◽  
Vol 14 (23) ◽  
pp. 31627-31674
Author(s):  
E. L. McGrath-Spangler ◽  
A. Molod ◽  
L. E. Ott ◽  
S. Pawson
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Richardson Number ◽  
Surface Wind ◽  
Specific Humidity ◽  
Boreal Summer ◽  
Tracer Transport ◽  
Bulk Richardson Number ◽  
Turbulent Length Scale ◽  
Near Surface

Abstract. Planetary boundary layer (PBL) processes are important for weather, climate, and tracer transport and concentration. One measure of the strength of these processes is the PBL depth. However, no single PBL depth definition exists and several studies have found that the estimated depth can vary substantially based on the definition used. In the Goddard Earth Observing System (GEOS-5) atmospheric general circulation model, the PBL depth is particularly important because it is used to calculate the turbulent length scale that is used in the estimation of turbulent mixing. This study analyzes the impact of using three different PBL depth definitions in this calculation. Two definitions are based on the scalar eddy diffusion coefficient and the third is based on the bulk Richardson number. Over land, the bulk Richardson number definition estimates shallower nocturnal PBLs than the other estimates while over water this definition generally produces deeper PBLs. The near surface wind velocity, temperature, and specific humidity responses to the change in turbulence are spatially and temporally heterogeneous, resulting in changes to tracer transport and concentrations. Near surface wind speed increases in the bulk Richardson number experiment cause Saharan dust increases on the order of 1 × 10−4 kg m−2 downwind over the Atlantic Ocean. Carbon monoxide (CO) surface concentrations are modified over Africa during boreal summer, producing differences on the order of 20 ppb, due to the model's treatment of emissions from biomass burning. While differences in carbon dioxide (CO2) are small in the time mean, instantaneous differences are on the order of 10 ppm and these are especially prevalent at high latitude during boreal winter. Understanding the sensitivity of trace gas and aerosol concentration estimates to PBL depth is important for studies seeking to calculate surface fluxes based on near-surface concentrations and to studies projecting future concentrations.

scholarly journals Comparison of GEOS-5 AGCM planetary boundary layer depths computed with various definitions

2014 ◽  
Vol 14 (13) ◽  
pp. 6717-6727 ◽  
Author(s):  
E. L. McGrath-Spangler ◽  
A. Molod
Keyword(s):  
Boundary Layer ◽  
Diffusion Coefficient ◽  
Planetary Boundary Layer ◽  
Richardson Number ◽  
General Circulation ◽  
Circulation Model ◽  
Eddy Diffusion ◽  
Bulk Richardson Number ◽  
Turbulent Length Scale ◽  
Eddy Diffusion Coefficient

Abstract. Accurate models of planetary boundary layer (PBL) processes are important for forecasting weather and climate. The present study compares seven methods of calculating PBL depth in the GEOS-5 atmospheric general circulation model (AGCM) over land. These methods depend on the eddy diffusion coefficients, bulk and local Richardson numbers, and the turbulent kinetic energy. The computed PBL depths are aggregated to the Köppen–Geiger climate classes, and some limited comparisons are made using radiosonde profiles. Most methods produce similar midday PBL depths, although in the warm, moist climate classes the bulk Richardson number method gives midday results that are lower than those given by the eddy diffusion coefficient methods. Additional analysis revealed that methods sensitive to turbulence driven by radiative cooling produce greater PBL depths, this effect being most significant during the evening transition. Nocturnal PBLs based on Richardson number methods are generally shallower than eddy diffusion coefficient based estimates. The bulk Richardson number estimate is recommended as the PBL height to inform the choice of the turbulent length scale, based on the similarity to other methods during the day, and the improved nighttime behavior.

scholarly journals Comparison of GEOS-5 AGCM planetary boundary layer depths computed with various definitions

2014 ◽  
Vol 14 (5) ◽  
pp. 6589-6617 ◽  
Author(s):  
E. L. McGrath-Spangler ◽  
A. Molod
Keyword(s):  
Boundary Layer ◽  
Diffusion Coefficient ◽  
Planetary Boundary Layer ◽  
Richardson Number ◽  
General Circulation ◽  
Circulation Model ◽  
Eddy Diffusion ◽  
Bulk Richardson Number ◽  
Turbulent Length Scale ◽  
Eddy Diffusion Coefficient

Abstract. Accurate models of planetary boundary layer (PBL) processes are important for forecasting weather and climate. The present study compares seven methods of calculating PBL depth in the GEOS-5 atmospheric general circulation model (AGCM) over land. These methods depend on the eddy diffusion coefficients, bulk and local Richardson numbers, and the turbulent kinetic energy. The computed PBL depths are aggregated to the Köppen climate classes, and some limited comparisons are made using radiosonde profiles. Most methods produce similar midday PBL depths, although in the warm, moist climate classes, the bulk Richardson number method gives midday results that are lower than those given by the eddy diffusion coefficient methods. Additional analysis revealed that methods sensitive to turbulence driven by radiative cooling produce greater PBL depths, this effect being most significant during the evening transition. Nocturnal PBLs based on Richardson number are generally shallower than eddy diffusion coefficient based estimates. The bulk Richardson number estimate is recommended as the PBL height to inform the choice of the turbulent length scale, based on the similarity to other methods during the day, and the improved nighttime behavior.

scholarly journals On the computation of planetary boundary-layer height using the bulk Richardson number method

2014 ◽  
Vol 7 (6) ◽  
pp. 2599-2611 ◽  
Author(s):  
Y. Zhang ◽  
Z. Gao ◽  
D. Li ◽  
Y. Li ◽  
N. Zhang ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Boundary Layers ◽  
Planetary Boundary Layer ◽  
Richardson Number ◽  
Potential Temperature ◽  
Bulk Richardson Number ◽  
Stable Boundary Layers ◽  
Stable Boundary ◽  
Field Campaigns ◽  
Weakly Stable

Abstract. Experimental data from four field campaigns are used to explore the variability of the bulk Richardson number of the entire planetary boundary layer (PBL), Ribc, which is a key parameter for calculating the PBL height (PBLH) in numerical weather and climate models with the bulk Richardson number method. First, the PBLHs of three different thermally stratified boundary layers (i.e., strongly stable boundary layers, weakly stable boundary layers, and unstable boundary layers) from the four field campaigns are determined using the turbulence method, the potential temperature gradient method, the low-level jet method, and the modified parcel method. Then for each type of boundary layer, an optimal Ribc is obtained through linear fitting and statistical error minimization methods so that the bulk Richardson method with this optimal Ribc yields similar estimates of PBLHs as the methods mentioned above. We find that the optimal Ribc increases as the PBL becomes more unstable: 0.24 for strongly stable boundary layers, 0.31 for weakly stable boundary layers, and 0.39 for unstable boundary layers. Compared with previous schemes that use a single value of Ribc in calculating the PBLH for all types of boundary layers, the new values of Ribc proposed by this study yield more accurate estimates of PBLHs.

scholarly journals The climatology of planetary boundary layer height in China derived from radiosonde and reanalysis data

2016 ◽  
Author(s):  
Jianping Guo ◽  
Yucong Miao ◽  
Yong Zhang ◽  
Huan Liu ◽  
Zhanqing Li ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Surface Wind ◽  
Surface Wind Speed ◽  
Reanalysis Data ◽  
Near Surface ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Early Afternoon ◽  
Fine Resolution

Abstract. The important roles of planetary boundary layer (PBL) in climate, weather and air quality have long been recognized, but little has been known about the PBL climatology in China. Using the fine-resolution sounding observations made across China and a reanalysis data, we conducted a comprehensive investigation of the PBL in China from January 2011 to July 2015. The boundary layer height (BLH) is found to be generally higher in spring and summer than that in fall and winter. The comparison of seasonally averaged BLH derived from observations and reanalysis shows good agreement. The BLH derived from three- or four-times-daily soundings in summer tends to peak in the early afternoon, and the diurnal amplitude of BLH is higher in the northern and western sub-regions of China than other sub-regions. The meteorological influence on the annual cycle of BLH are investigated as well, showing that BLH at most sounding sites is negatively associated with the surface pressure and lower tropospheric stability, but positively associated with the near-surface wind speed and temperature. This indicates that meteorology plays a significant role in the PBL processes. Overall, the key findings obtained from this study lay a solid foundation for us to gain a deep insight into the fundamentals of PBL in China, which helps understand the roles of PBL playing in the air pollution, weather and climate of China.

scholarly journals Addition of Multilayer Urban Canopy Models to a Nonlocal Planetary Boundary Layer Parameterization and Evaluation Using Ideal and Real Cases

2020 ◽  
Vol 59 (8) ◽  
pp. 1369-1392
Author(s):  
Eric A. Hendricks ◽  
Jason C. Knievel ◽  
Yi Wang
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Surface Wind ◽  
Urban Canopy ◽  
Building Energy ◽  
Energy Model ◽  
Ideal Case ◽  
Near Surface ◽  
Pbl Parameterization ◽  
The Ideal

AbstractThe multilayer urban canopy models (UCMs) building effect parameterization (BEP) and BEP + building energy model (BEM; a building energy model integrated in BEP) are added to the Yonsei University (YSU) planetary boundary layer (PBL) parameterization in the Weather Research and Forecasting (WRF) Model. The additions allow for the first analysis of the detailed effects of buildings on the urban boundary layer in a nonlocal closure scheme. The modified YSU PBL parameterization is compared with the other 1.5-order local PBL parameterizations that predict turbulent kinetic energy (TKE), Mellor–Yamada–Janjić and Bougeault–Lacarerre, using both ideal and real cases. The ideal-case evaluation confirms that BEP and BEP+BEM produce the expected results in the YSU PBL parameterization because the simulations are qualitatively similar to the TKE-based PBL parameterizations in which the multilayer UCMs have long existed. The modified YSU PBL parameterization is further evaluated for a real case. Similar to the ideal case, there are larger differences among the different UCMs (simple bulk scheme, BEP, and BEP+BEM) than across the PBL parameterizations when the UCM is held fixed. Based on evaluation against urban near-surface wind and temperature observations for this case, the BEP and BEP+BEM simulations are superior to the simple bulk scheme for each PBL parameterization.

scholarly journals An Empirical Investigation of Convective Planetary Boundary Layer Evolution and Its Relationship with the Land Surface

2005 ◽  
Vol 44 (6) ◽  
pp. 917-932 ◽  
Author(s):  
Joseph A. Santanello ◽  
Mark A. Friedl ◽  
William P. Kustas
Keyword(s):  
Boundary Layer ◽  
Soil Moisture ◽  
Surface Properties ◽  
Planetary Boundary Layer ◽  
Time Scales ◽  
Land Surface ◽  
Specific Humidity ◽  
Near Surface ◽  
Convective Planetary Boundary Layer ◽  
Daily Time

Abstract Relationships among convective planetary boundary layer (PBL) evolution and land surface properties are explored using data from the Atmospheric Radiation Measurement Program Cloud and Radiation Test Bed in the southern Great Plains. Previous attempts to infer surface fluxes from observations of the PBL have been constrained by difficulties in accurately estimating and parameterizing the conservation equation and have been limited to multiday averages or small samples of daily case studies. Using radiosonde and surface flux data for June, July, and August of 1997, 1999, and 2001, a conservation approach was applied to 132 sets of daily observations. Results highlight the limitations of using this method on daily time scales caused by the diurnal variability and complexity of entrainment. A statistical investigation of the relationship among PBL and both land surface and near-surface properties that are not explicitly included in conservation methods indicates that atmospheric stability in the layer of PBL growth is the most influential variable controlling PBL development. Significant relationships between PBL height and soil moisture, 2-m potential temperature, and 2-m specific humidity are also identified through this analysis, and it is found that 76% of the variance in PBL height can be explained by observations of stability and soil water content. Using this approach, it is also possible to use limited observations of the PBL to estimate soil moisture on daily time scales without the need for detailed land surface parameterizations. In the future, the general framework that is presented may provide a means for robust estimation of near-surface soil moisture and land surface energy balance over regional scales.

scholarly journals Effects of Implementing MODIS Land Cover and Albedo in MM5 at Two Contrasting U.S. Regions

2006 ◽  
Vol 7 (5) ◽  
pp. 1043-1060 ◽  
Author(s):  
Ismail Yucel
Keyword(s):  
United States ◽  
Boundary Layer ◽  
Land Cover ◽  
Planetary Boundary Layer ◽  
Land Surface ◽  
Surface Wind ◽  
The United States ◽  
Error Reduction ◽  
Near Surface ◽  
Temperature And Humidity

Abstract This study implements a new land-cover classification and surface albedo from the Moderate Resolution Imaging Spectroradiometer (MODIS) in the fifth-generation Pennsylvania State University–National Center for Atmospheric Research (PSU–NCAR) Mesoscale Model (MM5) and investigates its effects on regional near-surface atmospheric state variables as well as the planetary boundary layer evolution for two dissimilar U.S. regions. Surface parameter datasets are determined by translating the 17-category MODIS classes into the U.S. Geological Survey (USGS) and Simple Biosphere (SiB) categories available for use in MM5. Changes in land-cover specification or associated parameters affected surface wind, temperature, and humidity fields, which, in turn, resulted in perceivable alterations in the evolving structure of the planetary boundary layer. Inclusion of the MODIS albedo into the simulations enhanced these impacts further. Area-averaged comparisons with ground measurements showed remarkable improvements in near-surface temperature and humidity at both study areas when MM5 is initialized with MODIS land-cover and albedo data. Influence of both MODIS surface datasets is more significant at a semiarid location in the southwest of the United States than it is in a humid location in the mid-Atlantic region. Intense summertime surface heating at the semiarid location creates favorable conditions for strong land surface forcing. For example, when the simulations include MODIS land cover and MODIS albedo, respective error reduction rates were 6% and 11% in temperature and 2% and 2.5% in humidity in the southwest of the United States. Error reduction rates in near-surface atmospheric fields are considered important in the design of mesoscale weather simulations.

Sign in / Sign up

Export Citation Format

Share Document